Home »
Academic Articles & Research Papers
Showing 20 of 23,220 academic articles
Haller Bernhard, Lammel Christoph, Hanssen Henner, Siegrist Monika et al. • BMC Public Health
(2011)
Abstract Background Childhood obesity is not only associated with adult obesity but also with increased risk of adult onset of type 2 diabetes and subsequent coronary heart disease. The potential effects of school-based health intervention ...
DOAJ
Open Access (DOAJ)
DOI: 10.1186/1471-2458-11-258
Sayaka Tada, Kazunori Ikebe, Kei Kamide, Yasuyuki Gondo et al. • PLoS ONE
(2017)
Whereas most of studies investigating relationship between oral health and atherosclerosis have focused on periodontitis, very few of them were examined about occlusal status of natural teeth which possibly influence dietary habit. The prim...
DOAJ
Open Access (DOAJ)
DOI: 10.1371/journal.pone.0182563
Deepanshu Agrawal, Aarti Heda, Sayantan Ghosh, Sonal Kalia et al. • Indian Journal of Ophthalmology
(2023)
Purpose: To assess the knowledge, attitude, and practice patterns (KAPP) of Indian ophthalmologists regarding medicolegal issues using an initial survey. Methods: An online form was circulated among Indian ophthalmologists of all ages over ...
DOAJ
Open Access (DOAJ)
DOI: 10.4103/IJO.IJO_1084_23
Böser Sebastian • EPJ Web of Conferences
(2013)
Even with an accumulated data set from an integrated six years of lifetime from the Auger experiment, no point sources of charged cosmic rays have be identified at the highest energies. Significantly increased apertures such as promised by ...
DOAJ
Open Access (DOAJ)
DOI: 10.1051/epjconf/20125211003
Mapa S.T. Mapa, Magali Araujo, Yang Zhao, Thomas Flynn et al. • MethodsX
(2020)
Fatty acid esters of 3-monochloropropane-1,2-diol (3-MCPD) are chemical contaminants found in a wide range of edible oils that are thermally processed during industrial manufacturing of infant formula and other lipid-containing foods in the...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.mex.2019.100774
Geng Wenfei, Mei Erzhao, Wu Wenbing • Jixie chuandong
(2016)
In order to solve the problem of fault diagnosis of marine gear,a method of comparing 2- D slice of tri- coherency coefficients figure under different frequency of vibration is proposed. Through the sampling data of vibration of marine gear...
DOAJ
Open Access (DOAJ)
Guoping Ding, Yixuan Zhang, Yong Zhu • Advanced Composites Letters
(2019)
The advantages of carbon fiber-reinforced plastic (CFRP) box girders include good bending resistance, lightweight and high strength. Therefore, they are widely used in aerospace, rail transit, and other fields. When the CFRP box girder is s...
DOAJ
Open Access (DOAJ)
DOI: 10.1177/2633366X19891171
Nnamdi C. Aronwora, Chibuzo Nwabufo Okwuosa, Jang-Wook Hur • IEEE Access
(2026)
The rate of capacity fade in a lithium-ion battery following a transition to a new discharge current is widely assumed to equal that of a battery that has always operated at the destination current, an implicit premise referred to here as l...
DOAJ
Open Access (DOAJ)
DOI: 10.1109/ACCESS.2026.3732470
Md. Jisan Mahmud, Ahmed Imtiaz Rais, Md. Rakib Hossain, Sumon Saha • Heliyon
(2022)
The current study investigates conjugate mixed convection heat transmission with internal heat generation in a square enclosure driven by a sliding lid and a solid cylinder with a heat-conducting surface at its center. The enclosure has a s...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.heliyon.2022.e11968
Shuzhi Su, Penglian Gao, Yanmin Zhu, Xingzhu Liang et al. • IEEE Access
(2021)
In multi-view learning, massive literature is devoted to exploring the intrinsic structure between cross-views. It is well known that canonical correlation analysis (CCA) is a conventional multi-view learning method, which considers the cor...
DOAJ
Open Access (DOAJ)
DOI: 10.1109/ACCESS.2021.3118023
Yebing Tian, Chengjin Tian, Sohini Chowdhury, Jinguo Han et al. • Journal of Materials Research and Technology
(2023)
A novel body-armour-like abrasive tool (BAAT) was developed for the high-shear and low-pressure grinding of super alloys with an aim to reduce the ratio of normal force to tangential force. A composite process model was developed based on f...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2023.04.205
Tanimu Kogi Ibrahim, Danjuma Saleh Yawas, Julius Thaddaeus, Bashar Danasabe et al. • Scientific Reports
(2024)
Abstract This study focuses on optimizing double stir casting process parameters to enhance the tensile strength of hybrid composites comprising aluminum alloy, brown pumice, and coal ash, intended for brake disc applications. Analytical te...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41598-024-67476-x
Vu Duy Quang, Ngo Van Hien • Vietnam Journal of Mechanics
(2011)
In this paper, we present a method, which is based on hybrid automata and Real-Time Unified Modeling Language (UML) to analyze and design the control parts of mechatronic systems with input or output events and signals in order to effective...
DOAJ
Open Access (DOAJ)
DOI: 10.15625/0866-7136/33/3/211
Luz Angela Moreno Cueva, Cesar Augusto Peña Cortes, Jarol Derley Ramon Valencia • Prospectiva
(2026)
En este artículo se presenta un estudio piloto para la selección de un método en la toma de pedidos de un restaurante de comidas rápidas en la ciudad de Pamplona. Se realizó un diseño experimental para comparar los indicadores de desempeño ...
DOAJ
Open Access (DOAJ)
DOI: 10.15665/rvgt9394
Ivica Kladarić, Stjepan Golubić, Danko Ćorić, Andrijana Milinović • Metals
(2026)
The article examines the effect of different types of two-layer nanostructured coatings (cVIc and nACVIc) deposited on three types of steel substrates, 45S20, C45E, and 42CrMo4, to determine the resistance to adhesive wear of the substrate/...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/met16020130
Donghwan Song, Adrian Matias Chung Baek, Jageon Koo, Moise Busogi et al. • Applied Sciences
(2020)
Over the past decades, additive manufacturing has rapidly advanced due to its advantages in enabling diverse material usage and complex design production. Nevertheless, the technology has limitations in terms of quality, as printed products...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/app10248951
Syed Bustan Fatima Warsi, Biranchi Panda, Pankaj Biswas • Developments in the Built Environment
(2023)
3D Concrete Printing (3DCP) is a growing field of sustainable technology that offers an avenue for rapid industrialisation of the construction industry. Over the years, many non-structural elements have been fabricated by 3D printing, thus ...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.dibe.2023.100295
M. Iftakhar Alam, Jafrin Sultana • Austrian Journal of Statistics
(2019)
One of the most challenging tasks in clinical trials is finding the maximum tolerated dose (MTD) to be tested in the next phase. An assurance for the safety of the patients and recommendation of a suitable dose for phase II are the main obj...
DOAJ
Open Access (DOAJ)
DOI: 10.17713/ajs.v48i5.883
Stilianos Fodelianakis, Alexander Lorz, Adriana Valenzuela-Cuevas, Alan Barozzi et al. • Nature Communications
(2019)
Fodelianakis et al. examine the role of immigration and selection as the means of community homogenisation in a bacterial metacommunity. They confirmed the role of immigration in homogenisation, even when immigration was four times slower t...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41467-019-09306-7
Rebecca M. Boys, Ngaio J. Beausoleil, Matthew D. M. Pawley, Katherine E. Littlewood et al. • Royal Society Open Science
(2022)
Management of live cetacean strandings generally focuses on refloating animals, yet there is a lack of scientific data to inform decision-making. Valid indicators that are practical to measure are needed to assess welfare status and surviva...
DOAJ
Open Access (DOAJ)
DOI: 10.1098/rsos.220646