Quantum cascade laser absorption studies of nitric oxide production by nanosecond pulsed discharges in air and in combustible mixtures

Overview & Synopsis

Atmospheric pressure plasmas have numerous potential applications. These applications include for instance biomedicine, material processing, environmental biodecontamination and plasma-assisted combustion. The versatility of plasma discharges results from their ability to produce high quantities of active species without increasing the temperature of the gas appreciably. Nanosecond Repetitively Pulsed discharges (NRP) have received great attention owing to their capacity to generate high electron densities, which lead to the creation of a high density of active species such as atomic oxygen. Optical Emission Spectroscopy (OES) showed that excited nitric oxide (NO) was released by NRP discharges in air or in air/fuel mixtures.Although NRP discharges have already been the object of several investigations, the kinetic mechanisms of NO production by NRP discharges at atmospheric pressure remain somewhat unclear. This is one of the motivations for the investigations conducted in this thesis. In addition, NRP discharges were found to produce large amounts of atomic oxygen, which is of great interest for applications such as plasma-assisted combustion. It was shown in particular that thanks to this high production of active species, NRP discharges can effectively stabilize lean flames at atmospheric pressure. However, the production of NO in NRP discharges and in plasma-stabilized flames remains to be investigated. This is the second purpose of this thesis.Absolute and in-situ NO density measurements in atmospheric pressure plasma or/and flame environments are very challenging. Fluorescence-based techniques such as Laser Induced Fluorescence (LIF) require complex calibration methods. These techniques also require the knowledge of the quenching rates of the excited states (particularly at atmospheric pressure), which strongly depend on the temperature, density and nature of the species and can be very different for plasma or/and flame environments. Other techniques, such as chemiluminescence probe sampling also have quenching and calibration issues, and ex-situ UV and IR absorption-based gas analyzers can lead to errors, in particular for radicals.In this study, we developed Quantum Cascade Laser Absorption Spectroscopy (QCLAS) for in-situ nitric oxide absolute density measurements in open-air and in combustion environments. This technique overcomes the difficulties of the previous ones by using high-resolution (10-3 cm-1) rotational-vibrational absorption spectroscopy. This technique presents the advantages of high spectral selectivity, no calibration requirement, and high sensitivity. Two experimental setups were developed to measure NO densities and temperature, (1) within a NRP discharge in air, with 300-µm spatial resolution, and (2) downstream of NRP discharges in air and in plasma-assisted methane/air flames, using multi pass cell. [...]