Reset
Showing 14 of 14 academic articles

Experimental study on unloading induced shear performances of 3D saw-tooth rock fractures

Qian Yin, Xinxin Nie, Jiangyu Wu, Qi Wang et al. • International Journal of Mining Science and Technology (2023)

A fractal model governing saw-tooth fractures was first introduced to replicate sandstone samples containing an inclined 3D penetrating rough fracture surface with various joint roughness coefficients (JRC). In conventional triaxial compres...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.ijmst.2023.02.002

Effect of Ageing on a Novel Cobalt-Free Precipitation-Hardenable Martensitic Alloy Produced by SLM: Mechanical, Tribological and Corrosion Behaviour

Inés Pérez-Gonzalo, Florentino Alvarez-Antolin, Alejandro González-Pociño, Luis Borja Peral-Martinez • Journal of Manufacturing and Materials Processing (2025)

This study investigates the mechanical, tribological, and electrochemical behaviour of a novel precipitation-hardenable martensitic alloy produced by selective laser melting (SLM). The alloy was specifically engineered with an optimised com...

DOAJ Open Access (DOAJ) DOI: 10.3390/jmmp9080261

REVIEW OF MODERN APPROACHES TO DENTAL FLUOROSIS MANAGEMENT

L.F. Kaskova, N.A. Morhun, L.I. Amosova, N.V. Yanko et al. • Український стоматологічний альманах (2019)

Dental fluorosis is caused by ingesting too much fluoride while the teeth are developing. Poltava region belongs to Buchach fluorine hydrogeological province which ground waters are characterized by a high content of fluorine. Such district...

DOAJ Open Access (DOAJ) DOI: 10.31718/2409-0255.3.2019.11

Study of a constrained finite element elbow prosthesis: the influence of the implant placement

Lorenzo Nalbone, Francesco Monac, Luca Nalbone, Tommaso Ingrassia et al. • Journal of Orthopaedics and Traumatology (2023)

Abstract Background The functional results of total elbow arthroplasty (TEA) are controversial and the medium- to long-term revision rates are relatively high. The aim of the present study was to analyze the stresses of TEA in its classic c...

DOAJ Open Access (DOAJ) DOI: 10.1186/s10195-023-00690-x

Synthesize and characterization of hybrid aluminium alloy (AA6063) metal matrix composite (HAMMC) with corn cob ash and alumina (Al2O3) reinforcements

Ayenew Amare, Mezigebu Belay, Zewudu Wondimagegn • Journal of Materials Science: Materials in Engineering (2026)

Abstract The use of aluminium matrix composites (AMCs) in advanced engineering applications has increased due to their improved mechanical properties, such as hardness, ultimate tensile strength, toughness, wear, and corrosion resistance. A...

DOAJ Open Access (DOAJ) DOI: 10.1186/s40712-026-00421-0

The Influence of Applying PVD Coatings on Adhesion Wear Resistance of Quenching and Tempering Steels

Ivica Kladarić, Stjepan Golubić, Danko Ćorić, Andrijana Milinović • Metals (2026)

The article examines the effect of different types of two-layer nanostructured coatings (cVIc and nACVIc) deposited on three types of steel substrates, 45S20, C45E, and 42CrMo4, to determine the resistance to adhesive wear of the substrate/...

DOAJ Open Access (DOAJ) DOI: 10.3390/met16020130

Tribological and flexural characterization of dissimilar AA2024-T3/AA6082-T6 friction stir welded joints

Paritosh Mishra, Brijesh Prasad, Sunil Chamoli, Ibrahim M. Alarifi • Journal of Materials Research and Technology (2026)

The escalating demand for lightweight, high-strength structures in the aerospace and automotive sectors necessitates robust joining technologies for dissimilar aluminium alloys. This study systematically investigates the effects of friction...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2026.08.256

Integrated Geotechnical Approach and GIS for Identification of Geological Resources Exploitable Quarries for Sustainable Development in Ifni Inlier and Lakhssas Plateau (Western Anti Atlas, Morocco)

Mohamed Mahmoud Sebbab, Abdelhadi El Ouahidi, Mehdi Ousbih, Seddik Ouboulahcen et al. • Applied Sciences (2023)

The purpose of this paper is to identify, quantify and delineate the areas with suitable aggregate resources in the Precambrian massif of Ifni and the limestone plateau of Lakhssas (southwest Morocco). To fulfill this objective, a study was...

DOAJ Open Access (DOAJ) DOI: 10.3390/app13063932

Bayesian ANN-Based Prediction and Multi-Objective Optimization of Tribological Behavior in Magnesium Alloy AZ91D at Elevated Temperature Using Pareto GA

Beniyel Muthuraj, Sivapragash Murugesan, Rajesh Rajamony, Michael Thomas Rex Francis • Materials Research (2025)

This study uses an artificial neural network (ANN) model to predict the wear rate and friction coefficient of the magnesium alloy AZ91D, based on experimental data from a pin-on-disc tribometer. The model includes three essential process pa...

DOAJ Open Access (DOAJ) DOI: 10.1590/1980-5373-mr-2025-0388

Manufacturing of a New Generations from the Recycled AL Scrape Reinforced with AL2O3 - GNS Composite Powder by Vortex Technique for Automotive Spare Parts

Fathei Nouh, Omayma El kady, Sabry abdel aziz • International Journal of Industry and Sustainable Development (2024)

This research addresses the urgent challenges facing the materials and metallurgical industries, driving manufacturers to seek innovative solutions for material recycling. Aluminum scrape in used to manufacture a composite material with a h...

DOAJ Open Access (DOAJ) DOI: 10.21608/ijisd.2024.302067.1074

Machine Learning–Based Wear Prediction of Recycled Magnesium Matrix Composites Reinforced With Ceramic Fibers

Meenakshi Sudarvizhi Seenipeyathevar, Prasath Palaniappan, Vijayakumar Arumugam, Vivek Sivakumar et al. • Engineering Reports (2026)

ABSTRACT This study deals with an integrated experimental‐machine learning framework for wear estimation in functionally graded composites made from recycled magnesium machining chips, using low‐cost ceramic fibers as reinforcement with the...

DOAJ Open Access (DOAJ) DOI: 10.1002/eng2.70686

Washability and abrasion resistance of illuminative knitted e-textiles with POFs and silver-coated conductive yarns

Ngan Yi Kitty Lam, Jeanne Tan, Anne Toomey, Ka Chun Jimmy Cheuk • Fashion and Textiles (2022)

Abstract For the integration of conductive yarns in e-textiles, knitting offers structural versatility and malleability for wider product applications in the contexts of wearables and interiors. To enable mass adoption of conductive materia...

DOAJ Open Access (DOAJ) DOI: 10.1186/s40691-022-00313-9

Convergence of Artificial Intelligence and Wearables in Strength Training and Performance Monitoring: A Scoping Review

Eleftherios Fyntikakis, Spyridon Plakias, Themistoklis Tsatalas, Minas A. Mina et al. • Applied Sciences (2026)

Background: Strength training (ST) is essential for enhancing athletic performance and reducing injury risk, yet traditional monitoring relies heavily on subjective assessment, limiting objective and individualized evaluation. Objective: Th...

DOAJ Open Access (DOAJ) DOI: 10.3390/app16073565