Tribological and flexural characterization of dissimilar AA2024-T3/AA6082-T6 friction stir welded joints

Journal: Journal of Materials Research and Technology • • Elsevier • ISSN: 2238-7854

Abstract

The escalating demand for lightweight, high-strength structures in the aerospace and automotive sectors necessitates robust joining technologies for dissimilar aluminium alloys. This study systematically investigates the effects of friction stir welding (FSW) parameters on the tribological and flexural performance of dissimilar AA2024-T3/AA6082-T6 joints. A statistically designed experimental approach and an optimized welding condition were identified and compared with non-optimized joints. Dry sliding wear behaviour and flexural properties were assessed via pin-on-disc tribometry and three-point bending tests, respectively. The SEM and EDS results indicated that the optimized FSW conditions produced a consistent stir zone with a fine-grained structure and a superior metallurgical bond. At lower loading condition the optimized joints showed up to 25% reduction in cumulative wear, coefficient of friction and frictional force as compared to no optimized joints, confirming effective welding parameters. Three-point bending also confirmed superior structural performance of optimized joints, with flexural strength increasing up to 39.20%, enhancing load-bearing capacity and crack resistance. The wear surface characteristics of the optimized joints, as observed in SEM, included shallow grooves and no plastic deformation, indicating improved wear resistance. Ultimately, this work elucidates the critical structure–property relationships that dictate dissimilar FSW joint performance, providing an actionable framework for the design and application of highly durable, lightweight engineering structures subjected to combined mechanical and wear loading.

Subjects & Keywords

How to Cite this Article

Paritosh Mishra, Brijesh Prasad, Sunil Chamoli, et al. (2026). "Tribological and flexural characterization of dissimilar AA2024-T3/AA6082-T6 friction stir welded joints". Journal of Materials Research and Technology. https://doi.org/10.1016/j.jmrt.2026.08.256