Reset
Showing 20 of 165 academic articles

Agarose Gel Characterization for the Fabrication of Brain Tissue Phantoms for Infrared Multispectral Vision Systems

Efraín Albor-Ramírez, Miguel Reyes-Alberto, Luis M. Vidal-Flores, Enoch Gutierrez-Herrera et al. • Gels (2023)

Synthetic phantoms that recreate the characteristics of biological tissues are valuable tools for systematically studying and comprehending physiologies, pathologies, and biological processes related to tissues. The reproduction of mechanic...

DOAJ Open Access (DOAJ) DOI: 10.3390/gels9120944

The Application of Food-Grade Chemical Treatment and Its Effect on the Mechanical Performance Characteristics of Ham Nets

Md. Al-Amin, Charles Freeman, Wes Schilling, Catherine Black et al. • Eng (2021)

This study involves the use of food-grade chemicals in the integrated pest management of dry-cured ham through the use of 100% polyester weft knitted mesh nets, an idea that was derived from a previously published study in the literature. T...

DOAJ Open Access (DOAJ) DOI: 10.3390/eng2040029

Design and characterize of kirigami-inspired springs and the application in vertebrae exoskeleton for adolescent idiopathic scoliosis brace treatment

Qiwen Emma Lei, Jing Shu, Junming Wang, Hoi Yan Cheung et al. • Frontiers in Mechanical Engineering (2023)

Adolescent idiopathic scoliosis is a common condition that affects children between the age of 10 and young adulthood. Rigid brace treatment is an effective treatment to control the progression of spinal deformity. However, it limits mobili...

DOAJ Open Access (DOAJ) DOI: 10.3389/fmech.2023.1152930

Development of Hemp-Containing Denim Fabrics: A Comparative Study of Mechanical and Dimensional Properties

Gamze Okyay Sezer • Journal of Natural Fibers (2026)

Increasing environmental impact of conventional cotton denim production and concerns regarding cotton cultivation under changing climatic conditions have intensified the search for more sustainable raw material alternatives. Hemp is a promi...

DOAJ Open Access (DOAJ) DOI: 10.1080/15440478.2026.2734659

A Probabilistic Fatigue Strength Assessment in AlSi-Cast Material by a Layer-Based Approach

Matthias Oberreiter, Stefan Fladischer, Michael Stoschka, Martin Leitner • Metals (2022)

An advanced lightweight design in cast aluminium alloys features complexly shaped geometries with strongly varying local casting process conditions. This affects the local microstructure in terms of porosity grade and secondary dendrite arm...

DOAJ Open Access (DOAJ) DOI: 10.3390/met12050784

Synthesis and Characterization of a Gel-Type Electrolyte with Ionic Liquid Added for Dye-Sensitized Solar Cells

Le-Yan Shi, Tien-Li Chen, Chih-Hao Chen, Kun-Ching Cho • International Journal of Photoenergy (2013)

This study intends to develop the electrolyte needed in dye-sensitized solar cells (DSSCs). Moreover, three different ionic liquids in different molalities are added to the gel-type electrolyte. Experimental results show that the DSSC compo...

DOAJ Open Access (DOAJ) DOI: 10.1155/2013/834184

Comparative investigation of similar and dissimilar AA6061/AA7075, AA6061/AA2024, and AA6061/AA5083 joints produced by continuous-drive friction welding

Ibrahim Sabry, Abdel-Hamid Ismail Mourad, Mohamed ElWakil • Journal of Materials Research and Technology (2026)

This study considers continuous-drive friction welding to compare AA6061/AA6061, AA6061/AA7075, AA6061/AA2024, and AA6061/AA5083 joints produced under the same nominal processing conditions. Optical and scanning electron microscopy, EDS, XR...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2026.09.145

Use of Experimental Design to Evaluate the Effect of the Incorporation of Quartzite Residues in Ceramic Mass for Porcelain Tile Production

Karina Ruiz Silva, Liszandra Fernanda Araújo Campos, Lisiane Navarro de Lima Santana • Materials Research (2018)

The potential of using quartzite residues in the composition of an industrial ceramic mass for porcelain tile production was investigated through experimental design. Chemical, physical and microstructural analyses were accomplished to unde...

DOAJ Open Access (DOAJ) DOI: 10.1590/1980-5373-mr-2018-0388

A study of aerodynamic noise in air duct systems with turning vanes

Rašuo Boško, Dinulović Mirko, Trninić Marta, Stamenović Marina et al. • FME Transactions (2021)

Noise is becoming one of the problems in many industrial applications. In this paper the aerodynamic noise in air duct system that arises from air flow passing over a surface of turning vanes is investigated. Based on Proudman's formula usi...

DOAJ Open Access (DOAJ) DOI: 10.5937/fme2102308R

Application of Functional Nanomaterials in Aesthetic Art and Industrial Design Concept

Da Gong, Zhenghang Li, Yuyan Song, Jiaheng Han • Advances in Materials Science and Engineering (2022)

Industrial design (ID) refers to industrial product design based on engineering, aesthetics, and economy. Traditional industrial design refers to the creative activities of designing and designing products produced by industrial means to ma...

DOAJ Open Access (DOAJ) DOI: 10.1155/2022/9334608

Evaluation of eco-efficient geopolymer using chamotte and waste glass-based alkaline solutions

Beatryz C. Mendes, Leonardo G. Pedroti, Carlos Maurício F. Vieira, José Maria F. Carvalho et al. • Case Studies in Construction Materials (2022)

Geopolymers are binder materials that can be an alternative to replace Portland cement. They are considered less aggressive to the environment because of the lower emission of CO2 and use of energy in their production chain. This work aimed...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.cscm.2021.e00847

Flat Plate based- Solar System with a tracking system

M. Abdunnabi, A. Abusalama, M. Algamil, M. Almontaser • Solar Energy and Sustainable Development (2018)

Water heating in Libyan domestic sector represents over 29% of the total electrical consumption. There is a great potential of hot water usage in the industrial and other sectors. Solar energy can play vital role in providing hot water to t...

DOAJ Open Access (DOAJ)

Principles of Materials Science and Engineering

William F. Smith • Journal of International Crisis and Risk Communication Research (1986)

This book attempts to provide basic knowledge about the structure, properties, and processing of engineering materials and their applications. The first chapter gives an introduction to materials science and engineering and briefly describe...

OPENALEX Open Access