Home »
Academic Articles »
C »
Design and characterize of kirigami-inspired springs and the application in vertebrae exoskeleton for adolescent idiopathic scoliosis brace treatment
Design and characterize of kirigami-inspired springs and the application in vertebrae exoskeleton for adolescent idiopathic scoliosis brace treatment
Qiwen Emma Lei
(School of Fashion and Textiles, The Hong Kong Polytechnic University, Hung Hom, Hong Kong SAR, China)
Jing Shu
(Department of Biomedical Engineering, The Chinese University of Hong Kong, Shatin, Hong Kong SAR, China)
Junming Wang
(Department of Biomedical Engineering, The Chinese University of Hong Kong, Shatin, Hong Kong SAR, China)
Hoi Yan Cheung
(School of Fashion and Textiles, The Hong Kong Polytechnic University, Hung Hom, Hong Kong SAR, China)
Jason P. Y. Cheung
(Department of Orthopaedics and Traumatology, The University of Hong Kong, Pok Fu Lam, Hong Kong SAR, China)
Wing Fai Wong
(University Research Facility in 3D Printing, Industrial Centre, The Hong Kong Polytechnic University, Hung Hom, Hong Kong SAR, China)
Sanders Cheuk Yin Lau
(Department of Biomedical Engineering, The Chinese University of Hong Kong, Shatin, Hong Kong SAR, China)
Sanders Cheuk Yin Lau
(Department of Aeronautics, Imperial College London, London, United Kingdom)
Joanne Yip
(School of Fashion and Textiles, The Hong Kong Polytechnic University, Hung Hom, Hong Kong SAR, China)
Joanne Yip
(Laboratory for Artificial Intelligence in Design, Hong Kong Science Park, Shatin, Hong Kong SAR, China)
Raymond K. Y. Tong
(Department of Biomedical Engineering, The Chinese University of Hong Kong, Shatin, Hong Kong SAR, China)
Journal: Frontiers in Mechanical Engineering
•
• Frontiers Media S.A.
• ISSN: 2297-3079
Abstract
Adolescent idiopathic scoliosis is a common condition that affects children between the age of 10 and young adulthood. Rigid brace treatment is an effective treatment to control the progression of spinal deformity. However, it limits mobility and causes discomfort, which leads to low treatment compliance. In this study, we developed and characterized a kirigami-inspired CT/MRI compatible spring that could be employed to modify our previously designed exoskeleton hinge vertebrae to provide immediate in-brace correction, good wear comfort, and one that does not inhibit mobility simultaneously. Additive manufacturing has drawn significant interest in academic and industrial terms due to its ability to produce geometrically complex structures. The structural design and dimension of the proposed 3D printed kirigami-inspired springs were optimized with the finite element method (FEM). The carbon-fiber-reinforced nylon material (PA-CF) was selected as the material of the kirigami-inspired spring with the balance of printing easiness and performance of the material. The stiffness of designed kirigami-inspired springs varied between 1.20 and 42.01 N/mm. A case series study with three scoliosis patients has been conducted to investigate the immediate in-brace effect on reducing the spinal curvature and asymmetry of the body contours using radiographic examination. The experiment results show that there are 4.6%–50.5% improvements in Cobb angle for different sections of spines. The X-ray images proved that our kirigami-inspired springs would not block views for Cobb angle measurements.
Qiwen Emma Lei, Jing Shu, Junming Wang, et al. (2023). "Design and characterize of kirigami-inspired springs and the application in vertebrae exoskeleton for adolescent idiopathic scoliosis brace treatment". Frontiers in Mechanical Engineering. https://doi.org/10.3389/fmech.2023.1152930