Home »
Academic Articles & Research Papers
Showing 14 of 14 academic articles
Mandlenkosi G.R. Mahlobo, Lethu Chikosha, Peter A. Olubambi • Journal of Materials Research and Technology
(2022)
Great efforts have been made in fabricating Ti–6Al–4V alloys that can be used in the biomedical implants industry. The increasing interest in using fabricated Ti–6Al–4V alloys in industrial applications is mainly due to the properties of al...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2022.04.004
Yangzhong Jing, Shuliang Wang, Yuyao Chen, Mingyu Bao et al. • International Journal of Electrochemical Science
(2018)
Corrosion product films were formed on P110 casing steels by high-temperature and high-pressure autoclave in a CO2 environment induced by tensile stress. The effects of applied tensile stress on the protection characteristics and electroche...
DOAJ
Open Access (DOAJ)
DOI: 10.20964/2018.08.21
Yao WANG, Xiao-ying YAN, Cheng MAN, Hong-wei ZHANG et al. • 工程科学学报
(2021)
Selective laser fusion (SLM) is an emerging 3D printing technology that can greatly shorten the processing cycle and reduce the production cost of medical implants, thus offering broad prospects for application in the biomedical field. In a...
DOAJ
Open Access (DOAJ)
DOI: 10.13374/j.issn2095-9389.2020.09.29.001
Han Yuyin, Ding Dongyan, Du Jiandi, Gao Yongjin • 上海师范大学学报. 自然科学版
(2017)
Optimizing alloy composition is an effective way to improve physical and chemical properties of automobile heat exchanger materials.A Sm-containing Al-Mn-Si-Fe-Cu alloy was investigated through transmission electron microscopy,scanning elec...
DOAJ
Open Access (DOAJ)
DOI: 10.3969/J.ISSN.1000-5137.2017.06.006
Inés Pérez-Gonzalo, Florentino Alvarez-Antolin, Alejandro González-Pociño, Luis Borja Peral-Martinez • Journal of Manufacturing and Materials Processing
(2025)
This study investigates the mechanical, tribological, and electrochemical behaviour of a novel precipitation-hardenable martensitic alloy produced by selective laser melting (SLM). The alloy was specifically engineered with an optimised com...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/jmmp9080261
Roman Gabor, Ladislav Cvrček, Martina Doubková, Václav Nehasil et al. • Materials & Design
(2022)
This study is focused on the preparation of new hybrid layers intended for surface modification of Ti-6Al-4V alloys for potential orthopaedic and dental applications. Combination of the technology of physical vapour deposition (PVD) and sub...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.matdes.2022.110811
Miaomiao Wang, Xing Ming, Qiao Wang, Hongyao Ding et al. • Journal of Materials Research and Technology
(2024)
Magnesium potassium phosphate cement-based (MKPC) coating is regarded as an attractive green coating that improves the corrosion resistance of metals. Unfortunately, practical use remains challenging owing to the rapid solidification and ha...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2024.11.220
Ayenew Amare, Mezigebu Belay, Zewudu Wondimagegn • Journal of Materials Science: Materials in Engineering
(2026)
Abstract The use of aluminium matrix composites (AMCs) in advanced engineering applications has increased due to their improved mechanical properties, such as hardness, ultimate tensile strength, toughness, wear, and corrosion resistance. A...
DOAJ
Open Access (DOAJ)
DOI: 10.1186/s40712-026-00421-0
PENG Heng, DONG Minghui, ZHANG Maoqi, BAI Mingxian, GUO Jianwei • Cailiao Baohu
(2026)
Sealing is a core factor for the safe operation of high-pressure proton exchange membrane electrolysis cells(PEMECs).To investigate the corrosion behavior of sealing polymer materials,two experimental methods were established: an accelerate...
DOAJ
Open Access (DOAJ)
DOI: 10.16577/j.issn.1001-1560.2026.0015
Fathei Nouh, Omayma El kady, Sabry abdel aziz • International Journal of Industry and Sustainable Development
(2024)
This research addresses the urgent challenges facing the materials and metallurgical industries, driving manufacturers to seek innovative solutions for material recycling. Aluminum scrape in used to manufacture a composite material with a h...
DOAJ
Open Access (DOAJ)
DOI: 10.21608/ijisd.2024.302067.1074
Qian Zheng, Chao Lu, Yan Yin, Xiaoli Cui et al. • Journal of Materials Research and Technology
(2025)
As a candidate cladding material for fourth-generation nuclear energy systems, the microstructure and properties of oxide dispersion strengthened 316L (ODS-316L) steel are significantly affected by heat treatment (HT) processes. This paper ...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2025.09.256
Jun Dai, Banglong Yu, Wei Jiang, Hla Min Htun et al. • Advances in Materials Science and Engineering
(2019)
In this paper, dissimilar metal joints of 6061 aluminum alloy and aluminum matrix composite material are investigated by laser welding. TiB2 particles were added into the lap joint. The welding process, microstructure, and the corrosion pro...
DOAJ
Open Access (DOAJ)
DOI: 10.1155/2019/2359841
Pedro J. Rivero, Deyo Maeztu Redin, Rafael J. Rodríguez • Metals
(2020)
The use of surface engineering techniques to tune-up the composition of nanostructured thin-films for developing functional coatings with advanced properties is a hot topic within the scientific community. The control of the coating structu...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/met10030350
Malihe Zeraati, Hossein Abbasi, Parvin Ghaffarzadeh, Narendra Pal Singh Chauhan et al. • Frontiers in Materials
(2022)
Zn–Ni electrophosphate coating is one of the most commonly used materials in industrial applications. The corrosion resistance of this coating is very important in order to achieve the minimum corrosion current of the Zn–Ni electrophosphate...
DOAJ
Open Access (DOAJ)
DOI: 10.3389/fmats.2022.823155