Home »
Academic Articles & Research Papers
Showing 20 of 56 academic articles
S. Maksimov, V. Shaposhnikov, V. Borisenko • Доклады Белорусского государственного университета информатики и радиоэлектроники
(2026)
Film heterostructures made of polymethyl methacrylate and low-density polyethylene with incorporated micron-sized particles of a semiconductor (graphite-like carbon nitride g-C3N4), fabricated using a component mixing and casting technique,...
DOAJ
Open Access (DOAJ)
DOI: 10.35596/1729-7648-2026-24-3-36-43
Carolina Vasco Costa Delgado, Gabriela Alexandra da Cunha Santos Forman, Rebecca Louise Antoinette Breuer • Convergências - Revista de Investigação e Ensino das Artes
(2022)
This study explores bioplastics fabrication based on alginate polymer with added glycerine as a plasticizer, creating flexibility, and organic waste was used as a filler avoiding shrinkage.
Exploratory, observational and experimental, Lit...
DOAJ
Open Access (DOAJ)
DOI: 10.53681/c1514225187514391s.29.133
Ariharasudhan Subramanian, Senthil Kumar Selvaraj, Rajaram Mani, Preethibha Chandrasekaran et al. • Journal of Natural Fibers
(2024)
This study investigates the synthesis and characterization of composite materials, pigeon pea stem, and cotton fibers blended in different ratios such as 100/0, 70/30, 60/40, 50/50, 30/70, and 0/100. These composite materials were produced ...
DOAJ
Open Access (DOAJ)
DOI: 10.1080/15440478.2024.2333940
Kabilan B, Ayyar M, Sakthivel S, Patil RP et al. • RSC advances
(2026)
PMC
PMC Public Access (View-Only)
DOI: 10.1039/d6ra05505b
PMC: PMC13682314
Гітіс МІЛЯУСКАС, Гінтарас ДЕНАФАС • Ecology, Human, Society
(2024)
Waste Printed Circuit Boards (WPCBs) are integral components of virtually all electrical and electronic equipment (EEE), forming the structural backbone of the electronics industry. Classified into single-sided, double-sided, multilayer, ri...
DOAJ
Open Access (DOAJ)
DOI: 10.20535/EHS2710-3315.2024.306206
Arslan Kaptan, Fuat Kartal • European Mechanical Science
(2024)
This review article provides a comprehensive examination of the latest advancements in the research and development of Polylactic Acid (PLA) and its composites, with a focus on enhancing material properties and exploring sustainable applica...
DOAJ
Open Access (DOAJ)
DOI: 10.26701/ems.1440630
William F. Smith • Journal of International Crisis and Risk Communication Research
(1986)
This book attempts to provide basic knowledge about the structure, properties, and processing of engineering materials and their applications. The first chapter gives an introduction to materials science and engineering and briefly describe...
OPENALEX
Open Access
ZHU Hongye, WANG Xiaoxu, LYU Jixiang, HAO Shulei • Xi'an Gongcheng Daxue xuebao
(2025)
To study the influence of edge effects on the resin filling flow pattern in the RTM process of composite materials, the finite element software PAM-RTM was used to simulate and analyze the impregnation process of the blade preforms in RTM.B...
DOAJ
Open Access (DOAJ)
DOI: 10.13338/j.issn.1674-649x.2025.04.002
Yash Vishnoi, Alok Kumar Trivedi, M.K. Gupta, Harinder Singh et al. • Heliyon
(2024)
In the present decades, nanocellulose has been very popular in the field of nanotechnology and is receiving much attention from researchers because of its advantageous physicochemical properties, high aspect ratio, and high specific strengt...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.heliyon.2023.e23846
Pamela Nair Silva-Holguín, Simón Yobanny Reyes-López • Dose-Response
(2020)
Innovative and improved antimicrobial agents by nanotechnology are developed to control and mitigation of resistant microorganisms. Nanoparticles of metals or oxide metals be able to be toxic to bacteria, demonstrating biocidal behaviors at...
DOAJ
Open Access (DOAJ)
DOI: 10.1177/1559325820951342
Spyridoula G. Farmaki, Dimitrios A. Exarchos, Vasileios Dracopoulos, Anastasios Gkotzamanis et al. • Applied Mechanics
(2026)
Recent advances in nanotechnology have highlighted the transformative potential of carbon-based nanomaterials, such as carbon nanofibers, carbon nanotubes, and graphene, in cementitious systems. These materials have shown a remarkable abili...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/applmech7010013
Xianhui Zhao, Oluwafemi Oyedeji, Erin Webb, Sanjita Wasti et al. • Composites Part C: Open Access
(2022)
Owing to its low cost and sustainable nature, lignocellulosic biomass has been utilized for reinforcing polymers, but it is crucial to understand the impact of high-ash concentrations in biomass on composite strength and processing. Biomass...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jcomc.2022.100319
Mohd Rosli Mohd Hasan, Zhanping You, Mohd Khairul Idham Mohd Satar, Muhammad Naqiuddin Mohd Warid et al. • Applied Sciences
(2018)
This study was initiated to evaluate the performance of asphalt binders and mixtures incorporating linear low-density polyethylene- calcium carbonate (LLDPE-CaCO3) pellet, either with or without titanate coupling agent. The detailed manufac...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/app8071029
Longping Yan, Muwang Wei, Lei Huang, Huawei Li et al. • KSCE Journal of Civil Engineering
(2026)
This review systematically examines the role of bamboo fiber (BF) in enhancing the performance of cement-based composites, with a particular focus on workability, mechanical properties, durability, and sustainability. BF, as a renewable and...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.kscej.2026.100676
Samarth Urs M, Nagendra P, B.V. Suresh Kumar • Results in Earth Sciences
(2025)
We present mapping and comparision of the geology of the southern block of the Chitradurga schist belt (CSB). We have used ASTER images and geophysical data to compare the geology. Consequently, present study confirms how remote sensing int...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.rines.2025.100117
ShuLei Sun, Kesheng Zhang, Shunke Zhang, Ning Tian et al. • Materials Research Express
(2026)
Magnetorheological elastomers (MREs) are field-responsive composites whose stiffness can be tuned by a magnetic field. In chain-like MREs, strong local magnetic interactions and Maxwell tractions do not necessarily translate into a measurab...
DOAJ
Open Access (DOAJ)
DOI: 10.1088/2053-1591/aeb47a
Yaya Wu, Yan Wen, Anan Guo, Jian Zhou et al. • Journal of Materials Research and Technology
(2023)
This work used electroshocking treatment (EST) plus external loading to regulate the microstructure of titanium matrix composites (TMCs). The external loading was 0.3 MPa. After EST plus external loading with 0.3 MPa, the α was reduced to 2...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2023.10.177
Deyu Jiang, Miao Luo, Changxi Liu, Yashuo Zhang et al. • Virtual and Physical Prototyping
(2025)
In this study, a Ti1.5Nb1Ta0.5Zr1Mo0.5 (TNTZM) high-entropy alloy was fabricated using laser powder bed fusion (LPBF). By integrating 63 sets of parameter trials with machine learning (ML) models, an optimised process window was identified,...
DOAJ
Open Access (DOAJ)
DOI: 10.1080/17452759.2025.2524524
Matthew Dvorsky, Daniela Munalli, Mohammad Tayeb Al Qaseer, Reza Zoughi • IEEE Open Journal of Instrumentation and Measurement
(2022)
In this paper synthetic aperture radar (SAR) polarimetry techniques are applied to detect and characterize fiber misalignment in both carbon fiber sheets and glass fiber reinforced polymer (GFRP) composites. The principle behind SAR polarim...
DOAJ
Open Access (DOAJ)
DOI: 10.1109/OJIM.2022.3184347
CHEN Qiang, LI Shun, ZHU Li'an, BAI Shuxin et al. • Cailiao gongcheng
(2023)
As one kind of advanced high temperature structural and functional materials, it is necessary for fiber reinforced silicon carbide matrix composites (SiC CMCs) in the field of thermal management (TM) to combine the efficient heat transfer a...
DOAJ
Open Access (DOAJ)
DOI: 10.11868/j.issn.1001-4381.2023.000079