Academic Articles & Research Papers

Study on the preparation of multifunctional bacterial cellulose-based wound dressings and their in vitro hemostatic performance

Abstract Bacterial cellulose (BC) is a favored material for medical wound dressings due to its biocompatibility and water-holding capacity, yet it lacks inherent antibacterial and hemostatic capabilities. To enhance its functionality, a nov...

Dielectric‐Confinement‐Induced in‐Plane Photoelectric Anisotropy in Isotropic Quasi‐1D γ‐GaS Nanoribbon

ABSTRACT The growing demand for polarized photodetection has driven the need for compact, integrated, and multifunctional device architectures. Although one‐dimensional (1D) materials are of significant interest for their innate polarizatio...

A novel fabrication technique for three-dimensional concave nanolens arrays

A novel facile technique is proposed for fabricating three-dimensional (3D) concave nanolens arrays on a silicon substrate. The technique leverages an inherent characteristic of the polymethyl methacrylate (PMMA) resist during inductively c...

Achieving high thermal conductivity of Al–50Si alloy through heat treatment and its microstructural evolution

Al–50Si alloys were prepared by powder extrusion and characterized for electronic packaging. The optimization of powder size, extrusion temperature, and heat treatment parameters was performed to enhance the microstructure and thermo-physic...

From neuromodulation to bone homeostasis: therapeutic targets of nerve growth factor in skeletal diseases

The skeletal system is an important support structure in the human body, and its homeostatic state is highly relevant to the development of a wide range of orthopaedic diseases. The search for key regulatory factors associated with skeletal...

OPTIMIZATION OF HOT AIR SOLDER LEVELING (HASL) MACHINE FOR A ROBUST SURFACE FINISH IN SOLDERING APPLICATIONS

Hot Air Solder Leveling (HASL) is one of the most commonly used surface finishes in the industry. HASL is also one of the least expensive types of PCB surface finishes available. This study aims to examine the influence on the solder joint ...

Photoresponsive Biomimetic Soft Robots Enabled by Near‐Infrared‐Driven and Ultrarobust Sandwich‐Structured Nanocomposite Films

Soft robots, intelligent structures built up of smart soft materials, are capable of being programmed to perform delicate work. Recently, plenty of biomimetic soft robots with functionalities of grasping, sensing, searching, and transportin...

Effect of rare earth elements on the segregation behavior and microstructure of super austenitic stainless steel

Super austenitic stainless steel (SASS) was prepared by non-consumable vacuum arc melting for the first time. The effects of rare earth (RE) elements on its solidification microstructure and segregation behavior were investigated. The σ pha...

Phase prediction, microstructure and high hardness of novel light-weight high entropy alloys

Guided by CALPHAD modeling, low-density and multiphase three novel High Entropy Alloys (HEAs), Al40Cu15Cr15Fe15Si15, Al65Cu5Cr5Si15Mn5Ti5 and Al60Cu10Fe10Cr5Mn5Ni5Mg5 were produced by large scale vacuum die casting. A mixture of simple and ...

Effects of Annealing and Deformation on Sagging Resistance of a Hot-Rolled, Four-Layered Al Alloy Clad Sheet

Multilayer brazeable aluminum alloy sheet is prone to collapse during high-temperature brazing process. The sagging resistance of the aluminum composite sheet needs to be further improved for quality control. Effects of annealing and rate o...

Fundamentals of Materials Science and Engineering : An Integrated Approach

Chapter 1 - Introduction. 1.1 Historical Perspective 1.2 Materials Science and Engineering 1.3 Why Study Materials Science and Engineering? 1.4 Classification of Materials Materials of Importance-Carbonated Beverage Containers 1.5 Advanced ...

Foundations of Materials Science and Engineering

1 Introduction to Materials Science and Engineering 2 Atomic Structure and Bonding 3 Crystal and Amorphous Structures in Materials 4 Solidification, Crystalline Imperfections 5 Thermally Activated Processes and Diffusion in Solids 6 Mechani...

Materials Science and Engineering: An Introduction

List of Symbols.Introduction.Atomic Structure and Interatomic Bonding.The Structure of Crystalline Solids.Imperfections in Solids.Diffusion.Mechanical Properties of Metals.Dislocations and Strengthening Mechanisms.Failure.Phase Diagrams.Pha...

Journal of Materials Science and Engineering A

The Journal of Materials Science and Engineering is an international, scholarly, and peer-reviewed journal (print and online) published monthly by David Publishing Company, USA which was founded in 2007. It provides an international medium ...

Thermal Phase Behavior, Structure, Acidity, and Quantum Chemical Insights into Novel Hydroxylamine Hydrochloride (HACl)-Methanesulfonic Acid (MSA) Deep Eutectic Solvents.

On the Challenges of Quantum Circuit Encoding Using Deep and Reinforcement Learning

Quantum computers may solve some computing tasks more efficiently than classical com- puters, but to do so requires the design of appropriate quantum circuits. However, it is hard to design even simple quantum programs. Recent results have ...

QC-MM: A Metadata and Schema Model for Traceable Quantum-Circuit Experiments

Context: Modern quantum-computing experimentation generates heterogeneous, context-dependent execution data whose scientific value depends on preserving calibration state, compilation decisions, and run outcomes in a traceable and repositor...

A Survey of Universal Quantum von Neumann Architecture

The existence of universal quantum computers has been theoretically well established. However, building up a real quantum computer system not only relies on the theory of universality, but also needs methods to satisfy requirements on other...

An introduction to Bayesian simulation-based inference for quantum machine learning with examples

Simulation is an indispensable tool in both engineering and the sciences. In simulation-based modeling, a parametric simulator is adopted as a mechanistic model of a physical system. The problem of designing algorithms that optimize the sim...

Quantum computing enhanced computational catalysis

The quantum computation of electronic energies can break the curse of dimensionality that plagues manyparticle quantum mechanics.It is for this reason that a universal quantum computer has the potential to fundamentally change computational...