Home »
Academic Articles »
C »
OPTIMIZATION OF HOT AIR SOLDER LEVELING (HASL) MACHINE FOR A ROBUST SURFACE FINISH IN SOLDERING APPLICATIONS
OPTIMIZATION OF HOT AIR SOLDER LEVELING (HASL) MACHINE FOR A ROBUST SURFACE FINISH IN SOLDERING APPLICATIONS
Mohd Izrul Izwan RAMLI
(Faculty of Chemical Engineering Technology, Universiti Malaysia Perlis (UniMAP), Perlis 02600, Malaysia)
Siti Farahnabilah MUHD AMLI
(Faculty of Chemical Engineering Technology, Universiti Malaysia Perlis (UniMAP), Perlis 02600, Malaysia)
Norainiza SAUD
(Faculty of Chemical Engineering Technology, Universiti Malaysia Perlis (UniMAP), Perlis 02600, Malaysia)
Dewi Suriyani CHE HALIN
(Geopolymer & Green Technology, Center of Excellence (CEGeoGTech), Universiti Malaysia Perlis (UniMAP), Perlis 02600, Malaysia)
Nur Akrimi Maswa MD FAUZI
(Geopolymer & Green Technology, Center of Excellence (CEGeoGTech), Universiti Malaysia Perlis (UniMAP), Perlis 02600, Malaysia)
Journal: European Journal of Materials Science and Engineering
•
• Politehnium Publishing House
• ISSN: 2537-4338
Abstract
Hot Air Solder Leveling (HASL) is one of the most commonly used surface finishes in the industry. HASL is also one of the least expensive types of PCB surface finishes available. This study aims to examine the influence on the solder joint microstructure of dipping time and solder temperature. During soldering process, the temperature that used were 300°C and 400°C. The dipping time was split into three batches which is 20s, 60s, and 100s. The Sn-0.7Cu0.05Ni solder alloy was used in this analysis to shape the solder coating microstructure. In this analysis, an Optical Microscope (OM) was used to determine the microstructure of the shape of the solder coating microstructure. As dipping time and dipping speed increased, the interfacial IMC thickness was found to increase, grown up and getting thicker. This outcome results can be used as the basis in order to improve the solder joint properties.
Mohd Izrul Izwan RAMLI, Siti Farahnabilah MUHD AMLI, Norainiza SAUD, et al. (2023). "OPTIMIZATION OF HOT AIR SOLDER LEVELING (HASL) MACHINE FOR A ROBUST SURFACE FINISH IN SOLDERING APPLICATIONS". European Journal of Materials Science and Engineering. https://doi.org/10.36868/ejmse.2023.08.01.030