Academic Articles & Research Papers

Sustainable re-use of waste glass, cement and lime treated dredged material as pavement material

The amount of waste materials such as dredged materials (DM) and waste glass (WG) have been growing exponentially since the middle of the 20th century. The most important problem created by them is the lack of space to be used for storage b...

Preparation and adsorption application of PLA/GO/PDA nanofiber membrane

In this study, polylactic acid/graphene oxide/Dopamine (PLA/GO/DA) porous nanofiber membrane was prepared by electrospinning. L _16 (4 ^3 ) orthogonal experiment was designed to investigate the effects of reaction temperature, reaction time...

Recognition of Faces in Unconstrained Environments: A Comparative Study

The aim of this work is to carry out a comparative study of face recognition methods that are suitable to work in unconstrained environments. The analyzed methods are selected by considering their performance in former comparative studies, ...

高压开关行业工艺突破口工作诊断交流会在西安召开

为了进一步贯彻执行机械电子工业部机电科（1989）1号文件关于在治理整顿、改革开放的新形势下,继续深入开展“工艺突破口”工作的通知精神,促进电工行业工艺突破口工作向纵深发展,向新的目标前进。机械电子部第一装备司,于1989年5月24～27日在西安召开了高压开关行业工艺突破口工作诊断交流会议。有关高压开关制造厂、专业研究所、设计院、西...

Remaining Useful Life Prediction for Nonlinear Degraded Equipment With Bivariate Time Scales

As the fundamental and prerequisite work of remaining useful life (RUL) prediction, degradation modeling directly affects the accuracy of RUL prediction. Existing degradation models are all developed under a single time scale, and less rese...

INFLUENCE OF ACTIVE MODIFICATION PARAMETERS ON BEARING CHARACTERISTICS OF OPPOSITE GEAR PAIRS (MT)

Active gear design is a method that can pre-control gear meshing performance directly. In order to study the influence of active gear design on the bearing characteristics of tooth surface, the relationship between active modification param...

Misalignment Tolerance and Interoperability of Wireless Charging System Based on Two-Channel Topology and Coil Optimization

Inductive power transfer (IPT), as a method of wireless power transfer (WPT) via magnetic induction, can be applied to electric vehicles (EVs) due to its convenience and automation. Interoperability and misalignment tolerance are both major...

Gasification of Lignocellulosic Waste in Supercritical Water: Study of Thermodynamic Equilibrium as a Nonlinear Programming Problem

As one of the main industrial segments of the current geoeconomics scenario, agro-industrial activities generate excessive amounts of waste. The gasification of such waste using supercritical water (SCWG) has the potential to convert the wa...

Boost Converter Fed High Performance BLDC Drive for Solar PV Array Powered Air Cooling System

This paper proposes the utilization of a DC-DC boost converter as a mediator between a Solar Photovoltaic (SPV) array and the Voltage Source Inverters (VSI) in an SPV array powered air cooling system to attain maximum efficiency. The boost ...

Electrical Properties of Electrospun Fibers of PANI-PMMA Composites

Electrospinning is one of the simplest techniques for obtaining polymer nano fibers. Nanofibers have large surface area to volume ratio and hence have excellent application potential in sensors, filter design etc. Polyaniline (PANI) is the ...

Design and Analysis of a New Dual-Stator Hybrid Magnet Flux Modulation Machine

This paper proposes a new dual-stator hybrid-magnet flux modulation machine (DS-FMHMM) for direct-drive applications, which employs NdFeB magnet excitation and Ferrite magnet excitation on the rotor and outer stator sides, respectively. Wit...

The mining of materials with similar electronic properties from the Crystallographic Open Database (COD)

The finding of a material with the precise properties needed to solve a specific issue is the first topic that needs unraveling when an application is projected. One approach to find a material with a specific property value is to study a d...

A Novel Partitioning Approach in Active Distribution Networks for Voltage Sag Mitigation

The growing emphasis on power quality has posed significant challenges for distribution system operators (DSOs). Among these challenges, short-term voltage fluctuations, specifically voltage sag, have drawn considerable attention. In this s...

Investigation of single bubble behavior under rolling motions using multiphase MPS method on GPU

Study of single bubble behavior under rolling motions can prove useful for fundamental understanding of flow field inside the modern small modular nuclear reactors. The objective of the present study is to simulate the influence of rolling ...

腔稳固体负阻振荡器

VARIATIONAL METHODS IN NUCLEAR ENGINEERING

Nuclear engineering : engineering applications of nuclear energy

http://deepblue.lib.umich.edu/bitstream/2027.42/5896/5/bac5623.0001.001.pdf...

Fuzzy Systems and Soft Computing in Nuclear Engineering

Fuzzy systems and soft computing are new computing techniques that are tolerant to imprecision, uncertainty and partial truths. Applications of these techniques in nuclear engineering present a tremen...

Nuclear Engineering at Lowell Technological Institute

Get PDF Email Share Share with Facebook Tweet This Post on reddit Share with LinkedIn Add to CiteULike Add to Mendeley Add to BibSonomy Get Citation Copy Citation Text , "Nuclear Engineering at Lowell Technological Institute," J. Opt. Soc. ...

Nuclear Engineering Monographs