Home »
Academic Articles & Research Papers
Showing 20 of 23,220 academic articles
О.А. Золотарева • Экономика и банки
(2015)
В статье рассмотрены проблемы перехода белорусских банков на международные стандарты финансовой отчетности, в частности, вопросы учета кредитов и условных обязательств кредитного характера на основе
требований МСФО 39 «Финансовые инструмен...
DOAJ
Open Access (DOAJ)
ShuLei Sun, Kesheng Zhang, Shunke Zhang, Ning Tian et al. • Materials Research Express
(2026)
Magnetorheological elastomers (MREs) are field-responsive composites whose stiffness can be tuned by a magnetic field. In chain-like MREs, strong local magnetic interactions and Maxwell tractions do not necessarily translate into a measurab...
DOAJ
Open Access (DOAJ)
DOI: 10.1088/2053-1591/aeb47a
Shuanfeng Zhao, Jiaojiao Zhao, Jiaojiao Zhao, Zhengxiong Lu et al. • Frontiers in Energy Research
(2022)
The cooperative control of shearer and scraper conveyors is the prerequisite for the realization of intelligent comprehensive mining equipment and unmanned comprehensive mining workings. However, because of the harsh working face environmen...
DOAJ
Open Access (DOAJ)
DOI: 10.3389/fenrg.2022.811648
Wonseok Yang • Applied Sciences
(2021)
This study presents a method to predict the flow velocity in a fluid-conveying pipe using vibration signals from the pipe surface. The flexural vibration of a fluid pipe is investigated through wave propagation. The wavenumbers and mode sha...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/app11135779
Yaya Wu, Yan Wen, Anan Guo, Jian Zhou et al. • Journal of Materials Research and Technology
(2023)
This work used electroshocking treatment (EST) plus external loading to regulate the microstructure of titanium matrix composites (TMCs). The external loading was 0.3 MPa. After EST plus external loading with 0.3 MPa, the α was reduced to 2...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2023.10.177
Mahdi Mottaghipour • آموزش مهندسی ایران
(2016)
Although 3D printing is only two decades old, dramatic improvements have occurred in the production cycle. At the present time many big industrial centers, such as the automotive industry, medical equipment industry, military industries, as...
DOAJ
Open Access (DOAJ)
DOI: 10.22047/ijee.2016.16243
Qi Chen, Wenfeng Tian, Wuwei Chen, Qadeer Ahmed et al. • Sensors
(2018)
The anti-lock braking system (ABS) is an essential part in ensuring safe driving in vehicles. The Security of onboard safety systems is very important. In order to monitor the functions of ABS and avoid any malfunction, a model-based method...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/s18124468
Deyu Jiang, Miao Luo, Changxi Liu, Yashuo Zhang et al. • Virtual and Physical Prototyping
(2025)
In this study, a Ti1.5Nb1Ta0.5Zr1Mo0.5 (TNTZM) high-entropy alloy was fabricated using laser powder bed fusion (LPBF). By integrating 63 sets of parameter trials with machine learning (ML) models, an optimised process window was identified,...
DOAJ
Open Access (DOAJ)
DOI: 10.1080/17452759.2025.2524524
Soo-Lim Lee, Bong-Ju Kim, Seon-Bong Lee • Machines
(2022)
There is an increasing need for securing development technology for suitable materials to obtain more productive and lightweight automobile parts, including hydrogen fuel cell stack enclosures. Due to the poor moldability of Poly-Phenylene ...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/machines10080625
Xiao-Xiao Han, Jia Qiao, Zhan-Ao Meng, Dong-Mei Pan et al. • Brain Sciences
(2023)
Objectives: Investigate the biomechanical characteristics in tracheostomized patients with aspiration following acquired brain injury (ABI) and further explore the relationship between the biomechanical characteristics and aspiration. Metho...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/brainsci13010091
Chengliang Zhang, Guanlei Gao, Chunzhao Zhao, Lei Li et al. • Machines
(2022)
This paper presents a path tracking algorithm based on a fuzzy control pure tracking model for autonomous navigation of 4WS agricultural machines. The aim of this research is to implement path tracking for unmanned 4WS agricultural machiner...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/machines10070597
Susana Aberturas, José Luis Olazagoitia, Miguel Ángel García, Antonio Hernando • Magnetochemistry
(2023)
In the automobile sector, energy recovery and sustainability are becoming more and more important, and energy-harvesting suspension systems (EHSAs) have a lot of promise to improve vehicle efficiency. This investigation expands on prior wor...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/magnetochemistry9070189
Limin Geng, Shiyu Shan, Zongxue Yan, Nan Gao et al. • Energy Science & Engineering
(2026)
ABSTRACT The widespread adoption of hydrogen fuel cell trucks (HFCTs) depends on addressing hydrogen safety concerns, particularly in confined spaces like tunnels, where effective ventilation is crucial to prevent accumulation during leaks....
DOAJ
Open Access (DOAJ)
DOI: 10.1002/ese3.70547
Roberto López-Chila, Henry Abad-Reyna, Joao Morocho-Cajas, Pablo Fierro-Jimenez • Vehicles
(2025)
Standardized driving cycles such as the FTP-75 fail to represent traffic conditions in cities like Guayaquil, where high congestion and varied driving behaviors are not captured by external models. This study aimed to develop representative...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/vehicles7030095
Chaoqun Zeng, Jing-Pu Tang, Liangliang Wei, Miaochang Zhu et al. • Buildings
(2026)
Reinforced concrete (RC) beams strengthened with carbon-fabric-reinforced cementitious matrix (CFRCM) systems have shown potential for restoring flexural performance, yet their effectiveness under different corrosion levels remains insuffic...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/buildings16020377
Guojing Hu, Kun Li, Weike Lu, Ouchan Chen et al. • World Electric Vehicle Journal
(2025)
Collision avoidance between vehicles is a great challenge, especially in the context of mixed driving of connected and autonomous vehicles (CAVs) and human-driven vehicles (HVs). Advances in automation and connectivity technologies provide ...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/wevj16070394
Yuqi Guo, Bin Li, Matthew Daniel Christie, Zongzhi Li et al. • Sensors
(2020)
This paper introduces a new methodology for reconstructing vehicle densities of freeway segments by utilizing the limited data collected by traffic-counting sensors and developing a macroscopic traffic stream model formulated as a switched ...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/s20061609
Shihao Liang, Liang Gao, Yongfeng Zheng, Hao Li • Applied Sciences
(2020)
In recent years, the functionally graded materials (FGM) with cellular structure have become a hot spot in the field of materials research. For the continuously varying cellular structure in the layer-wise FGM, the connection of gradient ce...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/app10217449
M. G. El-Sherbiny, Farouk Hammad, M. M. Youssef, M. K. Mohamed et al. • Journal of the Egyptian Society of Tribology
(2026)
The present study examines the temper colors of the wear particles retained by the oil filter by optical microscope. The temperature of the sliding surfaces inside engines can be determined by the temper colors of the wear particles. Becaus...
DOAJ
Open Access (DOAJ)
DOI: 10.21608/jest.2026.481011.1158
Pengyu Ren, Xuyun Qiu, Qi Gao, Yumin Song • Agriculture
(2025)
With the continuous expansion of the orchard planting area, there is an urgent need for autonomous orchard vehicles that can reduce the labor intensity of fruit farmers and improve the efficiency of operations to assist operators in the pro...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/agriculture15141529