Reset
Showing 20 of 3,033 academic articles

On Security and Throughput for Energy Harvesting Untrusted Relays in IoT Systems Using NOMA

Van Nhan Vo, Chakchai So-In, Hung Tran, Duc-Dung Tran et al. • IEEE Access (2019)

In this paper, we analyze the secrecy and throughput of multiple-input single-output (MISO) energy harvesting (EH) Internet of Things (IoT) systems, in which a multi-antenna base station (BS) transmits signals to IoT devices (IoTDs) with th...

DOAJ Open Access (DOAJ) DOI: 10.1109/ACCESS.2019.2946600

Influence of Radar Parameters and Sea State on Wind Wave-Induced Velocity in C-Band ATI SAR Ocean Surface Currents

Rui Zhang, Jie Zhang, Xi Zhang, Chenghui Cao et al. • Remote Sensing (2022)

Wind wave-induced artifact surface velocity (WASV) is an important component of the sea surface motions detected by synthetic aperture radar (SAR) systems. Understanding the characteristics of the interference of WASV on SAR current velocit...

DOAJ Open Access (DOAJ) DOI: 10.3390/rs14174135

Perbandingan Simple Logistic Classifier dengan Support Vector Machine dalam Memprediksi Kemenangan Atlet

Ednawati Rainarli, Arif Romadhan • Journal of Information Systems Engineering and Business Intelligence (2017)

Abstrak— Prediksi kemenangan atlet adalah hal yang harus dilakukan oleh pelatih ketika memutuskan pemain  yang akan diturunkan dalam suatu pertandingan. Banyaknya faktor-faktor yang mempengaruhi kemenangan atlet membuat keputusan tersebut t...

DOAJ Open Access (DOAJ) DOI: 10.20473/jisebi.3.2.87-91

Context presentation and native conversation structure in large language model responses to escalating suicide risk: a controlled multimodel evaluation

Jueqiao Liu, Jueqiao Liu, Xiaoyi Chen, Jun Cai et al. • Frontiers in Psychiatry (2026)

BackgroundLarge language models are increasingly used for informal mental health support, yet their safety during escalating suicide-risk conversations may depend on how prior information is presented. Native multi-turn conversations and re...

DOAJ Open Access (DOAJ) DOI: 10.3389/fpsyt.2026.1962098

An Integral Model to Provide Reactive and Proactive Services in an Academic CSIRT Based on Business Intelligence

Walter Fuertes, Francisco Reyes, Paúl Valladares, Freddy Tapia et al. • Systems (2017)

Cyber-attacks have increased in severity and complexity. That requires, that the CERT/CSIRT research and develops new security tools. Therefore, our study focuses on the design of an integral model based on Business Intelligence (BI), which...

DOAJ Open Access (DOAJ) DOI: 10.3390/systems5040052

Reclaimed water in Taiwan: current status and future prospects

Hai-Hsuan Cheng, Wan-Sheng Yu, Shu-Chuang Tseng, Yi-Ju Wu et al. • Sustainable Environment Research (2023)

Abstract According to the Taiwan Water Resources Agency, Ministry of Economic Affairs, the average water demand shortage is 530.6 million m3 yr−1 during the period of 2011 to 2019, and the situation will worsen in the near future due to glo...

DOAJ Open Access (DOAJ) DOI: 10.1186/s42834-023-00177-8

Identificação e classificação de riscos na implantação da produção enxuta

Giuliano Almeida Marodin, Tarcísio Abreu Saurin, Carla Schwengber ten Caten • Production (2015)

Resumo O processo de implantação de sistemas de produção enxuta é complexo, demorado e sujeito a uma série de riscos. Este artigo tem como objetivo identificar e classificar os riscos presentes na implantação da produção enxuta (IPE). As qu...

DOAJ Open Access (DOAJ) DOI: 10.1590/0103-6513.033011

PENINGKATAN KUALITAS DENGAN PENDEKATAN SIX SIGMA DAN PERPEKTIF MBNQA SEBAGAI KRITERIA PRASYARAT BAKU MUTU PADA PT. TAMANACO

Aditya Apriawan Saputra • J@ti Undip: Jurnal Teknik Industri (2025)

Penelitian ini dilatarbelakangi oleh tingginya angka cacat produksi aluminium collapsible tube khususnya pada produk Kloderma 0.05% gel 5 gram Ø13,4 x 90 mm di PT. Tamanaco. Pada semester kedua tahun 2023, tingkat defect mencapai 8,81% (1.2...

DOAJ Open Access (DOAJ) DOI: 10.14710/jati.20.2.42-68

Tribological and flexural characterization of dissimilar AA2024-T3/AA6082-T6 friction stir welded joints

Paritosh Mishra, Brijesh Prasad, Sunil Chamoli, Ibrahim M. Alarifi • Journal of Materials Research and Technology (2026)

The escalating demand for lightweight, high-strength structures in the aerospace and automotive sectors necessitates robust joining technologies for dissimilar aluminium alloys. This study systematically investigates the effects of friction...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2026.08.256

FPGA-based multi-view stereo system with flexible measurement setup

Christina Junger, Richard Fütterer, Maik Rosenberger, Gunther Notni • Measurement: Sensors (2022)

In recent years, stereoscopic image processing algorithms have gained importance for a variety of applications. To capture larger measurement volumes, multiple stereo systems are combined into a multi-view stereo (MVS) system. To reduce the...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.measen.2022.100425

A short review on water management and reuse in textile industry – a sustainable approach

Nitin Thombre, Pritesh Patil, Ankita Yadav, Anand Patwardhan • Discover Water (2025)

Abstract The textile industry is one of the important and largest industry that consumes major chunk of the water in the world. This industry produces a large amount of wastewater during the processes such as sizing, de-sizing, scouring, bl...

DOAJ Open Access (DOAJ) DOI: 10.1007/s43832-025-00215-z

Rapid fabrication of CuMoO4 nanocomposites via electric field assisted pulsed-laser ablation in liquids for electrochemical hydrogen generation

Chaudry Sajed Saraj, Subhash C. Singh, Gopal Verma, Amged Alquliah et al. • Applied Surface Science Advances (2023)

Transition–metal-doped electrocatalysts are considered as low-cost alternatives of Pt and RuO2 electrocatalysts for large scale electrochemical generations of hydrogen and oxygen, respectively. Although, chemical synthesis, typically adopte...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.apsadv.2022.100358

Developing a Framework for Using Molecular Dynamics in Additive Manufacturing Process Modelling

Panagiotis Stavropoulos, Vasiliki Christina Panagiotopoulou • Modelling (2022)

Additive Manufacturing (AM), or else Smart Manufacturing, has been an intrinsic concept in Industry 4.0, offering flexibility and material efficiency. Certain limitations prevent AM from being used in the industrial setting extensively, des...

DOAJ Open Access (DOAJ) DOI: 10.3390/modelling3010013

User perspectives on AI explainability in aerospace manufacturing: a Card-Sorting study

Sofia Morandini, Federico Fraboni, Mark Hall, Santiago Quintana-Amate et al. • Frontiers in Organizational Psychology (2025)

The integration of AI technologies in aerospace manufacturing is significantly transforming critical operational processes, impacting decision-making, efficiency, and workflow optimization. Explainability in AI systems is essential to ensur...

DOAJ Open Access (DOAJ) DOI: 10.3389/forgp.2025.1538438

Nanofibers with a tunable wettability by electrospinning and physical crosslinking of poly(2-n-propyl-2-oxazoline)

Ella Schoolaert, Luisa Cossu, Jana Becelaere, Joachim F.R. Van Guyse et al. • Materials & Design (2020)

This work shows the design of highly porous membranes with tunable wettability based on poly(2-n-propyl-2-oxazoline) (PnPrOx) nanofibers. Wicking and advanced contact angle experiments demonstrate the high potential for applications requiri...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.matdes.2020.108747