Home »
Academic Articles & Research Papers
Showing 20 of 165 academic articles
Wei Wei, Qiang Li, Fangchao Xu, Xiaoyou Zhang et al. • Actuators
(2020)
This paper proposes an electromagnetic actuator that concurrently realizes two working functions of vibration suppression and energy regeneration. The actuator consists of four permanent magnetic rings, three soft iron rings, three coils, a...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/act9020042
Denis A Romanov • Materials Research Express
(2020)
This article describes increasing wear resistance of 5CrNiMo die steel by more than 5 times. This effect is achieved by creating TiC-Ti-Al and TiB _2 -Ti-Al coatings on the surface of 5CrNiMo die steel. The microhardness of the formed coati...
DOAJ
Open Access (DOAJ)
DOI: 10.1088/2053-1591/ab86f6
Qizhi Xie, Song Cui, Peilin Cheng, Qiang Liu • IEEE Access
(2023)
The inchworm in-pipe robot has the advantages of stable support, low walking resistance, and high flexibility. However, the gait motion of in-pipe robots relies on the precise coordination of three motors, which greatly increases the comple...
DOAJ
Open Access (DOAJ)
DOI: 10.1109/ACCESS.2023.3327269
Guoping Ding, Yixuan Zhang, Yong Zhu • Advanced Composites Letters
(2019)
The advantages of carbon fiber-reinforced plastic (CFRP) box girders include good bending resistance, lightweight and high strength. Therefore, they are widely used in aerospace, rail transit, and other fields. When the CFRP box girder is s...
DOAJ
Open Access (DOAJ)
DOI: 10.1177/2633366X19891171
Nnamdi C. Aronwora, Chibuzo Nwabufo Okwuosa, Jang-Wook Hur • IEEE Access
(2026)
The rate of capacity fade in a lithium-ion battery following a transition to a new discharge current is widely assumed to equal that of a battery that has always operated at the destination current, an implicit premise referred to here as l...
DOAJ
Open Access (DOAJ)
DOI: 10.1109/ACCESS.2026.3732470
Tanimu Kogi Ibrahim, Danjuma Saleh Yawas, Julius Thaddaeus, Bashar Danasabe et al. • Scientific Reports
(2024)
Abstract This study focuses on optimizing double stir casting process parameters to enhance the tensile strength of hybrid composites comprising aluminum alloy, brown pumice, and coal ash, intended for brake disc applications. Analytical te...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41598-024-67476-x
Donghwan Song, Adrian Matias Chung Baek, Jageon Koo, Moise Busogi et al. • Applied Sciences
(2020)
Over the past decades, additive manufacturing has rapidly advanced due to its advantages in enabling diverse material usage and complex design production. Nevertheless, the technology has limitations in terms of quality, as printed products...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/app10248951
Wuwei Feng, Hongya Chen, Qingping Zou, Di Wang et al. • Energies
(2024)
Wireless monitoring systems for the marine environment are important for rapidly growing subsea developments. The power supply of wireless sensor nodes within the monitoring systems, however, is a major challenge. This study proposes a nove...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/en17040876
Paritosh Mishra, Brijesh Prasad, Sunil Chamoli, Ibrahim M. Alarifi • Journal of Materials Research and Technology
(2026)
The escalating demand for lightweight, high-strength structures in the aerospace and automotive sectors necessitates robust joining technologies for dissimilar aluminium alloys. This study systematically investigates the effects of friction...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2026.08.256
Ziwei Wan, Chunlin Zhou, Zhaohui Lin, Huapeng Yan et al. • Sensors
(2023)
MultiCal is an affordable, high-precision measuring device designed for the on-site calibration of industrial robots. Its design features a long measuring rod with a spherical tip that is attached to the robot. By restricting the rod’s tip ...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/s23125717
Shangkai Liu, Kai Tong, Fengmin Chen, Senhua Zhang et al. • Buildings
(2026)
The reliability of high-strength bolted connections is critical to the safety of large-scale engineering structures. This study proposes a non-contact quantitative method for detecting bolt loosening based on the self-magnetic flux leakage ...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/buildings16030497
Tsonyo Slavov, Alexander Mitov, Jordan Kralev • Mathematics
(2025)
The article is devoted to designing novel multivariable robust μ-control of an open-circuit axial piston pump. In contrast with classical solutions of displacement volume control, in our case, the hydro-mechanical controller (by pressure, f...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/math13040643
Meng Yuan, Lei Li, Zhezhuang Xu • IEEE Access
(2022)
In biaxial contouring control applications, the inherent structural flexibility of machines can lead to position discrepancies between the manipulator and actuator, and thus deteriorate the manufacturing performance, especially when the con...
DOAJ
Open Access (DOAJ)
DOI: 10.1109/ACCESS.2022.3157868
Sameh Alsaqoor, Ahmad Alqatamin, Ali Alahmer, Zhang Nan et al. • International Journal of Thermofluids
(2023)
This study examines the impact of incorporating phase change material (PCM) in photovoltaic thermal (PVT) systems on their electrical and thermal performance. Although PVT systems have shown effectiveness in converting solar energy into bot...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.ijft.2023.100365
Jing Cui, Jiayu Ye, Zhongyi Chu • Shock and Vibration
(2018)
With the development of industrial production, drive systems are demanded for larger inertias of motors and load machines, whereas shafts should be lightweight. In this situation, it will excite mechanical vibrations in load side, which is ...
DOAJ
Open Access (DOAJ)
DOI: 10.1155/2018/1329876
Petros Petrounias, Panagiota P. Giannakopoulou, Aikaterini Rogkala, Maria Kalpogiannaki et al. • Applied Sciences
(2022)
This study was based on the reduction of the extraction of natural resources and, at the same time, was focused on the use of by-products and various wastes in construction applications by following the principles of circular economy. Steri...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/app12125861
HONG Zequn 1, SHI Rongjian 1, YUE Fengtian 1, HAN Lei 2 • Yantu gongcheng xuebao
(2023)
The temperature field is the basis for assessing the mechanical state and water-sealing performance of the frozen wall, which is an important research direction of the artificial freezing theory. For the freezing pipes in the form of a clos...
DOAJ
Open Access (DOAJ)
DOI: 10.11779/CJGE20220700
Yudong Li, Tianyu Zhang, Yujun Zhang • Journal of Applied Mathematics
(2014)
This paper deals with the control problem of the chaotic system subject to disturbance. The sliding mode surface is designed by singular system approach, and sufficient condition for convergence is given. Then, the adaptive sliding mode con...
DOAJ
Open Access (DOAJ)
DOI: 10.1155/2014/580105
José Salvado, Maria do Rosário Calado, António Espírito Santo, Anna Guerman • Modelling and Simulation in Engineering
(2017)
This paper addresses the problem of vibrations produced by switched reluctance actuators, focusing on the linear configuration of this type of machines, aiming at its characterization regarding the structural vibrations. The complexity of t...
DOAJ
Open Access (DOAJ)
DOI: 10.1155/2017/3258376
Joost C. F. de Winter, Dimitra Dodou, Yke Bauke Eisma • Computers
(2024)
The processes underlying human cognition are often divided into System 1, which involves fast, intuitive thinking, and System 2, which involves slow, deliberate reasoning. Previously, large language models were criticized for lacking the de...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/computers13110278