Reset
Showing 20 of 2,701 academic articles

Compression and Tensile Testing of L-PBF Ti-6Al-4V Lattice Structures with Biomimetic Porosities and Strut Geometries for Orthopedic Implants

Dimitri P. Papazoglou, Amy T. Neidhard-Doll, Margaret F. Pinnell, Dathan S. Erdahl et al. • Metals (2024)

In an effort to contribute to the ongoing development of ASTM standards for additively manufactured metal lattice specimens, particularly within the field of medicine, the compressive and tensile mechanical properties of biomimetic lattice ...

DOAJ Open Access (DOAJ) DOI: 10.3390/met14020232

Sensitivity Analysis and Uncertainty Quantification of Nanoparticle Deposition from Tongue Morphological Variations

Tiancheng Yang, Xiuhua Si, Jinxiang Xi • Life (2024)

The human tongue has highly variable morphology. Its role in regulating respiratory flows and deposition of inhaled aerosols remains unclear. The objective of this study was to quantify the uncertainty of nanoparticle deposition from the va...

DOAJ Open Access (DOAJ) DOI: 10.3390/life14030406

An Adaptive JPEG Double Compression Steganographic Scheme Based on Irregular DCT Coefficients Distribution

Ju Jia, Zhaoxia Xiang, Lina Wang, Yan Xu • IEEE Access (2019)

Steganography is to embed secret information into digital media and minimize the distortion caused by data embedding. The JPEG is a widely used image compression format, and many JPEG images transmitted on the network are double compressed....

DOAJ Open Access (DOAJ) DOI: 10.1109/ACCESS.2019.2926226

The Numerical Solution of Fractional Parabolic Partial Integro-Differential Eequations by Gaussian and Inverse Multiquadric Radial Basis Functions

F. S. Aghaei Maybodi, M. H. Heydari, F. M. Maalek Ghaeini, M. H. Akrami • پژوهش‌های ریاضی (2021)

Introduction Many mathematical formulations of physical phenomena contain integro-differential equations. These equations arise in fluid dynamics, biological models, chemical kinetics, ecology, control theory of financial mathematics, aeros...

DOAJ Open Access (DOAJ)

Ground calibration tests of the laser altimeter (LIDAR) for MMX mission

Hiroki Senshu, Takahide Mizuno, Toru Nakura, Ryo Suetsugu et al. • Progress in Earth and Planetary Science (2025)

Abstract The spacecraft for the Japanese Martian Moon eXploration mission is equipped with a LIDAR laser altimeter. The slant range continuously measured by the LIDAR is used for the correction of the local topography and the orbit and atti...

DOAJ Open Access (DOAJ) DOI: 10.1186/s40645-025-00705-7

Research Progresses of Flash Evaporation in Aerospace Applications

Wei Ma, Siping Zhai, Ping Zhang, Yaoqi Xian et al. • International Journal of Aerospace Engineering (2018)

Liquid is overheated and evaporated quickly when it enters into the environment with lower saturation pressure than that corresponding to its initial temperature. This phenomenon is known as the flash evaporation. A natural low-pressure env...

DOAJ Open Access (DOAJ) DOI: 10.1155/2018/3686802

Generating Daily High-Resolution Regional XCO<sub>2</sub> by Deep Neural Network and Multi-Source Data

Wenjie Tian, Lili Zhang, Tao Yu, Dong Yao et al. • Atmosphere (2024)

CO2 is one of the primary greenhouse gases impacting global climate change, making it crucial to understand the spatiotemporal variations of CO2. Currently, commonly used satellites serve as the primary means of CO2 observation, but they of...

DOAJ Open Access (DOAJ) DOI: 10.3390/atmos15080985

Attitude Control of a Vehicle with Active Airfoil and Suspension Systems Using Integral Action for Body Angle and Tire Deflection

Syed Babar Abbas, Iljoong Youn • Actuators (2026)

This paper presents a novel approach to design an attitude motion control strategy of a vehicle to mitigate lateral or longitudinal inertial forces acting on the passenger during cornering, braking, and acceleration maneuvers. The collabora...

DOAJ Open Access (DOAJ) DOI: 10.3390/act15060317

Application of Microwave Polarimetry to the Characterization of Fiber Misalignment in Composites

Matthew Dvorsky, Daniela Munalli, Mohammad Tayeb Al Qaseer, Reza Zoughi • IEEE Open Journal of Instrumentation and Measurement (2022)

In this paper synthetic aperture radar (SAR) polarimetry techniques are applied to detect and characterize fiber misalignment in both carbon fiber sheets and glass fiber reinforced polymer (GFRP) composites. The principle behind SAR polarim...

DOAJ Open Access (DOAJ) DOI: 10.1109/OJIM.2022.3184347

Research progress in high thermal conductivity of silicon carbide matrix composites reinforced with fibers

CHEN Qiang, LI Shun, ZHU Li'an, BAI Shuxin et al. • Cailiao gongcheng (2023)

As one kind of advanced high temperature structural and functional materials, it is necessary for fiber reinforced silicon carbide matrix composites (SiC CMCs) in the field of thermal management (TM) to combine the efficient heat transfer a...

DOAJ Open Access (DOAJ) DOI: 10.11868/j.issn.1001-4381.2023.000079

Concept of Sporadic E Monitoring Using Space-Based Low Power Multiple Beacon-Systems

Jurgen Vanhamel, Marc Berwaerts, Stefano Speretta, Sevket Uludag • Atmosphere (2024)

Current monitoring systems to detect sporadic E use ground-based setups, ionosondes, and the network of GNSS satellites in order to assess the phenomenon of sporadic E. This paper aims to monitor sporadic E using a miniature space-based pla...

DOAJ Open Access (DOAJ) DOI: 10.3390/atmos15111306

Investigation of Defect Effects on Adhesively Bonded Joint Strength Using Cohesive Zone Modeling

Majid Jamal-Omidi, Mohammad Reza Mohammadi Suki • Journal of Mechanical Engineering (2018)

In this paper, effects of the defect in an adhesively bonded joint have been investigated using cohesive zone modeling. Consequently, a 3D finite element model of a single lap-joint is constructed and validated with experiments. Strength pr...

DOAJ Open Access (DOAJ) DOI: 10.2478/scjme-2018-0023

Study on Flight Performance of Propeller-Driven UAV

Rui-lin Liu, Zhong-jie Zhang, Yu-fei Jiao, Chun-hao Yang et al. • International Journal of Aerospace Engineering (2019)

The engine performance test at altitudes of 0-7000 m was carried out on the high-performance test bench of the Unmanned Aerial Vehicle (UAV) piston engine. The flight performance of UAV was studied, including propeller thrust characteristic...

DOAJ Open Access (DOAJ) DOI: 10.1155/2019/6282451

A Novel Inertial-Aided Star Pattern Matching Method for Distributed Multiple FoVs

Rong Wang, Yuxuan Cao, Jianye Liu, Zhi Xiong • International Journal of Aerospace Engineering (2020)

An aerospace vehicle in high-speed flight involves distributed multiple fields of view (FoVs) of a star sensor, and the maneuvering of the vehicle requires inertial-aided star pattern matching. Accordingly, an inertial-aided star pattern ma...

DOAJ Open Access (DOAJ) DOI: 10.1155/2020/2676210

Numerical Simulation of an Intramedullary Elastic Nail: Expansion Phase and Load-Bearing Behavior

Giulia Pascoletti, Filippo Cianetti, Giovanni Putame, Mara Terzini et al. • Frontiers in Bioengineering and Biotechnology (2018)

The Marchetti-Vicenzi's nail is an intramedullary device where six curved nails are kept straight by a closing ring in order to allow their insertion into the medullary canal of a long bone; in a following step, these nails stabilize the fr...

DOAJ Open Access (DOAJ) DOI: 10.3389/fbioe.2018.00174

Two-dimensional metallic tantalum ditelluride with an intrinsic basal-plane activity for oxygen reduction: A microkinetic modeling study

Yu Wang, Kun Zhou • Green Energy & Environment (2022)

Two-dimensional (2D) materials have exhibited great potential for replacing costly Pt for oxygen reduction reaction (ORR) because of their distinctive structural features and high pre-site activity. However, their performance is generally h...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.gee.2020.11.003

Urban Sprawl and Changes in Land-Use Efficiency in the Beijing–Tianjin–Hebei Region, China from 2000 to 2020: A Spatiotemporal Analysis Using Earth Observation Data

Meiling Zhou, Linlin Lu, Huadong Guo, Qihao Weng et al. • Remote Sensing (2021)

Sustainable development in urban areas is at the core of the implementation of the UN 2030 Agenda and the Sustainable Development Goals (SDG). Analysis of SDG indicator 11.3.1—Land-use efficiency based on functional urban boundaries—provide...

DOAJ Open Access (DOAJ) DOI: 10.3390/rs13152850