Reset
Showing 20 of 9,867 academic articles

The spread and transformation of Ikeda Saburo's reports: The Relationship Between Cartoon and Wartime Media in the Spread and Transformation of Reports

Hiroshi KIYOMATSU • Gwagyeong Ilboneo Munhak Yeongu (2018)

Saburo Ikeda was a cartoonist who played an active role in pre-war Japan. He preferred a manga manbun style, which combines cartoon with prose, and his many works reference both financial circles and the literary world. In 1939, he travelle...

DOAJ Open Access (DOAJ) DOI: 10.22628/bcjjl.2018.6.1.165

A Systematic Meta-Synthesis of Factors Influencing University Student Happiness

Seyedkamal Vaezi, Mohammad Pedrami • پژوهشنامه روانشناسی مثبت (2025)

This study aimed to systematically synthesize and prioritize the main factors influencing university students’ happiness and well-being. Employing a rigorous qualitative methodology based on interpretive meta-synthesis, the research compreh...

DOAJ Open Access (DOAJ) DOI: 10.22108/ppls.2026.142544.2560

Analyzing the Spatiotemporal Patterns in Green Spaces for Urban Studies Using Location-Based Social Media Data

Hidayat Ullah, Wanggen Wan, Saqib Ali Haidery, Naimat Ullah Khan et al. • ISPRS International Journal of Geo-Information (2019)

Green parks are vital public spaces and play a major role in urban living and well-being. Research on the attractiveness of green parks often relies on traditional techniques, such as questionnaires and in-situ surveys, but these methods a...

DOAJ Open Access (DOAJ) DOI: 10.3390/ijgi8110506

The Impact of Residents’ Daily Internet Activities on the Spatial Distribution of Online Fraud: An Analysis Based on Mobile Phone Application Usage

Guangwen Song, Jiajun Liang, Linlin Wu, Lin Liu et al. • ISPRS International Journal of Geo-Information (2025)

In recent years, there has been a sharp increase in the number of online fraud cases. However, research on crime geography has paid little attention to online crimes, especially to the influencing factors behind their spatial distributions....

DOAJ Open Access (DOAJ) DOI: 10.3390/ijgi14040151

Movement behaviors and their association with depressive symptoms in Brazilian adolescents: A cross-sectional study

Bruno Gonçalves Galdino da Costa, Jean-Philippe Chaput, Marcus Vinicius Veber Lopes, Luis Eduardo Argenta Malheiros et al. • Journal of Sport and Health Science (2022)

Background: Physical activity, sleep, and sedentary behaviors compose 24-h movement behaviors and have been independently associated with depressive symptoms. However, it is not clear whether it is the movement behavior itself or other cont...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jshs.2020.08.003

Evaluation of polybenzimidazole-based polymers for the removal of uranium, thorium and palladium from aqueous medium

V. Vijaya Kumar, C. Ramesh Kumar, A. Suresh, S. Jayalakshmi et al. • Royal Society Open Science (2018)

Four types of polybenzimidazole (PBI)-based polymers (m-PBI, p-PBI, pyridine-based m-PBI and alkylated m-PBI) have been prepared and characterized. Extraction behaviour of heavy metal ions, viz. U(VI), Th(IV) and Pd(II), with these polymers...

DOAJ Open Access (DOAJ) DOI: 10.1098/rsos.171701

A cluster randomised school-based lifestyle intervention programme for the prevention of childhood obesity and related early cardiovascular disease (JuvenTUM 3)

Haller Bernhard, Lammel Christoph, Hanssen Henner, Siegrist Monika et al. • BMC Public Health (2011)

Abstract Background Childhood obesity is not only associated with adult obesity but also with increased risk of adult onset of type 2 diabetes and subsequent coronary heart disease. The potential effects of school-based health intervention ...

DOAJ Open Access (DOAJ) DOI: 10.1186/1471-2458-11-258

Relationship between atherosclerosis and occlusal support of natural teeth with mediating effect of atheroprotective nutrients: From the SONIC study.

Sayaka Tada, Kazunori Ikebe, Kei Kamide, Yasuyuki Gondo et al. • PLoS ONE (2017)

Whereas most of studies investigating relationship between oral health and atherosclerosis have focused on periodontitis, very few of them were examined about occlusal status of natural teeth which possibly influence dietary habit. The prim...

DOAJ Open Access (DOAJ) DOI: 10.1371/journal.pone.0182563

Knowledge, attitude, and practice patterns of Indian ophthalmologists regarding medicolegal issues

Deepanshu Agrawal, Aarti Heda, Sayantan Ghosh, Sonal Kalia et al. • Indian Journal of Ophthalmology (2023)

Purpose: To assess the knowledge, attitude, and practice patterns (KAPP) of Indian ophthalmologists regarding medicolegal issues using an initial survey. Methods: An online form was circulated among Indian ophthalmologists of all ages over ...

DOAJ Open Access (DOAJ) DOI: 10.4103/IJO.IJO_1084_23

Evaluating Load-Conditional Convergence in Lithium-Ion Battery Degradation: A Matched-Group Statistical Framework

Nnamdi C. Aronwora, Chibuzo Nwabufo Okwuosa, Jang-Wook Hur • IEEE Access (2026)

The rate of capacity fade in a lithium-ion battery following a transition to a new discharge current is widely assumed to equal that of a battery that has always operated at the destination current, an implicit premise referred to here as l...

DOAJ Open Access (DOAJ) DOI: 10.1109/ACCESS.2026.3732470

Conjugate mixed convection heat transfer with internal heat generation in a lid-driven enclosure with spinning solid cylinder

Md. Jisan Mahmud, Ahmed Imtiaz Rais, Md. Rakib Hossain, Sumon Saha • Heliyon (2022)

The current study investigates conjugate mixed convection heat transmission with internal heat generation in a square enclosure driven by a sliding lid and a solid cylinder with a heat-conducting surface at its center. The enclosure has a s...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.heliyon.2022.e11968

A Dynamic Discriminative Canonical Correlation Analysis via Adaptive Weight Scheme

Shuzhi Su, Penglian Gao, Yanmin Zhu, Xingzhu Liang et al. • IEEE Access (2021)

In multi-view learning, massive literature is devoted to exploring the intrinsic structure between cross-views. It is well known that canonical correlation analysis (CCA) is a conventional multi-view learning method, which considers the cor...

DOAJ Open Access (DOAJ) DOI: 10.1109/ACCESS.2021.3118023

A study on high-shear and low-pressure grinding with body-armour-like abrasive tool (BAAT) for Inconel 718 superalloys

Yebing Tian, Chengjin Tian, Sohini Chowdhury, Jinguo Han et al. • Journal of Materials Research and Technology (2023)

A novel body-armour-like abrasive tool (BAAT) was developed for the high-shear and low-pressure grinding of super alloys with an aim to reduce the ratio of normal force to tangential force. A composite process model was developed based on f...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2023.04.205

An object-oriented design method to implement the mechatronic system control by using hybrid automata and real-time UML

Vu Duy Quang, Ngo Van Hien • Vietnam Journal of Mechanics (2011)

In this paper, we present a method, which is based on hybrid automata and Real-Time Unified Modeling Language (UML) to analyze and design the control parts of mechatronic systems with input or output events and signals in order to effective...

DOAJ Open Access (DOAJ) DOI: 10.15625/0866-7136/33/3/211

Análisis de interacciones cliente-sistema en procesos de comercio gastronómico en la ciudad de Pamplona empleando una ICC

Luz Angela Moreno Cueva, Cesar Augusto Peña Cortes, Jarol Derley Ramon Valencia • Prospectiva (2026)

En este artículo se presenta un estudio piloto para la selección de un método en la toma de pedidos de un restaurante de comidas rápidas en la ciudad de Pamplona. Se realizó un diseño experimental para comparar los indicadores de desempeño ...

DOAJ Open Access (DOAJ) DOI: 10.15665/rvgt9394

Forecasting Warping Deformation Using Multivariate Thermal Time Series and K-Nearest Neighbors in Fused Deposition Modeling

Donghwan Song, Adrian Matias Chung Baek, Jageon Koo, Moise Busogi et al. • Applied Sciences (2020)

Over the past decades, additive manufacturing has rapidly advanced due to its advantages in enabling diverse material usage and complex design production. Nevertheless, the technology has limitations in terms of quality, as printed products...

DOAJ Open Access (DOAJ) DOI: 10.3390/app10248951