Reset
Showing 20 of 553 academic articles

Liquid lithium wettability studies on novel zirconium-alloyed porous tungsten

C. López Pérez, T. Marchhart, A. Marin, M. Nieto-Perez et al. • Nuclear Materials and Energy (2023)

Liquid lithium wettability has been investigated on novel zirconium-alloyed porous tungsten fabricated by the place-holder spark plasma sintering technique. This paper investigates the wetting properties of liquid lithium on the substrates ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.nme.2023.101525

The Microstructures and Electrical Resistivity of (Al, Cr, Ti)FeCoNiOx High-Entropy Alloy Oxide Thin Films

Chun-Huei Tsau, Zhang-Yan Hwang, Swe-Kai Chen • Advances in Materials Science and Engineering (2015)

The (Al, Cr, Ti)FeCoNi alloy thin films were deposited by PVD and using the equimolar targets with same compositions from the concept of high-entropy alloys. The thin films became metal oxide films after annealing at vacuum furnace for a pe...

DOAJ Open Access (DOAJ) DOI: 10.1155/2015/353140

Effect of Surface Roughness on Adhesive Instabilities for the Elastic Layer

Junki Joe, M. D. Thouless, M. D. Thouless, J. R. Barber • Frontiers in Mechanical Engineering (2020)

If an incompressible elastic layer bonded to a rigid plane is placed close to a second rigid plane, adhesive interactions between the surfaces can cause elastic instabilities. These lead to spatially non-uniform traction and gap distributio...

DOAJ Open Access (DOAJ) DOI: 10.3389/fmech.2020.00031

Materials Science

D.R. Powis, T. Follerås, Sheila A. Merson, A.D. Wilson • Journal of Dental Research (1982)

A study has been made on improving the adhesion of a glass ionomer cement by the chemical treatment of dentin and enamel surfaces. The most effective surface conditioners were high molecular weight substances containing a multiplicity of fu...

OPENALEX DOI: https://doi.org/10.1177/00220345820610120801

Materials Science

(2025)

Materials science has always occupied an extremely high position in the human development process. As we explore the oceans of stars, various industries have put forward more stringent requirements for the performance of materials, forcing ...

OPENALEX DOI: https://doi.org/10.5772/intechopen.1002828

OPTIMIZATION OF HOT AIR SOLDER LEVELING (HASL) MACHINE FOR A ROBUST SURFACE FINISH IN SOLDERING APPLICATIONS

Mohd Izrul Izwan RAMLI, Siti Farahnabilah MUHD AMLI, Norainiza SAUD, Dewi Suriyani CHE HALIN et al. • European Journal of Materials Science and Engineering (2023)

Hot Air Solder Leveling (HASL) is one of the most commonly used surface finishes in the industry. HASL is also one of the least expensive types of PCB surface finishes available. This study aims to examine the influence on the solder joint ...

DOAJ Open Access (DOAJ) DOI: 10.36868/ejmse.2023.08.01.030

Preparation and electromagnetic absorbing properties of TiC/Ni powders

ZHANG Sen, LIU Yi, SU Xiaolei, LI Yunyu et al. • Xi'an Gongcheng Daxue xuebao (2022)

In order to improve the microwave absorption performance of TiC powder, TiC/Ni composite powder was prepared by coating nickel particles with mass fraction of 10%, 20% and 30% on the surface of TiC by typical coarsening and sensitizing elec...

DOAJ Open Access (DOAJ) DOI: 10.13338/j.issn.1674-649x.2022.01.005

Rarefied Reactive Gas Flows over Simple and Complex Geometries Using an Open-Source DSMC Solver

Rodrigo Cassineli Palharini, João Luiz F. Azevedo, Diego Vera Sepúlveda • Aerospace (2025)

During atmospheric reentry, a significant number of chemical reactions are produced inside the high-temperature shock wave formed upstream of the spacecraft. Chemical reactions can significantly alter the flowfield structure surrounding the...

DOAJ Open Access (DOAJ) DOI: 10.3390/aerospace12080651

Cryo-CMOS for quantum computing

Edoardo Charbon A, Fabio Sebastiano, Andrei Vladimirescu, Harald Homulle et al. • Technical digest - International Electron Devices Meeting/Technical digest (2016)

Cryogenic CMOS, or cryo-CMOS circuits and systems, are emerging in VLSI design for many applications, in primis quantum computing. Fault-tolerant quantum bits (qubits) in surface code configurations, one of the most accepted implementations...

OPENALEX Open Access DOI: https://doi.org/10.1109/iedm.2016.7838410

Graphene Quantum Dots Modified with Metformin/Co(II) as Efficient Oxidation Catalyst

Saeid Nejati, Sajjad Keshipour, Mozhdeh Seyyedhamzeh • Iranian Journal of Chemistry & Chemical Engineering (2022)

While one of the valuable approaches to obtaining a heterogeneous catalyst is supporting them on a high surface area supports, the strategy mainly suffers from the low number of chelating agents on most of the supports to grip the metal cat...

DOAJ Open Access (DOAJ) DOI: 10.30492/ijcce.2021.530898.4752

Nitrogen-Doped Mesoporous Carbon Microspheres by Spray Drying-Vapor Deposition for High-Performance Supercapacitor

Xiaoran Sun, Xiaoran Sun, Yueqi Kong, Yang Liu et al. • Frontiers in Chemistry (2020)

Nitrogen-doped mesoporous carbon microspheres have been successfully synthesized via a spray drying-vapor deposition method for the first time, using commercial Ludox silica nanoparticles as hard templates. Compared to freeze-drying and air...

DOAJ Open Access (DOAJ) DOI: 10.3389/fchem.2020.592904

Encyclopedia of nanotechnology

Bharat Bhushan • Choice Reviews Online (2013)

The Encyclopedia of Nanotechnology provides a comprehensive and multi-disciplinary reference to the many fields relevant to the general field of nanotechnology. It aims to be a comprehensive and genuinely international reference work and wi...

OPENALEX DOI: https://doi.org/10.5860/choice.50-3014

Nanotechnology for the biologist

Scott E. McNeil • Journal of Leukocyte Biology (2005)

Nanotechnology refers to research and technology development at the atomic, molecular, and macromolecular scale, leading to the controlled manipulation and study of structures and devices with length scales in the 1- to 100-nanometers range...

OPENALEX DOI: https://doi.org/10.1189/jlb.0205074

Nanotechnology and medicine

Dwaine F. Emerich, Christopher G. Thanos • Expert Opinion on Biological Therapy (2003)

Nanotechnology, or systems/device manufacture at the molecular level, is a multidisciplinary scientific field undergoing explosive development. The genesis of nanotechnology can be traced to the promise of revolutionary advances across medi...

OPENALEX DOI: https://doi.org/10.1517/14712598.3.4.655

Survival of pathogens on soybean debris under no-tillage and conventional tillage systems Sobrevivência de patógenos em restos de cultura de soja mantidos em sistema de semeadura direta e convencional

Álvaro Manuel Rodrigues Almeida, Odilon Ferreira Saraiva, José Renato Bouças Farias, Celso Almeida Gaudêncio et al. • Pesquisa Agropecuária Brasileira (2001)

A study was conducted in the subtropical area of Southern Brazil to determine the survival of pathogens in soybean residues under conventional and no-tillage cultivation systems from March to September of 1998 and 1999. The pathogens most f...

DOAJ Open Access (DOAJ) DOI: 10.1590/S0100-204X2001001000003

Three-Dimensional Physical and Optical Characteristics of Aerosols over Central China from Long-Term CALIPSO and HYSPLIT Data

Xin Lu, Feiyue Mao, Zengxin Pan, Wei Gong et al. • Remote Sensing (2018)

Aerosols greatly influence global and regional atmospheric systems, and human life. However, a comprehensive understanding of the source regions and three-dimensional (3D) characteristics of aerosol transport over central China is yet to be...

DOAJ Open Access (DOAJ) DOI: 10.3390/rs10020314