Reset
Showing 20 of 65 academic articles

Investigation of the Friction Performance of G3000 (Variant), GG20, and GG15 (High Carbon) Cast Brake Discs Using the SAE J2522 Procedure

Talha İkbal Çığır, Melih Hakan Samur, Mevlüt Yasin Igdeli • International Journal of Automotive Science and Technology (2025)

This study compares the friction performance of three commonly used cast brake disc materials in the automotive industry: the G3000 variant, GG20, and GG15 (high carbon content). Samples were tested on an inertia dynamometer following the S...

DOAJ Open Access (DOAJ) DOI: 10.30939/ijastech..1811564

Research progress in high thermal conductivity of silicon carbide matrix composites reinforced with fibers

CHEN Qiang, LI Shun, ZHU Li'an, BAI Shuxin et al. • Cailiao gongcheng (2023)

As one kind of advanced high temperature structural and functional materials, it is necessary for fiber reinforced silicon carbide matrix composites (SiC CMCs) in the field of thermal management (TM) to combine the efficient heat transfer a...

DOAJ Open Access (DOAJ) DOI: 10.11868/j.issn.1001-4381.2023.000079

Non-equilibrium finite temperature dynamics of magnetic quantum systems: applications to spin-polarized scanning tunneling microscopy

K Them, T Stapelfeldt, E Y Vedmedenko, R Wiesendanger • New Journal of Physics (2013)

We calculated the real-time non-equilibrium dynamics of quantum spin systems at finite temperatures. The mathematical framework originates from the C *-approach to quantum statistical mechanics and was applied to the samples investigated by...

DOAJ Open Access (DOAJ) DOI: 10.1088/1367-2630/15/1/013009

Synthesize and characterization of hybrid aluminium alloy (AA6063) metal matrix composite (HAMMC) with corn cob ash and alumina (Al2O3) reinforcements

Ayenew Amare, Mezigebu Belay, Zewudu Wondimagegn • Journal of Materials Science: Materials in Engineering (2026)

Abstract The use of aluminium matrix composites (AMCs) in advanced engineering applications has increased due to their improved mechanical properties, such as hardness, ultimate tensile strength, toughness, wear, and corrosion resistance. A...

DOAJ Open Access (DOAJ) DOI: 10.1186/s40712-026-00421-0

Computational Adaptive Optics for HAR Hybrid Trench Array Topography Measurement by Utilizing Coherence Scanning Interferometry

Wenyou Qiao, Zhishan Gao, Qun Yuan, Lu Chen et al. • Sensors (2025)

High aspect ratio (HAR) sample-induced aberrations seriously affect the topography measurement for the bottom of the microstructure by coherence scanning interferometry (CSI). Previous research proposed an aberration compensating method usi...

DOAJ Open Access (DOAJ) DOI: 10.3390/s25134085

Experimental and Modelling Research on the Effect of Prior Ferrite on Bainitic Transformation in Medium-Carbon Bainitic Steel

Xinpan Yu, Wei Liu, Kang He, Tengfei Wang et al. • Crystals (2024)

In this study, we investigate the impact of prior ferrite on the bainite transformation kinetics and microstructure of medium-carbon steel interrupted by an intercritical annealing (IAA) process. It was found that the incubation time and co...

DOAJ Open Access (DOAJ) DOI: 10.3390/cryst14060487

High‐performance optical noncontact controlling system based on broadband PtTex/Si heterojunction photodetectors for human–machine interaction

Zhexin Li, Wenhao Ran, Yongxu Yan, Linlin Li et al. • InfoMat (2022)

Abstract Noncontact interaction systems have attracted considerable research attention in recent years because of convenient operation, sterility, and injury prevention. However, the insufficient sensing distance and weak robustness of nonc...

DOAJ Open Access (DOAJ) DOI: 10.1002/inf2.12261

Critical thickness of GaN film in controllable stress-induced self-separation for preparing native GaN substrates

Mengda Li, Yutian Cheng, Tongjun Yu, Jiejun Wu et al. • Materials & Design (2019)

Stress-induced self-separation is one of the most efficient process for preparing native GaN substrate. The control of GaN film thickness is the key point for GaN film separating from substrate completely. Considering the bowing of bilayer,...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.matdes.2019.107985

Formation of surfaces oxide vacancies in porous ZnCo2O4 nanoflowers for enhanced energy storage performance

Deyang Zhang, Binhe Feng, Wenbo Guo, Jinbing Cheng et al. • Discover Nano (2025)

Abstract A cost-effective and large-scale method for synthesizing ZnCo2O4 nanoflowers with surface oxygen vacancies as electrode materials for supercapacitors is presented. The existence of oxygen vacancies on the surface of the ZnCo2O4 nan...

DOAJ Open Access (DOAJ) DOI: 10.1186/s11671-025-04347-y

Effect of Aluminum on Microstructure and High-Temperature Oxidation Resistance of Austenitic Heat-Resistant Steel

Chang Gu, Ruizhuo Liu, Chengduo Wang, Yufu Sun et al. • Metals (2020)

The ZG40Cr20Ni20Alx (x = 0, 1.76, 3.45, and 5.34) heat-resistant steel has been newly developed on the basis of HK40 steel for aggressive oxidizing environments. The results reveal that the Al greatly enhances the oxidation resistance of ZG...

DOAJ Open Access (DOAJ) DOI: 10.3390/met10020176

Optimization of Metal Inert Gas Welding Process during Joining of Structural Steels- An Overview

Misra Ravindra Kumar, Porwal Rajesh Kumar • E3S Web of Conferences (2020)

Metal Inert Gas welding is a fast, reliable and cost effective technique for joining of different ferrous materials and steels used in the construction of large structures like Fe410WA, IS2062, SS304, AISI1040 and AISI316 etc. To obtain bet...

DOAJ Open Access (DOAJ) DOI: 10.1051/e3sconf/202018401028

Impact of Ultra-High Pressure Homogenization on the Structural Properties of Egg Yolk Granule

Romuald Gaillard, Alice Marciniak, Guillaume Brisson, Véronique Perreault et al. • Foods (2022)

Ultra-high pressure homogenization (UHPH) is a promising method for destabilizing and potentially improving the techno-functionality of the egg yolk granule. This study’s objectives were to determine the impact of pressure level (50, 175 an...

DOAJ Open Access (DOAJ) DOI: 10.3390/foods11040512

Antimicrobial topical polymeric films loaded with Acetyl-11-keto-β-boswellic acid (AKBA), boswellic acid and silver nanoparticles: Optimization, characterization, and biological activity

Muhammad Jawad, Saurabh Bhatia, Ahmed Al-Harrasi, Sana Ullah et al. • Heliyon (2024)

The study examined the antimicrobial and antioxidant potential of pure Acetyl-11-keto-β-boswellic acid (AKBA), boswellic acid (70%) and AKBA loaded nanoparticles as topical polymeric films. The optimized concentration (0.05 % w/v) of pure A...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.heliyon.2024.e31671

Manufacturing of a New Generations from the Recycled AL Scrape Reinforced with AL2O3 - GNS Composite Powder by Vortex Technique for Automotive Spare Parts

Fathei Nouh, Omayma El kady, Sabry abdel aziz • International Journal of Industry and Sustainable Development (2024)

This research addresses the urgent challenges facing the materials and metallurgical industries, driving manufacturers to seek innovative solutions for material recycling. Aluminum scrape in used to manufacture a composite material with a h...

DOAJ Open Access (DOAJ) DOI: 10.21608/ijisd.2024.302067.1074

Independent Acidic pH Reactivity of Non-Iron-Fenton Reaction Catalyzed by Copper-Based Nanoparticles for Fluorescent Dye Oxidation

Zakia H. Alhashem, Hasna Abdullah Alali, Shehab A. Mansour, Maha A. Tony et al. • Inorganics (2025)

The process of hydrogen peroxide decomposition, facilitated by copper oxide nanoparticles, produces reactive oxidants that possess the ability to oxidize multiple pollutants. CuO/Cu2O hybrid nanoparticles were successfully synthesized throu...

DOAJ Open Access (DOAJ) DOI: 10.3390/inorganics13030097

The Microstructures and Electrical Resistivity of (Al, Cr, Ti)FeCoNiOx High-Entropy Alloy Oxide Thin Films

Chun-Huei Tsau, Zhang-Yan Hwang, Swe-Kai Chen • Advances in Materials Science and Engineering (2015)

The (Al, Cr, Ti)FeCoNi alloy thin films were deposited by PVD and using the equimolar targets with same compositions from the concept of high-entropy alloys. The thin films became metal oxide films after annealing at vacuum furnace for a pe...

DOAJ Open Access (DOAJ) DOI: 10.1155/2015/353140

Achieving high thermal conductivity of Al–50Si alloy through heat treatment and its microstructural evolution

Chao Ding, Huali Hao, Rui Ma, Changqing Ye et al. • Journal of Materials Research and Technology (2023)

Al–50Si alloys were prepared by powder extrusion and characterized for electronic packaging. The optimization of powder size, extrusion temperature, and heat treatment parameters was performed to enhance the microstructure and thermo-physic...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2023.11.038

OPTIMIZATION OF HOT AIR SOLDER LEVELING (HASL) MACHINE FOR A ROBUST SURFACE FINISH IN SOLDERING APPLICATIONS

Mohd Izrul Izwan RAMLI, Siti Farahnabilah MUHD AMLI, Norainiza SAUD, Dewi Suriyani CHE HALIN et al. • European Journal of Materials Science and Engineering (2023)

Hot Air Solder Leveling (HASL) is one of the most commonly used surface finishes in the industry. HASL is also one of the least expensive types of PCB surface finishes available. This study aims to examine the influence on the solder joint ...

DOAJ Open Access (DOAJ) DOI: 10.36868/ejmse.2023.08.01.030