Reset
Showing 20 of 500 academic articles

Tailoring structural properties of carbon via implanting optimal co nanoparticles in n‐rich carbon cages toward high‐efficiency oxygen electrocatalysis for rechargeable zn‐air batteries

Jie Yu, Yawen Dai, Zhenbao Zhang, Tong Liu et al. • Carbon Energy (2022)

Abstract Rational construction of carbon‐based materials with high‐efficiency bifunctionality and low cost as the substitute of precious metal catalyst shows a highly practical value for rechargeable Zn‐air batteries (ZABs) yet it still rem...

DOAJ Open Access (DOAJ) DOI: 10.1002/cey2.171

Independent Acidic pH Reactivity of Non-Iron-Fenton Reaction Catalyzed by Copper-Based Nanoparticles for Fluorescent Dye Oxidation

Zakia H. Alhashem, Hasna Abdullah Alali, Shehab A. Mansour, Maha A. Tony et al. • Inorganics (2025)

The process of hydrogen peroxide decomposition, facilitated by copper oxide nanoparticles, produces reactive oxidants that possess the ability to oxidize multiple pollutants. CuO/Cu2O hybrid nanoparticles were successfully synthesized throu...

DOAJ Open Access (DOAJ) DOI: 10.3390/inorganics13030097

Dielectric‐Confinement‐Induced in‐Plane Photoelectric Anisotropy in Isotropic Quasi‐1D γ‐GaS Nanoribbon

Jiawei Jing, Jiamei Chen, Xing Xin, Peisong Peng et al. • Advanced Science (2026)

ABSTRACT The growing demand for polarized photodetection has driven the need for compact, integrated, and multifunctional device architectures. Although one‐dimensional (1D) materials are of significant interest for their innate polarizatio...

DOAJ Open Access (DOAJ) DOI: 10.1002/advs.75736

Achieving high thermal conductivity of Al–50Si alloy through heat treatment and its microstructural evolution

Chao Ding, Huali Hao, Rui Ma, Changqing Ye et al. • Journal of Materials Research and Technology (2023)

Al–50Si alloys were prepared by powder extrusion and characterized for electronic packaging. The optimization of powder size, extrusion temperature, and heat treatment parameters was performed to enhance the microstructure and thermo-physic...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2023.11.038

Phase prediction, microstructure and high hardness of novel light-weight high entropy alloys

Jon Mikel Sanchez, Iban Vicario, Joseba Albizuri, Teresa Guraya et al. • Journal of Materials Research and Technology (2019)

Guided by CALPHAD modeling, low-density and multiphase three novel High Entropy Alloys (HEAs), Al40Cu15Cr15Fe15Si15, Al65Cu5Cr5Si15Mn5Ti5 and Al60Cu10Fe10Cr5Mn5Ni5Mg5 were produced by large scale vacuum die casting. A mixture of simple and ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2018.06.010

Effects of Annealing and Deformation on Sagging Resistance of a Hot-Rolled, Four-Layered Al Alloy Clad Sheet

Minglong Kang, Li Zhou, Yunlai Deng, Jinqin Lei • Advances in Materials Science and Engineering (2021)

Multilayer brazeable aluminum alloy sheet is prone to collapse during high-temperature brazing process. The sagging resistance of the aluminum composite sheet needs to be further improved for quality control. Effects of annealing and rate o...

DOAJ Open Access (DOAJ) DOI: 10.1155/2021/6625548

Quantum computing with neutral atoms

Loïc Henriet, Lucas Béguin, Adrien Signoles, Thierry Lahaye et al. • Quantum (2020)

The manipulation of neutral atoms by light is at the heart of countless scientific discoveries in the field of quantum physics in the last three decades. The level of control that has been achieved at the single particle level within arrays...

OPENALEX cc-by DOI: https://doi.org/10.22331/q-2020-09-21-327

Solid-State Materials for Opto-Spintronics: Focus on Ferromagnets and 2D Materials

Ana-Maria Florea (Raduta), Stefan Caramizoiu, Ana-Maria Iordache, Stefan-Marian Iordache et al. • Solids (2025)

Opto-spintronics is an emerging field that focuses on harnessing light to manipulate and analyze electron spins to develop next-generation electronic devices. This paper explores recent progress and the role of solid-state materials in opto...

DOAJ Open Access (DOAJ) DOI: 10.3390/solids6020025

Lightweight Anonymous Group Authentication and Quantum-Cloud Key Distribution Based on PUF for Classical Network Environments

Huanjie Zhang, Yang Chen, Shenghao Chen, Zilong Zhao et al. • Sensors (2026)

With the rapid development of quantum computing, in response to its disruptive threats to traditional cryptosystems and the urgent demand for lightweight and highly scalable secure group communication among resource-constrained devices in l...

DOAJ Open Access (DOAJ) DOI: 10.3390/s26154840

A Competitive Design and Material Consideration for Fabrication of Polymer Electrolyte Membrane Fuel Cell Bipolar Plates

Noor Ul Hassan, Bahadir Tunaboylu, Ali Murat Soydan • Designs (2019)

The bipolar plate is one of the most significant components of a polymer electrolyte membrane (PEM) fuel cell, and contributes substantially to the cost structure and the weight of the stacks. A number of graphite polymer composites with di...

DOAJ Open Access (DOAJ) DOI: 10.3390/designs3010013

Externally triggered drug delivery systems

Huiyang Hu, Prabhakar Busa, Yue Zhao, Chao Zhao • Smart Materials in Medicine (2024)

Externally triggered drug delivery systems empower patients or healthcare providers to utilize external stimuli to initiate drug release from implanted systems. This approach holds significant potential for clinical disease management, offe...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.smaim.2024.08.004

A Systematic Literature Review on Modern Cryptographic and Authentication Schemes for Securing the Internet of Things

Tehseen Hussain, Fraz Ahmad, Dr. Zia Ur Rehman • NUML International Journal of Engineering and Computing (2026)

The rapid integration of the Internet of Things (IoT) into healthcare ecosystems has revolutionized patient monitoring and data accessibility; however, it has simultaneously expanded the cyber-attack surface, leaving sensitive medical data ...

DOAJ Open Access (DOAJ)

Data Mining Techniques for Predictive Maintenance in Manufacturing Industries a Comprehensive Review

Chinthamu Narender, Ashish, P Mathiyalagan, B Devananda Rao et al. • ITM Web of Conferences (2025)

Predictive maintenance (PdM) is one of the major methods used in modern manufacturing to realize downtime minimization, lower the cost of maintenance and maximize machine service life by analyzing the collected data using data mining method...

DOAJ Open Access (DOAJ) DOI: 10.1051/itmconf/20257605012

Adversarial XAI Methods in Cybersecurity

Aditya Kuppa, Nhien‐An Le‐Khac • IEEE Transactions on Information Forensics and Security (2021)

Machine Learning methods are playing a vital role in combating ever-evolving threats in the cybersecurity domain. Explanation methods that shed light on the decision process of black-box classifiers are one of the biggest drivers in the suc...

OPENALEX cc-by-nc-nd DOI: https://doi.org/10.1109/tifs.2021.3117075