Home »
Academic Articles & Research Papers
Showing 20 of 757 academic articles
Hang Lei, Wenjibin Sun, Yujun Zuo, Zhonghu Wu et al. • Scientific Reports
(2025)
Abstract The micromechanical properties of organic matter (OM) and organic pore structures in the over-mature stage are crucial for determining shale reservoir quality and assessing shale gas resource potential. However, there is still deba...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41598-025-89164-0
B. Oleksiak, M. Kozioł, J. Wieczorek, M. Krupa et al. • Metalurgija
(2015)
In the present paper, results of the research on application of residual fine-grained, carbon-bearing materials as coke substitutes in the shaft process of copper matter smelting are discussed. The addition was introduced into the charge as...
DOAJ
Open Access (DOAJ)
Zhao Z.-Y., Zhao J.-X., Cui Y., Lu L. et al. • Journal of Mining and Metallurgy. Section B: Metallurgy
(2020)
The physicochemical properties of slag are of great importance in pyrometallurgy. If there is a volatile component in the slag, evaporation will inevitably occur. As a result, the slag composition will change, and the measured results will ...
DOAJ
Open Access (DOAJ)
DOI: 10.2298/JMMB190509046Z
Juliana Zottis, Carla Adriana Theis Soares Diehl, Alexandre da Silva Rocha • Journal of Materials Research and Technology
(2018)
The purpose of this paper is to investigate the correlation of strain and hardness parameters in a drawing process chain of an SAE 1045 steel bar. The present work discusses the application of the experimental and numerical method of analys...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2018.01.004
Helena Podrouzkova, Vera Feitova, Roman Panovsky, Jaroslav Meluzin et al. • Biomedical Papers
(2015)
Background: Advances in nanotechnology have lead to the development of a novel contrast media for Magnetic Resonance Imaging (MRI) - the superparamagnetic iron oxide nanoparticle (SPIO). SPIO nanoparticles are used to image inflammation on...
DOAJ
Open Access (DOAJ)
DOI: 10.5507/bp.2014.030
Hodoši R., Nováková E., Šupolíková M. • European Pharmaceutical Journal
(2021)
The method for separation of viral particles in a concentrated form from the environment is called virus purification. Viruses are required to be purified for a range of studies in which it is necessary to distinguish the properties or stru...
DOAJ
Open Access (DOAJ)
DOI: 10.2478/afpuc-2021-0009
Aghil Asadi, Mohsen Najafi, Hossien Bouhnedi, Mehdi Haji Bagherian • علوم و تکنولوژی پلیمر
(2021)
Hypothesis: The volume of studies conducted on biopolymeric materials emphasizes the high-consumption of polymers in biomaterial fields, especially in cosmetics industry which must be resistant to different kinds of microorganisms and bacte...
DOAJ
Open Access (DOAJ)
DOI: 10.22063/jipst.2021.1779
Syed Bustan Fatima Warsi, Biranchi Panda, Pankaj Biswas • Developments in the Built Environment
(2023)
3D Concrete Printing (3DCP) is a growing field of sustainable technology that offers an avenue for rapid industrialisation of the construction industry. Over the years, many non-structural elements have been fabricated by 3D printing, thus ...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.dibe.2023.100295
F.O. Oluyemi, E.D. Ogunmola, A.A. Ajayi, O.C. Olawole • Results in Optics
(2023)
Copper oxide precursor solutions containing 0.10 M, 0.15 M, 0.20 M and 0.25 M concentration of copper were deposited on a glass substrate using the spray pyrolysis method. The structural, optical and surface properties of the resulting copp...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.rio.2023.100416
Saeed Bidi, Phoevos Koukouvinis, Andreas Papoutsakis, Armand Shams et al. • Ultrasonics Sonochemistry
(2022)
An explicit density-based solver of the Euler equations for inviscid and immiscible gas–liquid flow media is coupled with real-fluid thermodynamic equations of state supporting mild dissociation and calibrated with shock tube data up to 500...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.ultsonch.2022.106175
X.B. Ye, B.C. Pan • Nuclear Materials and Energy
(2023)
Since tungsten (W) was considered as the most promising plasma facing materials (PFMs) in fusion reactors, there has been extensive research on the physical performance of W-PFMs. It is found that under the extreme conditions in a fusion re...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.nme.2023.101447
H.-C. Jung, B.-K. Moon, J. Wie, H.-S. Park et al. • Geoscientific Model Development
(2019)
Recently, Earth system models (ESMs) have begun to
consider the marine ecosystem to reduce errors in climate simulations.
However, many models are unable to fully represent the ocean-biology-induced
climate feedback, which is due in part to...
DOAJ
Open Access (DOAJ)
DOI: 10.5194/gmd-12-699-2019
Anne-Sophie Bonnet-Lebrun, Anne-Sophie Bonnet-Lebrun, Maria P. Dias, Maria P. Dias et al. • Frontiers in Marine Science
(2021)
Every year, billions of birds undertake extensive migrations between breeding and non-breeding areas, facing challenges that require behavioural adjustments, particularly to flight timing and duration. Such adjustments in daily activity pat...
DOAJ
Open Access (DOAJ)
DOI: 10.3389/fmars.2021.683071
Chao Liu, Xi Wang, Hanjiang Luo, Yuan Liu et al. • IEEE Access
(2019)
Localization has always been an essential application of underwater acoustic sensor networks (UASNs), which plays an important role in routing strategies design, node recycling, and so on. The complex ocean condition, prior infrastructure d...
DOAJ
Open Access (DOAJ)
DOI: 10.1109/ACCESS.2019.2925938
Debasmita Chatterje, Dipankar Halder, Satadal Das • Journal of Clinical and Diagnostic Research
(2021)
Introduction: Around 2000 species of mushrooms exist in
nature, of which hardly 25 varieties are accepted as edible in
nature. “Nutraceuticals” are food substances that are associated
with immense health benefits and also hinder the deve...
DOAJ
Open Access (DOAJ)
DOI: 10.7860/JCDR/2021/47240.14660
Jazmín Vanessa Pérez-Pazos, Deimer Fuentes-Cassiani, Sol-Mara Regino, Jorge-Luis García et al. • Plants
(2025)
The production of high-quality cassava planting material is a key strategy for mitigating the spread of pests and diseases. To promote the adoption of such strategies by farmers, it is essential to strengthen local capacities through knowle...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/plants14192983
Paritosh Mishra, Brijesh Prasad, Sunil Chamoli, Ibrahim M. Alarifi • Journal of Materials Research and Technology
(2026)
The escalating demand for lightweight, high-strength structures in the aerospace and automotive sectors necessitates robust joining technologies for dissimilar aluminium alloys. This study systematically investigates the effects of friction...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2026.08.256
Islam Sayah, Ibtissem Chakroun, Claudio Gervasi, Davide Barreca et al. • Foods
(2025)
Bacterial nanocellulose (BNC) has gained considerable interest over the last decade due to its unique properties and versatile applications. However, the low yield and the high production cost significantly limit its industrial scalability....
DOAJ
Open Access (DOAJ)
DOI: 10.3390/foods14162853
Ella Schoolaert, Luisa Cossu, Jana Becelaere, Joachim F.R. Van Guyse et al. • Materials & Design
(2020)
This work shows the design of highly porous membranes with tunable wettability based on poly(2-n-propyl-2-oxazoline) (PnPrOx) nanofibers. Wicking and advanced contact angle experiments demonstrate the high potential for applications requiri...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.matdes.2020.108747
Petros Petrounias, Panagiota P. Giannakopoulou, Aikaterini Rogkala, Maria Kalpogiannaki et al. • Applied Sciences
(2022)
This study was based on the reduction of the extraction of natural resources and, at the same time, was focused on the use of by-products and various wastes in construction applications by following the principles of circular economy. Steri...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/app12125861