Reset
Showing 20 of 914 academic articles

Evaluating Load-Conditional Convergence in Lithium-Ion Battery Degradation: A Matched-Group Statistical Framework

Nnamdi C. Aronwora, Chibuzo Nwabufo Okwuosa, Jang-Wook Hur • IEEE Access (2026)

The rate of capacity fade in a lithium-ion battery following a transition to a new discharge current is widely assumed to equal that of a battery that has always operated at the destination current, an implicit premise referred to here as l...

DOAJ Open Access (DOAJ) DOI: 10.1109/ACCESS.2026.3732470

An object-oriented design method to implement the mechatronic system control by using hybrid automata and real-time UML

Vu Duy Quang, Ngo Van Hien • Vietnam Journal of Mechanics (2011)

In this paper, we present a method, which is based on hybrid automata and Real-Time Unified Modeling Language (UML) to analyze and design the control parts of mechatronic systems with input or output events and signals in order to effective...

DOAJ Open Access (DOAJ) DOI: 10.15625/0866-7136/33/3/211

Forecasting Warping Deformation Using Multivariate Thermal Time Series and K-Nearest Neighbors in Fused Deposition Modeling

Donghwan Song, Adrian Matias Chung Baek, Jageon Koo, Moise Busogi et al. • Applied Sciences (2020)

Over the past decades, additive manufacturing has rapidly advanced due to its advantages in enabling diverse material usage and complex design production. Nevertheless, the technology has limitations in terms of quality, as printed products...

DOAJ Open Access (DOAJ) DOI: 10.3390/app10248951

Consumers' Perception of Urban Farming—An Exploratory Study

Carola Grebitus, Lauren Chenarides, Rebecca Muenich, Alex Mahalov • Frontiers in Sustainable Food Systems (2020)

Urban agriculture offers the opportunity to provide fresh, local food to urban communities. However, urban agriculture can only be successfully embedded in urban areas if consumers perceive urban farming positively and accept urban farms in...

DOAJ Open Access (DOAJ) DOI: 10.3389/fsufs.2020.00079

SARS-CoV-2 Omicron BA.2.75 Variant May Be Much More Infective than Preexisting Variants Based on In Silico Model

Aki Sugano, Yutaka Takaoka, Haruyuki Kataguchi, Mika Ohta et al. • Microorganisms (2022)

Previously, we developed a mathematical model via molecular simulation analysis to predict the infectivity of six SARS-CoV-2 variants. In this report, we aimed to predict the relative risk of the recent new variants of SARS-CoV-2 based on o...

DOAJ Open Access (DOAJ) DOI: 10.3390/microorganisms10102090

Inclusiveness, Equity, Consistency, and Flexibility as Guiding Criteria for Enabling Transdisciplinary Collaboration: Lessons From a European Project on Nature-Based Solutions and Urban Innovation

Claudia Basta, Eva Kunseler, Christine Wamsler, Alexander van der Jagt et al. • Frontiers in Climate (2021)

The structural research programmes of the European Union dedicated to advance the sustainability sciences are increasingly permeated by the notion of transdisciplinarity (TD). A growing body of literature residing at the intersection of res...

DOAJ Open Access (DOAJ) DOI: 10.3389/fclim.2021.630075

Review on the Role of Corporate Governance and Internal Control System on Firms’ Financial Performance

Omar Turki Hazzaa, Dewi Fariha Abdullah, Adel Mohammed Dhahebi • Asian Journal of Accounting Perspectives (2022)

Research aim: This research analyses the systematic review of the literature (2015–2021) concerning corporate governance, internal control system, and their impact on financial performance. This study brings about several findings on the ro...

DOAJ Open Access (DOAJ) DOI: 10.22452/AJAP.vol15no1.1

Unveiling Area Estimation through Newton's Forward Divided Difference Method

Nurzalina Harun, Zubaidah Sadikin, Che Nurul Hanna Che Sulaiman, Nur Hamiza Basri et al. • Malaysia Journal of Invention and Innovation (2024)

In this era of globalization and technological advancements, Malaysia stands out as a vibrant hub for innovations and technology, along with an entrepreneurial spirit. However, it appears that there will be occasions when the creation of ...

DOAJ Open Access (DOAJ)

On Security and Throughput for Energy Harvesting Untrusted Relays in IoT Systems Using NOMA

Van Nhan Vo, Chakchai So-In, Hung Tran, Duc-Dung Tran et al. • IEEE Access (2019)

In this paper, we analyze the secrecy and throughput of multiple-input single-output (MISO) energy harvesting (EH) Internet of Things (IoT) systems, in which a multi-antenna base station (BS) transmits signals to IoT devices (IoTDs) with th...

DOAJ Open Access (DOAJ) DOI: 10.1109/ACCESS.2019.2946600

Influence of Radar Parameters and Sea State on Wind Wave-Induced Velocity in C-Band ATI SAR Ocean Surface Currents

Rui Zhang, Jie Zhang, Xi Zhang, Chenghui Cao et al. • Remote Sensing (2022)

Wind wave-induced artifact surface velocity (WASV) is an important component of the sea surface motions detected by synthetic aperture radar (SAR) systems. Understanding the characteristics of the interference of WASV on SAR current velocit...

DOAJ Open Access (DOAJ) DOI: 10.3390/rs14174135

An Integral Model to Provide Reactive and Proactive Services in an Academic CSIRT Based on Business Intelligence

Walter Fuertes, Francisco Reyes, Paúl Valladares, Freddy Tapia et al. • Systems (2017)

Cyber-attacks have increased in severity and complexity. That requires, that the CERT/CSIRT research and develops new security tools. Therefore, our study focuses on the design of an integral model based on Business Intelligence (BI), which...

DOAJ Open Access (DOAJ) DOI: 10.3390/systems5040052

Tribological and flexural characterization of dissimilar AA2024-T3/AA6082-T6 friction stir welded joints

Paritosh Mishra, Brijesh Prasad, Sunil Chamoli, Ibrahim M. Alarifi • Journal of Materials Research and Technology (2026)

The escalating demand for lightweight, high-strength structures in the aerospace and automotive sectors necessitates robust joining technologies for dissimilar aluminium alloys. This study systematically investigates the effects of friction...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2026.08.256

Developing a Framework for Using Molecular Dynamics in Additive Manufacturing Process Modelling

Panagiotis Stavropoulos, Vasiliki Christina Panagiotopoulou • Modelling (2022)

Additive Manufacturing (AM), or else Smart Manufacturing, has been an intrinsic concept in Industry 4.0, offering flexibility and material efficiency. Certain limitations prevent AM from being used in the industrial setting extensively, des...

DOAJ Open Access (DOAJ) DOI: 10.3390/modelling3010013

User perspectives on AI explainability in aerospace manufacturing: a Card-Sorting study

Sofia Morandini, Federico Fraboni, Mark Hall, Santiago Quintana-Amate et al. • Frontiers in Organizational Psychology (2025)

The integration of AI technologies in aerospace manufacturing is significantly transforming critical operational processes, impacting decision-making, efficiency, and workflow optimization. Explainability in AI systems is essential to ensur...

DOAJ Open Access (DOAJ) DOI: 10.3389/forgp.2025.1538438

Quantitative Detection of High-Strength Bolt Loosening Based on Self-Magnetic Flux Leakage

Shangkai Liu, Kai Tong, Fengmin Chen, Senhua Zhang et al. • Buildings (2026)

The reliability of high-strength bolted connections is critical to the safety of large-scale engineering structures. This study proposes a non-contact quantitative method for detecting bolt loosening based on the self-magnetic flux leakage ...

DOAJ Open Access (DOAJ) DOI: 10.3390/buildings16030497