Reset
Showing 20 of 56 academic articles

Optical Properties of Composites of Polymethylmethacrylate and Polyethylene with Micron Particles of Graphitic Carbon Nitride

S. Maksimov, V. Shaposhnikov, V. Borisenko • Доклады Белорусского государственного университета информатики и радиоэлектроники (2026)

Film heterostructures made of polymethyl methacrylate and low-density polyethylene with incorporated micron-sized particles of a semiconductor (graphite-like carbon nitride g-C3N4), fabricated using a component mixing and casting technique,...

DOAJ Open Access (DOAJ) DOI: 10.35596/1729-7648-2026-24-3-36-43

Organic Waste Bio-Based Materials for 3D Extrusion

Carolina Vasco Costa Delgado, Gabriela Alexandra da Cunha Santos Forman, Rebecca Louise Antoinette Breuer • Convergências - Revista de Investigação e Ensino das Artes (2022)

This study explores bioplastics fabrication based on alginate polymer with added glycerine as a plasticizer, creating flexibility, and organic waste was used as a filler avoiding shrinkage. Exploratory, observational and experimental, Lit...

DOAJ Open Access (DOAJ) DOI: 10.53681/c1514225187514391s.29.133

Utilizing Waste Cotton/Pigeon Pea Stalk Fibers Composites for Enhanced Sound Absorption and Insulation in Automotive Interiors

Ariharasudhan Subramanian, Senthil Kumar Selvaraj, Rajaram Mani, Preethibha Chandrasekaran et al. • Journal of Natural Fibers (2024)

This study investigates the synthesis and characterization of composite materials, pigeon pea stem, and cotton fibers blended in different ratios such as 100/0, 70/30, 60/40, 50/50, 30/70, and 0/100. These composite materials were produced ...

DOAJ Open Access (DOAJ) DOI: 10.1080/15440478.2024.2333940

TECHNOLOGY DEVELOPMENT FOR THE SEPARATION OF MULTILAYER COMPOSITES

Гітіс МІЛЯУСКАС, Гінтарас ДЕНАФАС • Ecology, Human, Society (2024)

Waste Printed Circuit Boards (WPCBs) are integral components of virtually all electrical and electronic equipment (EEE), forming the structural backbone of the electronics industry. Classified into single-sided, double-sided, multilayer, ri...

DOAJ Open Access (DOAJ) DOI: 10.20535/EHS2710-3315.2024.306206

Principles of Materials Science and Engineering

William F. Smith • Journal of International Crisis and Risk Communication Research (1986)

This book attempts to provide basic knowledge about the structure, properties, and processing of engineering materials and their applications. The first chapter gives an introduction to materials science and engineering and briefly describe...

OPENALEX Open Access

Simulation and experimental verification of the edge effect of composites on the infiltration process of RTM forming

ZHU Hongye, WANG Xiaoxu, LYU Jixiang, HAO Shulei • Xi'an Gongcheng Daxue xuebao (2025)

To study the influence of edge effects on the resin filling flow pattern in the RTM process of composite materials, the finite element software PAM-RTM was used to simulate and analyze the impregnation process of the blade preforms in RTM.B...

DOAJ Open Access (DOAJ) DOI: 10.13338/j.issn.1674-649x.2025.04.002

Extraction of nano-crystalline cellulose for development of aerogel: Structural, morphological and antibacterial analysis

Yash Vishnoi, Alok Kumar Trivedi, M.K. Gupta, Harinder Singh et al. • Heliyon (2024)

In the present decades, nanocellulose has been very popular in the field of nanotechnology and is receiving much attention from researchers because of its advantageous physicochemical properties, high aspect ratio, and high specific strengt...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.heliyon.2023.e23846

Investigation of Microstructure and Mechanical Behavior of Nanomodified Cement-Based Materials

Spyridoula G. Farmaki, Dimitrios A. Exarchos, Vasileios Dracopoulos, Anastasios Gkotzamanis et al. • Applied Mechanics (2026)

Recent advances in nanotechnology have highlighted the transformative potential of carbon-based nanomaterials, such as carbon nanofibers, carbon nanotubes, and graphene, in cementitious systems. These materials have shown a remarkable abili...

DOAJ Open Access (DOAJ) DOI: 10.3390/applmech7010013

Impact of biomass ash content on biocomposite properties

Xianhui Zhao, Oluwafemi Oyedeji, Erin Webb, Sanjita Wasti et al. • Composites Part C: Open Access (2022)

Owing to its low cost and sustainable nature, lignocellulosic biomass has been utilized for reinforcing polymers, but it is crucial to understand the impact of high-ash concentrations in biomass on composite strength and processing. Biomass...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jcomc.2022.100319

Effects of Titanate Coupling Agent on Engineering Properties of Asphalt Binders and Mixtures Incorporating LLDPE-CaCO3 Pellet

Mohd Rosli Mohd Hasan, Zhanping You, Mohd Khairul Idham Mohd Satar, Muhammad Naqiuddin Mohd Warid et al. • Applied Sciences (2018)

This study was initiated to evaluate the performance of asphalt binders and mixtures incorporating linear low-density polyethylene- calcium carbonate (LLDPE-CaCO3) pellet, either with or without titanate coupling agent. The detailed manufac...

DOAJ Open Access (DOAJ) DOI: 10.3390/app8071029

Effects of adding bamboo fiber on various aspects of concrete performance: A state-of-the-art review

Longping Yan, Muwang Wei, Lei Huang, Huawei Li et al. • KSCE Journal of Civil Engineering (2026)

This review systematically examines the role of bamboo fiber (BF) in enhancing the performance of cement-based composites, with a particular focus on workability, mechanical properties, durability, and sustainability. BF, as a renewable and...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.kscej.2026.100676

Integration of remote sensing and geophysics in geological mapping of southern block of Chitradurga Schist Belt areas in upstream Cauvery basin, Western Dharwar Craton, Karnataka

Samarth Urs M, Nagendra P, B.V. Suresh Kumar • Results in Earth Sciences (2025)

We present mapping and comparision of the geology of the southern block of the Chitradurga schist belt (CSB). We have used ASTER images and geophysical data to compare the geology. Consequently, present study confirms how remote sensing int...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.rines.2025.100117

Misalignment-modulated magnetoelastic transduction for field-tunable stiffness in chain-like magnetorheological elastomers: a Green-function-weighted traction-transfer framework

ShuLei Sun, Kesheng Zhang, Shunke Zhang, Ning Tian et al. • Materials Research Express (2026)

Magnetorheological elastomers (MREs) are field-responsive composites whose stiffness can be tuned by a magnetic field. In chain-like MREs, strong local magnetic interactions and Maxwell tractions do not necessarily translate into a measurab...

DOAJ Open Access (DOAJ) DOI: 10.1088/2053-1591/aeb47a

Grain boundary and texture evolution of TiB/Ti–2Al–6Sn titanium matrix composite under electroshocking treatment

Yaya Wu, Yan Wen, Anan Guo, Jian Zhou et al. • Journal of Materials Research and Technology (2023)

This work used electroshocking treatment (EST) plus external loading to regulate the microstructure of titanium matrix composites (TMCs). The external loading was 0.3 MPa. After EST plus external loading with 0.3 MPa, the α was reduced to 2...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2023.10.177

3D Printing parameter optimisation combined with heat treatment for achieving high density and enhanced performance in refractory high-entropy alloys

Deyu Jiang, Miao Luo, Changxi Liu, Yashuo Zhang et al. • Virtual and Physical Prototyping (2025)

In this study, a Ti1.5Nb1Ta0.5Zr1Mo0.5 (TNTZM) high-entropy alloy was fabricated using laser powder bed fusion (LPBF). By integrating 63 sets of parameter trials with machine learning (ML) models, an optimised process window was identified,...

DOAJ Open Access (DOAJ) DOI: 10.1080/17452759.2025.2524524

Application of Microwave Polarimetry to the Characterization of Fiber Misalignment in Composites

Matthew Dvorsky, Daniela Munalli, Mohammad Tayeb Al Qaseer, Reza Zoughi • IEEE Open Journal of Instrumentation and Measurement (2022)

In this paper synthetic aperture radar (SAR) polarimetry techniques are applied to detect and characterize fiber misalignment in both carbon fiber sheets and glass fiber reinforced polymer (GFRP) composites. The principle behind SAR polarim...

DOAJ Open Access (DOAJ) DOI: 10.1109/OJIM.2022.3184347

Research progress in high thermal conductivity of silicon carbide matrix composites reinforced with fibers

CHEN Qiang, LI Shun, ZHU Li'an, BAI Shuxin et al. • Cailiao gongcheng (2023)

As one kind of advanced high temperature structural and functional materials, it is necessary for fiber reinforced silicon carbide matrix composites (SiC CMCs) in the field of thermal management (TM) to combine the efficient heat transfer a...

DOAJ Open Access (DOAJ) DOI: 10.11868/j.issn.1001-4381.2023.000079