Reset
Showing 20 of 43 academic articles

Design and characterize of kirigami-inspired springs and the application in vertebrae exoskeleton for adolescent idiopathic scoliosis brace treatment

Qiwen Emma Lei, Jing Shu, Junming Wang, Hoi Yan Cheung et al. • Frontiers in Mechanical Engineering (2023)

Adolescent idiopathic scoliosis is a common condition that affects children between the age of 10 and young adulthood. Rigid brace treatment is an effective treatment to control the progression of spinal deformity. However, it limits mobili...

DOAJ Open Access (DOAJ) DOI: 10.3389/fmech.2023.1152930

Alterations in Hip and Knee Joint Contact Force Waveforms and Orientation Induced by Gait Modifications: A Case Study

Laura Rathmair, Willi Koller, Clara Egner, Kevin Kitir et al. • Current Issues in Sport Science (2026)

Introduction & Purpose Idiopathic torsional deformities of lower limb bones can affect a patient’s gait pattern and joint health, while their cause remains unidentified (Koller et al., 2026). Abnormal joint loadings and the progression of ...

DOAJ Open Access (DOAJ) DOI: 10.36950/2026.5ciss011

Finite element analysis on the near field properties of metallic cavities with atomic sharpness

Qiyuan Dai, Liang Ma, Li Li, Guangjun Tian • Results in Physics (2023)

Using finite element calculations, we investigated the near field properties of two types of commonly used metal nanostructures (a tip-substrate model representing a scanning tunneling microscope type setup (TS) and a nanoparticle-on-mirror...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.rinp.2023.106360

Simulation and experimental verification of the edge effect of composites on the infiltration process of RTM forming

ZHU Hongye, WANG Xiaoxu, LYU Jixiang, HAO Shulei • Xi'an Gongcheng Daxue xuebao (2025)

To study the influence of edge effects on the resin filling flow pattern in the RTM process of composite materials, the finite element software PAM-RTM was used to simulate and analyze the impregnation process of the blade preforms in RTM.B...

DOAJ Open Access (DOAJ) DOI: 10.13338/j.issn.1674-649x.2025.04.002

Numerical investigation of corroded middle‐high strength pipeline subjected to combined internal pressure and axial compressive loading

Linlin Lu, Lecai Liang • Energy Science & Engineering (2021)

Abstract Buried oil and gas pipelines may face the threat of geological disasters such as landslides, faults, and floods. However, long‐term buried oil and gas pipelines often have corrosion defects, which bring greater challenges to the sa...

DOAJ Open Access (DOAJ) DOI: 10.1002/ese3.830

top-ii-vol: Massively Parallel Scalable Meshing for Seismic Risk Assessment of Nuclear Sites

Badri M.A., Bourcier C., Foerster E. • EPJ Web of Conferences (2024)

High performance computing is widely used for conducting high-resolution geophysics Finite Element Method (FEM) simulations. These simulations are crucial for risk assessment at nuclear sites and help gain deeper insights into underlying ph...

DOAJ Open Access (DOAJ) DOI: 10.1051/epjconf/202430205007

Enhanced Absorption with Graphene-Coated Silicon Carbide Nanowires for Mid-Infrared Nanophotonics

Patrick Rufangura, Iryna Khodasevych, Arti Agrawal, Matteo Bosi et al. • Nanomaterials (2021)

The mid-infrared (MIR) is an exciting spectral range that also hosts useful molecular vibrational fingerprints. There is a growing interest in nanophotonics operating in this spectral range, and recent advances in plasmonic research are aim...

DOAJ Open Access (DOAJ) DOI: 10.3390/nano11092339

Study of a constrained finite element elbow prosthesis: the influence of the implant placement

Lorenzo Nalbone, Francesco Monac, Luca Nalbone, Tommaso Ingrassia et al. • Journal of Orthopaedics and Traumatology (2023)

Abstract Background The functional results of total elbow arthroplasty (TEA) are controversial and the medium- to long-term revision rates are relatively high. The aim of the present study was to analyze the stresses of TEA in its classic c...

DOAJ Open Access (DOAJ) DOI: 10.1186/s10195-023-00690-x

Deflection and bending moment dynamic load allowance of runway bridges: Theoretical and numerical studies

Yuxin Xue, Wei Hou, Yongjun Zhou, Huichi Li et al. • Journal of Traffic and Transportation Engineering (English ed. Online) (2026)

Runway bridges offer a practical structural solution for airport construction in terrain-constrained areas. However, their dynamic behavior under aircraft landing loads remains insufficiently studied, and design-oriented theoretical guidanc...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jtte.2026.01.002

Computational analysis of visible frequency plasmonic properties of graphene on wide band gap heterostructures

Muhammad Qamar, Ghulam Abbas, Meiyong Liao, Satoshi Koizumi et al. • Scientific Reports (2026)

Abstract Control over plasmonic properties and local electric field enhancement has become an essential aspect of many modern technologies. Here we investigate these phenomena in graphene / hexagonal boron nitride (G/h-BN) heterostructures ...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-026-40039-y

The Thermomechanical Finite Element Analysis of 3003-H14 Plates Joined by the GMAW Process

Maribel Hernández, Ricardo R. Ambriz, Christian García, David Jaramillo • Metals (2020)

The gas metal arc welding (GMAW) process was used to weld 3003-H14 plates under restricted and unrestricted thermal expansion. Experimental and numerical analysis were conducted to determine the relation between weld thermal cycles and resi...

DOAJ Open Access (DOAJ) DOI: 10.3390/met10060708

Field Observations and Failure Analysis of an Excavation Damaged Zone in the Horonobe Underground Research Laboratory

Kazuhei AOYAGI, Eiichi ISHII, Tsuyoshi ISHIDA • Journal of MMIJ (2017)

In the construction of a deep underground facility, the hydromechanical properties of the rock mass around an underground opening are changed significantly due to stress redistribution. This zone is called an excavation damaged zone (EDZ). ...

DOAJ Open Access (DOAJ) DOI: 10.2473/journalofmmij.133.25