Optimization of Operational Parameters for Bio‑Oil Production from Municipal Solid Waste via Microwave Pyrolysis

Journal: Journal of Renewable Energy and Environment • • Materials and Energy Research Center (MERC) • ISSN: 2423-5547

Abstract

The efficiency of bio-oil production from municipal solid waste was investigated using microwave-assisted pyrolysis. The effects of temperature, pyrolysis time, and microwave power on bio-oil yield were evaluated using Response Surface Methodology (RSM), and optimal operating conditions were determined. In parallel, seven machine learning algorithms were applied to predict bio-oil yield, among which the Gaussian Process Regression model showed the highest performance, with an R² of 0.9714. Temperature was identified as the most influential factor in the prediction. The produced bio-oil was characterized in terms of its physical properties and chemical composition. The optimal process conditions were found to be 329.82 °C, 28.47 min, and 447.38 W. Temperature showed an initial increasing and then decreasing effect on yield, with higher temperatures favoring lighter hydrocarbons, while pyrolysis time exhibited a consistently positive effect on bio-oil production. These results confirm the effectiveness of microwave pyrolysis for converting municipal waste into bio-oil and highlight the value of combining RSM and machine learning for process optimization.

Subjects & Keywords

How to Cite this Article

Mazen Kadhim Shekedl, Farhad Salimi, Neda Azimi (2026). "Optimization of Operational Parameters for Bio‑Oil Production from Municipal Solid Waste via Microwave Pyrolysis". Journal of Renewable Energy and Environment. https://doi.org/10.30501/jree.2026.563599.2716