Found 14 document(s)
Page 1 of 1
-
Arsenic is one of the most toxic elements present in the environment, especially in water. The World Health Organization (WHO) recommends a maximum concentration of arsenic in drinkable water of 10 µg/L (10 ppb). Sensors...
-
Because this symposium is also organized to mark the establishment of Optics and Photonics at IIT-Delhi, this talk will aim at paying a tribute to the collaboration between our two institutes in the field of fiber optics...
-
Ces travaux font partie intégrante du projet DROÏD qui vise au développement d'un dosimètre réparti à fibre optique. Il est donc nécessaire de développer une fibre très sensible aux radiations gamma. Pour cela, il est pr...
-
RÉSUMÉ: Nous proposons une analyse numérique d'une fibre amplifiant les groupes de modes LP11 et LP21 d'une fibre faiblement multimode avec un gain modal différentiel ajustable. La fibre se compose d'un cœur central et d...
-
Experimental observation of the self-induced laser line sweeping (SLLS) in fiber ring lasers is presented. The SLLS with the same gain fiber is studied in Fabry-Perot cavity for comparison. The SLLS effect manifests itse...
-
Rare earth (RE) doped silica-based optical fibers with transparent glass ceramic (TGC) core was fabricated through the well-known modified chemical vapor deposition (MCVD) process without going through the commonly used ...
-
Les lasers à fibres émettant vers 800 nm sont développées pour différentes applications telles que le médical ou le pompage des fibres dopées au Bi. Nous présentons dans cette communication la premie're modélisation numé...
-
Thulium-doped fibers suitable for core-pumped single-frequency lasers were fabricated by the modified chemical vapor deposition (MCVD) method. Refractive index profile, doping profile and spectral absorption was measured...
-
DNP are observed in fibres when alkaline-earth elements (Mg, Ca and Sr) are incorporated. Mean size of the DNP, deduced from SEM pictures, depends on the composition... This last composition leads to a low loss fibre... ...
-
An efficient method to fabricate transparent glass ceramic fibers containing in-situ grown Er3+-doped oxide nanoparticles is presented. Characterization of the drawn fibers exhibits low loss (0.4 dB/m) and broadened Er3+...
-
We analyze a multilayer leaky cladding (MLC) fibre using the finite element method and study the effect of the MLC on the bending loss and birefringence of two types of structures: i) a circular-core large-mode area stru...
-
We analyse the influence of heat generation by non radiative transitions in high power 1.55µm double cladding Erbium-Ytterbium fiber laser. At strong pumping rates, 1µm lasing can start due to parasitic reflections. We p...
-
In this paper we present results relative to Fiber Bragg Grating (FBG) photowritten in two kinds of Ge-doped microstructured optical fiber cores devoted to sensing applications. A cross comparison between theoretical and...