Reset
Showing 11 of 11 academic articles

Nanoparticle Deposition of Fluoropolymer CYTOP via Holographic Femtosecond Laser Processing and Its Biochip Application

Ryo Ozaki, Kotaro Ishida, Eiji Morita, Yasutaka Hanada • Applied Sciences (2020)

The fundamental characteristics of nanoparticle (NP) deposition of the fluoropolymer CYTOP using a femtosecond (fs) laser were investigated. In previous studies, we have demonstrated the microfluidic fabrication of CYTOP, which enables clea...

DOAJ Open Access (DOAJ) DOI: 10.3390/app10207243

The Effectiveness of Using Pulpotec® in Treatment of Pulpitis by Pulpotomy of Vital Deciduous Molar and Vital Immature Permanent Molar

Khudhair A Al- Salman, Baydaa A Al-Rawi, Omar S Rahawi • Al-Rafidain Dental Journal (2012)

Aims: To evaluate the effect of two types of disinfectant solutions(2% alkaline glutaraldehyde, 1% sodium hypochlorite) in wettability of three types of elastomeric impression materials (light body) which are used in crown and bridge restor...

DOAJ Open Access (DOAJ) DOI: 10.33899/rden.2012.45454

Controlling Frost Propagation on Polymeric Surfaces Using SI‐ATRP Chemical Micropatterning

Miisa J. Tavaststjerna, Stephen J. Picken, Santiago J. Garcia • Advanced Materials Interfaces (2025)

Abstract Micropatterned surfaces with both hydrophilic and hydrophobic regions are relevant for a wide range of applications from fuel cells to water harvesting systems. The preferential nucleation of water on hydrophilic regions can also b...

DOAJ Open Access (DOAJ) DOI: 10.1002/admi.202400838

Impact of solvents on doctor blade coatings and bathocuproine cathode interlayer for large-area organic solar cell modules

Soonil Hong, Byoungwook Park, Chandran Balamurugan, Jinho Lee et al. • Heliyon (2023)

Efforts to commercialize organic solar cells (OSCs) by developing roll-to-roll compatible modules have encountered challenges in optimizing printing processes to attain laboratory-level performance in fully printable OSC architectures. In t...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.heliyon.2023.e18209

Nanofibers with a tunable wettability by electrospinning and physical crosslinking of poly(2-n-propyl-2-oxazoline)

Ella Schoolaert, Luisa Cossu, Jana Becelaere, Joachim F.R. Van Guyse et al. • Materials & Design (2020)

This work shows the design of highly porous membranes with tunable wettability based on poly(2-n-propyl-2-oxazoline) (PnPrOx) nanofibers. Wicking and advanced contact angle experiments demonstrate the high potential for applications requiri...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.matdes.2020.108747

Experiment and analysis of water droplet wettability on superhydrophobic surfaces manipulated by electric field

Wang Qingcheng, Lou Yi, Zhang Deqing, Yang Xiaodong • ITM Web of Conferences (2025)

Electric field manipulates the change of droplets wettability on superhydrophobic surfaces, which is widely used in many fields such as electronic zoom microlens and electro wetting displays, and has an important research value. This paper ...

DOAJ Open Access (DOAJ) DOI: 10.1051/itmconf/20257701018

Manufacturing of a New Generations from the Recycled AL Scrape Reinforced with AL2O3 - GNS Composite Powder by Vortex Technique for Automotive Spare Parts

Fathei Nouh, Omayma El kady, Sabry abdel aziz • International Journal of Industry and Sustainable Development (2024)

This research addresses the urgent challenges facing the materials and metallurgical industries, driving manufacturers to seek innovative solutions for material recycling. Aluminum scrape in used to manufacture a composite material with a h...

DOAJ Open Access (DOAJ) DOI: 10.21608/ijisd.2024.302067.1074

Liquid lithium wettability studies on novel zirconium-alloyed porous tungsten

C. López Pérez, T. Marchhart, A. Marin, M. Nieto-Perez et al. • Nuclear Materials and Energy (2023)

Liquid lithium wettability has been investigated on novel zirconium-alloyed porous tungsten fabricated by the place-holder spark plasma sintering technique. This paper investigates the wetting properties of liquid lithium on the substrates ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.nme.2023.101525

Membrane surface wettability and roughness under operating conditions and their implications for membrane performance

Rawda Serag, M. Bassyouni, Fathy Shokry, Monica Toderaș et al. • Desalination and Water Treatment (2026)

Membrane wettability is an important factor influencing separation efficiency, fouling resistance, water flux, and durability. Although membrane wetting has been extensively studied, few reviews have quantitatively examined the relationship...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.dwt.2026.101951