Reset
Showing 20 of 397 academic articles

Study of the corrosion properties of powder rolled Ti–6Al–4V alloy applied in the biomedical implants

Mandlenkosi G.R. Mahlobo, Lethu Chikosha, Peter A. Olubambi • Journal of Materials Research and Technology (2022)

Great efforts have been made in fabricating Ti–6Al–4V alloys that can be used in the biomedical implants industry. The increasing interest in using fabricated Ti–6Al–4V alloys in industrial applications is mainly due to the properties of al...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2022.04.004

Mechanochemical Synthesis of TiO<sub>2</sub>-CeO<sub>2</sub> Mixed Oxides Utilized as a Screen-Printed Sensing Material for Oxygen Sensor

Jelena N. Stevanović, Srđan P. Petrović, Nenad B. Tadić, Katarina Cvetanović et al. • Sensors (2023)

TiO2 and CeO2 are well known as oxygen sensing materials. Despite high sensitivity, the actual utilization of these materials in gas detection remains limited. Research conducted over the last two decades has revealed synergistic effects of...

DOAJ Open Access (DOAJ) DOI: 10.3390/s23031313

Experimental studies of the influence of the characteristics of the metal bond coat on the durability of the heat-protective coating of the turbine blades of a gas turbine engine

E. V. Samoilenko, V. G. Ugreninov, V. V. Shestakov • Научный вестник МГТУ ГА (2025)

The service life of gas turbine engine (GTE) turbine blades with thermal barrier coatings (TBC) depends on many factors, including the composition, structure and properties of the metal bond coating (MB). The positive effect of using TBC is...

DOAJ Open Access (DOAJ) DOI: 10.26467/2079-0619-2025-28-5-41-49

Utilizing Waste Cotton/Pigeon Pea Stalk Fibers Composites for Enhanced Sound Absorption and Insulation in Automotive Interiors

Ariharasudhan Subramanian, Senthil Kumar Selvaraj, Rajaram Mani, Preethibha Chandrasekaran et al. • Journal of Natural Fibers (2024)

This study investigates the synthesis and characterization of composite materials, pigeon pea stem, and cotton fibers blended in different ratios such as 100/0, 70/30, 60/40, 50/50, 30/70, and 0/100. These composite materials were produced ...

DOAJ Open Access (DOAJ) DOI: 10.1080/15440478.2024.2333940

The Application of Food-Grade Chemical Treatment and Its Effect on the Mechanical Performance Characteristics of Ham Nets

Md. Al-Amin, Charles Freeman, Wes Schilling, Catherine Black et al. • Eng (2021)

This study involves the use of food-grade chemicals in the integrated pest management of dry-cured ham through the use of 100% polyester weft knitted mesh nets, an idea that was derived from a previously published study in the literature. T...

DOAJ Open Access (DOAJ) DOI: 10.3390/eng2040029

From ideation to execution: Unleashing the power of generative AI in modern digital marketing and customer engagement- A systematic literature review and case study

Sayeed Salih, Omayma Husain, Refan Mohamed Almohamedh, Hayfaa tajelsier et al. • Array (2026)

Generative Artificial Intelligence (GAI) is revolutionizing digital marketing by auto-content creation, personalized customer experience, and data-driven decisions. This study conducts a systematic literature review and case study analysis ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.array.2025.100630

Discovery of sulfone-resistant dihydropteroate synthase (DHPS) as a target enzyme for kaempferol, a natural flavanoid

Angamba Meetei Potshangbam, Ravindranath Singh Rathore, Potshangbam Nongdam • Heliyon (2020)

Kaempferol is a ubiquitous flavonoid, found in various plants having a wide range of known pharmacological activities, including antioxidant, antiinflammatory, anticancer, antiallergic, antidiabetic, neuroprotective, cardioprotective and an...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.heliyon.2020.e03378