Reset
Showing 20 of 71 academic articles

Identification and structural analysis of the interactional effect of the change drivers on the field of education

Zohre Rahsepar, Keyvan Salehi, Mitra Ezati, Mohammad Mehdi Zolfaghar Zade Kermani • فصلنامه نوآوری‌های آموزشی (2019)

Due to its wide range and importance, the education system has very important and complex elements that if we neglect to monitor their future variations, it can lead to undeniable and profound damages to the results that are expected to be ...

DOAJ Open Access (DOAJ) DOI: 10.22034/jei.2019.92888

Analysis of Sustainable Guarantee Measures of Bauxite Resource Demand in China

Chunhuan LI, Huihui LYU, Zhihua LIAO, Alin CAO • Kuangchan zonghe liyong (2024)

This is an article in the field of mining engineering. The development of aluminum industry is subject to decisive factors such as bauxite resources. As a large aluminum industry country in the world, after nearly two decades of rapid devel...

DOAJ Open Access (DOAJ) DOI: 10.3969/j.issn.1000-6532.2024.05.017

Emerging natural hemp seed proteins and their functions for nutraceutical applications

Haihong Chen, Bing Xu, Yi Wang, Wei Li et al. • Food Science and Human Wellness (2023)

With changing dietary habits and increasing awareness of the nutraceutical role of dietary foods, the demand for natural plant proteins and interest in non-traditional protein sources in the food industry are increasing. Industrial hemp, be...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.fshw.2022.10.016

Influence of chemical composition and discontinuities on energy transformation and rock mass behaviour: Insights into geological dynamic

Naeem Abbas, Kegang Li, Yewuhalashet Fissha, Zemicael Gebrehiwot et al. • The Journal of Engineering (2024)

Abstract In this study, efforts were made to incorporate the influence of discontinuities and failure modes of rock into the classification of rock masses. The past tectonic activities may create microfractures in the rock body therefore th...

DOAJ Open Access (DOAJ) DOI: 10.1049/tje2.12388

Experimental study on unloading induced shear performances of 3D saw-tooth rock fractures

Qian Yin, Xinxin Nie, Jiangyu Wu, Qi Wang et al. • International Journal of Mining Science and Technology (2023)

A fractal model governing saw-tooth fractures was first introduced to replicate sandstone samples containing an inclined 3D penetrating rough fracture surface with various joint roughness coefficients (JRC). In conventional triaxial compres...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.ijmst.2023.02.002

Environmental and Engineering Geophysics

Prem V. Sharma • Cambridge University Press eBooks (1997)

Geophysical imaging methods provide solutions to a wide range of environmental and engineering problems: protection of soil and groundwater from contamination; disposal of chemical and nuclear waste; geotechnical site testing; landslide and...

OPENALEX DOI: https://doi.org/10.1017/cbo9781139171168

Acute cognitive effects of interruptions to prolonged sitting with brief standing or physical activity breaks: a systematic review and three-level meta-analysis

Mingnan Zhuang, Mingyue Yin, Zongnan Liu, Ningkun Xiao et al. • International Journal of Behavioral Nutrition and Physical Activity (2026)

Abstract Background Prolonged sitting is strongly associated with impaired cognitive function. Although traditional exercise interventions have been shown to improve cognitive outcomes, their implementation is often limited by practical con...

DOAJ Open Access (DOAJ) DOI: 10.1186/s12966-026-01953-6

Data-Driven Cooperative Control Model of Shearer-Scraper Conveyor Based on Rough Set Theory

Shuanfeng Zhao, Jiaojiao Zhao, Jiaojiao Zhao, Zhengxiong Lu et al. • Frontiers in Energy Research (2022)

The cooperative control of shearer and scraper conveyors is the prerequisite for the realization of intelligent comprehensive mining equipment and unmanned comprehensive mining workings. However, because of the harsh working face environmen...

DOAJ Open Access (DOAJ) DOI: 10.3389/fenrg.2022.811648

Adaptive Tracking Control of Anchoring Unit for Pipeline Intelligent Plugging Robot Based on Improved Deep Deterministic Policy Gradient

Tingting Wu, Yaxin Liu, Laihe Qi, Pu Wang et al. • Machines (2026)

A pipeline intelligent plugging robot (PIPR) is an important tool in subsea pipeline maintenance and emergency repair. Precise position-tracking control is crucial for the in-pipe plugging operation of a PIPR. The anchoring module is the ke...

DOAJ Open Access (DOAJ) DOI: 10.3390/machines14060675

Influence of strain measurement methods on crack initiation and crack damage thresholds of shale

Rongchao Xu, Liang Gao, Yiding Jin, Yibo Wang et al. • Geomechanics and Geophysics for Geo-Energy and Geo-Resources (2025)

Abstract The crack initiation stress (σ ci) and crack damage stress (σ cd) are two important stress thresholds for describing the progressive failure process of rocks. Accurately obtaining these two stress thresholds is crucial for analyzin...

DOAJ Open Access (DOAJ) DOI: 10.1007/s40948-025-00940-8

Effect of fire-source location on flame behavior and temperature distribution in subway carriages with multiple lateral openings

Xinyu Wang, Guoqing Zhu, Xuyao Qi, Guowei Zhang et al. • Case Studies in Thermal Engineering (2026)

Urban rail transit has been widely adopted to alleviate surface traffic congestion. However, subway fire safety remains a critical concern because of the confined carriage space, high occupant density, and complex ventilation conditions. Mo...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.csite.2026.108501

Research on Two-Phase Flow and Wear of Inlet Pipe Induced by Fluid Prewhirl in a Centrifugal Pump

Jilong Chen, Xing Chen, Wenjin Li, Yuhai Zheng et al. • Journal of Marine Science and Engineering (2024)

In deep-sea mining hydraulic lifting systems, centrifugal pumps are very important as power units. In the process of transportation, the fluid prewhirl phenomenon in the impeller inlet will lead to changes in the state of motion of the part...

DOAJ Open Access (DOAJ) DOI: 10.3390/jmse12060950

Succinic acid Production Strategy: Raw material, Organisms and Recent Applications in pharmaceutical and Food: Critical Review

Ramzi A. Abd Alsaheb, Mohammed A. Atyia, Jaafar Kamil Abdullah, Azza Hashim Abbas • Al-Khawarizmi Engineering Journal (2023)

Succinic acid is an essential base ingredient for manufacturing various industrial chemicals. Succinic acid has been acknowledged as one of the most significant bio based building block chemicals. Rapid demand for succinic acid has been not...

DOAJ Open Access (DOAJ) DOI: 10.22153/kej.2023.01.002

Creep behaviors and constitutive model of transversely isotropic rocks

WANG Zhe-chao 1, 2, ZONG Zhi 1, QIAO Li-ping 1, 2, LI Wei1, LIU Jie 1 • Yantu gongcheng xuebao (2018)

The bedded carbonaceous slate exhibits transversely isotropic creep properties. The creep behaviors of carbonaceous slate are studied using the triaxial compressive creep tests on horizontal bedding specimens and vertical bedding specimens....

DOAJ Open Access (DOAJ) DOI: 10.11779/CJGE201807008

Impact of micromechanical properties of organic matter on the micro-mesopore structures of the over-mature shale in the Niutitang Formation

Hang Lei, Wenjibin Sun, Yujun Zuo, Zhonghu Wu et al. • Scientific Reports (2025)

Abstract The micromechanical properties of organic matter (OM) and organic pore structures in the over-mature stage are crucial for determining shale reservoir quality and assessing shale gas resource potential. However, there is still deba...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-025-89164-0

Stability Mechanism and Repair Method of U-Shaped Steel Reverse Arch Support in Soft Floor Roadway

Chao Wang, Xiaoyi Chen, Jiandong Zhang, Yongping Wu • Advances in Civil Engineering (2020)

This paper is aimed at the inverted arch support instability of track roadway with mining level +1100 m in Liuyuanzi Coal Mine. By means of field investigation, theoretical analysis, numerical calculation, and engineering practice, the inst...

DOAJ Open Access (DOAJ) DOI: 10.1155/2020/8814365

Research on automatic roadway formation and surrounding rock stability control technology by roof cutting and pressure relief in Qianyingzi Coal Mine

Aiguo SUN, Haitao LI, Xuezheng CHENG, Yi WANG et al. • Meikuang Anquan (2024)

According to the engineering geological characteristics and production technology level of Qianyingzi Coal Mine, the stability control technology of surrounding rock of the cutting roof and pressure relief roadway is proposed. For the advan...

DOAJ Open Access (DOAJ) DOI: 10.13347/j.cnki.mkaq.20231069