Home »
Academic Articles & Research Papers
Showing 20 of 200 academic articles
Wardah Naim, Trevor Tombe • The School of Public Policy Publications
(2013)
If anything is to blame for a higher dollar having negative effects on the Central Canadian manufacturing sector, you are not likely to find it in any “Dutch Disease” supposedly caused by Alberta’s oil sands. Contrary to popular belief, the...
DOAJ
Open Access (DOAJ)
Mohammadreza Sheikhattar, Hassan Yeganeh, Atefeh Farazmand • International Journal of Information and Communication Technology Research
(2025)
Production is a key component of every nation’s economy, yet the manufacturing sector faces major challenges and opportunities due to rapid digital transformation. Many companies have not fully adapted to these technological shifts, limitin...
DOAJ
Open Access (DOAJ)
Veneranda Rutainurwa, Beny Mwenda, Baraka Israel • Cogent Business & Management
(2024)
The spectacular advancement in information and communication technology (ICT) has shaped the way firms conduct their business, interact and communicate with customers and suppliers along their supply chains (SC). Yet, there exists limited k...
DOAJ
Open Access (DOAJ)
DOI: 10.1080/23311975.2024.2393235
Rafat Saleh Madani • الاكاديمي
(2026)
The contemporary designer analyzes and studies the elements of artistic heritage, to identify the intellectual and aesthetic premises that lie in its structure, its elements, its vocabulary, and its encapsulation. With the aim of enriching ...
DOAJ
Open Access (DOAJ)
DOI: 10.35560/jcofarts1765
Ehsan Vaziri Goudarzi, Mahmoud Houshmand, Omid Fatahi Valilai, Vahidreza Ghezavati et al. • PeerJ Computer Science
(2021)
Industry 4.0 is the digitalization of the manufacturing systems based on Information and Communication Technologies (ICT) for developing a manufacturing system to gain efficiency and improve productivity. Cloud Manufacturing (CM) is a parad...
DOAJ
Open Access (DOAJ)
DOI: 10.7717/peerj-cs.410
Matthias Oberreiter, Stefan Fladischer, Michael Stoschka, Martin Leitner • Metals
(2022)
An advanced lightweight design in cast aluminium alloys features complexly shaped geometries with strongly varying local casting process conditions. This affects the local microstructure in terms of porosity grade and secondary dendrite arm...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/met12050784
Jean‐Paul Rodrigue • Routledge eBooks
(2013)
Mobility is fundamental to economic and social activities such as commuting, manufacturing, or supplying energy. Each movement has an origin, a potential set of intermediate locations, a destination, and a nature which is linked with geogra...
OPENALEX
DOI: https://doi.org/10.4324/9780203371183
Sudhan Rackimuthu, Kapil Narain, Arush Lal, Faisal A. Nawaz et al. • Globalization and Health
(2022)
Abstract Background With large swathes of the world’s population—majority clustered in low- and middle-income countries—still yet to receive the minimum of two doses of the COVID-19 vaccine; The need to address the failures of international...
DOAJ
Open Access (DOAJ)
DOI: 10.1186/s12992-022-00817-5
Syed M. Hussain, Rahimah Mahat, Nek Muhammad Katbar, Imran Ullah et al. • Case Studies in Thermal Engineering
(2023)
As a result of its use in the manufacturing and construction industries, research on the flow of nanofluid is rather well-known among academics and professionals in related fields. It is helpful for electrical equipment to utilize it for co...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.csite.2023.103487
Peter Gordon Rötzel • BuR - Business Research
(2018)
Abstract In the light of the information age, information overload research in new areas (e.g., social media, virtual collaboration) rises rapidly in many fields of research in business administration with a variety of methods and subjects....
OPENALEX
cc-by
DOI: https://doi.org/10.1007/s40685-018-0069-z
Shinzo Kurita • Keiei Shigaku (Japan Business History Review)
(1974)
Six articles in this issue are papers read at the common-topics session of the ninth annual meeting of the Business History Society of Japan, held at Kobe University of Commerce on November 10 and 11, 1973.In the opening address, Kurita poi...
OPENALEX
Open Access
DOI: https://doi.org/10.5029/bhsj.9.1
ZHENG Zhong, HUANG Shi-peng, LONG Jian-yu, GAO Xiao-qiang • 工程科学学报
(2017)
Iron and steel enterprises are facing difficult problems such as increasing inventory, excess capacity, and poor profitability. It is urgent to solve them through the development of green and intelligent manufacturing technology for iron an...
DOAJ
Open Access (DOAJ)
DOI: 10.13374/j.issn2095-9389.2017.01.015
Farida Naili, Nuryakin • Engineering Management in Production and Services
(2021)
The relational capability can create networks and build relationships to be an essential part of a company to improve business performance. This study aims to empirically prove the influence of knowledge sharing on product innovation, the e...
DOAJ
Open Access (DOAJ)
DOI: 10.2478/emj-2021-0003
Le-Yan Shi, Tien-Li Chen, Chih-Hao Chen, Kun-Ching Cho • International Journal of Photoenergy
(2013)
This study intends to develop the electrolyte needed in dye-sensitized solar cells (DSSCs). Moreover, three different ionic liquids in different molalities are added to the gel-type electrolyte. Experimental results show that the DSSC compo...
DOAJ
Open Access (DOAJ)
DOI: 10.1155/2013/834184
Ibrahim Sabry, Abdel-Hamid Ismail Mourad, Mohamed ElWakil • Journal of Materials Research and Technology
(2026)
This study considers continuous-drive friction welding to compare AA6061/AA6061, AA6061/AA7075, AA6061/AA2024, and AA6061/AA5083 joints produced under the same nominal processing conditions. Optical and scanning electron microscopy, EDS, XR...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2026.09.145
CHEN Yao, XIONG Zhenghui, LUO Junwei, WANG Hanyang et al. • Journal of Aeronautical Materials
(2025)
Traditional ultrasonic automated non-destructive testing is a great challenge in the inspection of aviation components with complex surfaces. Complex surfaces can interfere with the formation of the focus in the sound beam，and the waveform ...
DOAJ
Open Access (DOAJ)
DOI: 10.11868/j.issn.1005-5053.2024.000173
Koray Özcan • Coğrafya Dergisi
(2020)
It is known that national development efforts in the foundation process of the Republic of Turkey happened within the spatial organization and functional development processes of the settlements that took place both in urban and rural conte...
DOAJ
Open Access (DOAJ)
DOI: 10.26650/JGEOG2019-0033
Cunchao Zhao, Muhammad Aaqil, Rui He, Muhammad Kamil et al. • Journal of Advanced Research
(2026)
Background: Edible and medicinal mushroom polysaccharides (EMMPs) display wide-ranging bioactivities, yet progress has been limited by siloed workflows. Extraction, structural analysis, and biological evaluation are often conducted independ...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jare.2025.12.040
M. Abdunnabi, A. Abusalama, M. Algamil, M. Almontaser • Solar Energy and Sustainable Development
(2018)
Water heating in Libyan domestic sector represents over 29% of the total electrical consumption. There is a great potential of hot water usage in the industrial and other sectors. Solar energy can play vital role in providing hot water to t...
DOAJ
Open Access (DOAJ)
Sharad Chandra Srivastava, Rohit Raja, Sanjiv Kumar Tiwari, Ritesh Kumar Singh • Directory of Open access Books (OAPEN Foundation)
(2026)
Innovative Industrial Design – Principles and Practices provides a comprehensive and contemporary overview of industrial design, emphasizing the intersection of creativity, technology, and user-centered methodologies. This edited volume exp...
OPENALEX
cc-by