Reset
Showing 9 of 9 academic articles

Thermoelectric properties of high pressure synthesized lithium and calcium double-filled CoSb3

Xiaohui Li, Yulong Kang, Chen Chen, Jianghua Li et al. • AIP Advances (2017)

Lithium and calcium are inefficient filling elements of CoSb3 at ambient pressure, but show nice filling behavior under high pressure. In this work, we synthesized Li/Ca double-filled CoSb3 with high pressure synthesis method. The products ...

DOAJ Open Access (DOAJ) DOI: 10.1063/1.4974501

Investigation of the Friction Performance of G3000 (Variant), GG20, and GG15 (High Carbon) Cast Brake Discs Using the SAE J2522 Procedure

Talha İkbal Çığır, Melih Hakan Samur, Mevlüt Yasin Igdeli • International Journal of Automotive Science and Technology (2025)

This study compares the friction performance of three commonly used cast brake disc materials in the automotive industry: the G3000 variant, GG20, and GG15 (high carbon content). Samples were tested on an inertia dynamometer following the S...

DOAJ Open Access (DOAJ) DOI: 10.30939/ijastech..1811564

Research progress in high thermal conductivity of silicon carbide matrix composites reinforced with fibers

CHEN Qiang, LI Shun, ZHU Li'an, BAI Shuxin et al. • Cailiao gongcheng (2023)

As one kind of advanced high temperature structural and functional materials, it is necessary for fiber reinforced silicon carbide matrix composites (SiC CMCs) in the field of thermal management (TM) to combine the efficient heat transfer a...

DOAJ Open Access (DOAJ) DOI: 10.11868/j.issn.1001-4381.2023.000079

High-temperature dielectric characterisation in the S-band using a solar simulator heated re-entrant microwave cavity and multiphysics modelling

Baptiste Henriot, Jesse Allens Touoyem Talla, Olivier Tantot, Nicolas Delhote et al. • Materials Research Express (2026)

This study presents a comprehensive system for the high-temperature microwave characterisation of dielectric materials. This system addresses the current scarcity of reliable dielectric data above 1000 °C, particularly under concentrated so...

DOAJ Open Access (DOAJ) DOI: 10.1088/2053-1591/ae86bb

The cause of high intensity of seismicity in Ukraine

O. Chalyi, M. Diaconescu, I. Gurova, Y. Lisovyi et al. • Вісник Київського національного університету імені Тараса Шевченка. Серія Геологія (2018)

In the article, the earthquake near Sumy is considered in detail. According to the authors, this earthquake occurred under the influence of several stress regimes. At the regional level: it is related to the transfer of stresses from the Vr...

DOAJ Open Access (DOAJ) DOI: 10.17721/1728-2713.83.05

Effect of chemical treatment on the mechanical and thermal performance of flax fiber reinforced aluminium 6082 laminate: a machine learning-enhanced investigation

M. Vinod, B. S. Nithyananda, Shrishail B. Sollapur, Satish Gajbhiv et al. • Scientific Reports (2026)

Abstract This work examined the role of alkaline and epoxy-based surface chemical treatments on the mechanical and thermal properties of flax fiber reinforced Aluminum Alloy 6082 hybrid Fiber Metal Laminates (FMLs), integrated with machine ...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-026-58852-w

Efficient thermal dissipation in wafer-scale heterogeneous integration of single-crystalline β-Ga2O3 thin film on SiC

Wenhui Xu, Tiangui You, Yibo Wang, Zhenghao Shen et al. • Fundamental Research (2021)

The semiconductor, β-Ga2O3 is attractive for applications in high power electronic devices with low conduction loss due to its ultra-wide bandgap (∼4.9 eV) and large Baliga's figure of merit. However, the thermal conductivity of β-Ga2O3 is ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.fmre.2021.11.003

Tailoring structural properties of carbon via implanting optimal co nanoparticles in n‐rich carbon cages toward high‐efficiency oxygen electrocatalysis for rechargeable zn‐air batteries

Jie Yu, Yawen Dai, Zhenbao Zhang, Tong Liu et al. • Carbon Energy (2022)

Abstract Rational construction of carbon‐based materials with high‐efficiency bifunctionality and low cost as the substitute of precious metal catalyst shows a highly practical value for rechargeable Zn‐air batteries (ZABs) yet it still rem...

DOAJ Open Access (DOAJ) DOI: 10.1002/cey2.171

Achieving high thermal conductivity of Al–50Si alloy through heat treatment and its microstructural evolution

Chao Ding, Huali Hao, Rui Ma, Changqing Ye et al. • Journal of Materials Research and Technology (2023)

Al–50Si alloys were prepared by powder extrusion and characterized for electronic packaging. The optimization of powder size, extrusion temperature, and heat treatment parameters was performed to enhance the microstructure and thermo-physic...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2023.11.038