Home »
Academic Articles & Research Papers
Showing 13 of 13 academic articles
Naeem Abbas, Kegang Li, Yewuhalashet Fissha, Zemicael Gebrehiwot et al. • The Journal of Engineering
(2024)
Abstract In this study, efforts were made to incorporate the influence of discontinuities and failure modes of rock into the classification of rock masses. The past tectonic activities may create microfractures in the rock body therefore th...
DOAJ
Open Access (DOAJ)
DOI: 10.1049/tje2.12388
Komissarchuk Olga, Xu Zhengbin, Hao Hai • China Foundry
(2014)
Porous aluminum alloys produced by the metal-gas eutectic method or GASAR process need to be performed under a certain pressure of hydrogen, and to carry over melt to a tailor-made apparatus that ensures directional solidification. Hydrogen...
DOAJ
Open Access (DOAJ)
Spyridoula G. Farmaki, Dimitrios A. Exarchos, Vasileios Dracopoulos, Anastasios Gkotzamanis et al. • Applied Mechanics
(2026)
Recent advances in nanotechnology have highlighted the transformative potential of carbon-based nanomaterials, such as carbon nanofibers, carbon nanotubes, and graphene, in cementitious systems. These materials have shown a remarkable abili...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/applmech7010013
Linlin Lu, Lecai Liang • Energy Science & Engineering
(2021)
Abstract Buried oil and gas pipelines may face the threat of geological disasters such as landslides, faults, and floods. However, long‐term buried oil and gas pipelines often have corrosion defects, which bring greater challenges to the sa...
DOAJ
Open Access (DOAJ)
DOI: 10.1002/ese3.830
Longping Yan, Muwang Wei, Lei Huang, Huawei Li et al. • KSCE Journal of Civil Engineering
(2026)
This review systematically examines the role of bamboo fiber (BF) in enhancing the performance of cement-based composites, with a particular focus on workability, mechanical properties, durability, and sustainability. BF, as a renewable and...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.kscej.2026.100676
A. U. Adebanjo, B. I. O. Dahunsi, J. O. Labiran • Nigerian Journal of Technological Development
(2021)
In this study, locally produced Metakaolin (MK) was used as an admixture in recycled aggregate concrete of grades M 25 and M 30. The content of MK varied from 0-15% at 5% intervals. The physical and mechanical properties (bulk density, spec...
DOAJ
Open Access (DOAJ)
Ayenew Amare, Mezigebu Belay, Zewudu Wondimagegn • Journal of Materials Science: Materials in Engineering
(2026)
Abstract The use of aluminium matrix composites (AMCs) in advanced engineering applications has increased due to their improved mechanical properties, such as hardness, ultimate tensile strength, toughness, wear, and corrosion resistance. A...
DOAJ
Open Access (DOAJ)
DOI: 10.1186/s40712-026-00421-0
Guo-qiang Xu, Wei Zhang, Si Chen, Zhen-kai Zhu et al. • Case Studies in Construction Materials
(2024)
To investigate the impact of sulfate corrosion on the performance of shaft lining concrete under sustained compressive loads, this study immersed samples in a 10 % sodium sulfate solution after subjecting to sustained compressive loads of 0...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.cscm.2024.e03657
Yaser Pourmazaheri, Hamid Soltanian • Journal of Petroleum Science and Technology
(2015)
The design of cement slurry for horizontal wellbores is challenging as it must present very high quality cement slurry properties e.g. zero free water, less than 50 cc API fluid loss value, appropriate rheology and yield point for effective...
DOAJ
Open Access (DOAJ)
DOI: 10.22078/jpst.2015.504
B. Oleksiak, M. Kozioł, J. Wieczorek, M. Krupa et al. • Metalurgija
(2015)
In the present paper, results of the research on application of residual fine-grained, carbon-bearing materials as coke substitutes in the shaft process of copper matter smelting are discussed. The addition was introduced into the charge as...
DOAJ
Open Access (DOAJ)
Guledagudd Chaitali B., Praveen Kannam, Kulkarni Vinayak N. • Journal of the Mechanical Behavior of Materials
(2026)
Lightweight aggregate concrete (LWAC) incorporating pumice aggregates offers a sustainable alternative to conventional concrete, enabling a reduced self-weight while maintaining adequate strength and stiffness for structural applications. T...
DOAJ
Open Access (DOAJ)
DOI: 10.1515/jmbm-2025-0113
William D. Callister, David G. Rethwisch (2007)
Chapter 1 - Introduction. 1.1 Historical Perspective 1.2 Materials Science and Engineering 1.3 Why Study Materials Science and Engineering? 1.4 Classification of Materials Materials of Importance-Carbonated Beverage Containers 1.5 Advanced ...
OPENALEX
Da Yuan, Dong Huang, Yu Lei, Minhao Wang et al. • Applied Sciences
(2026)
The penetration rate (PR) is a critical indicator affecting the safety and cost of shield tunnel construction. However, due to the complexity of geological conditions and the nonlinear nature of tunneling parameters, traditional prediction ...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/app16115549