Home »
Academic Articles & Research Papers
Showing 20 of 25 academic articles
Ariharasudhan Subramanian, Senthil Kumar Selvaraj, Rajaram Mani, Preethibha Chandrasekaran et al. • Journal of Natural Fibers
(2024)
This study investigates the synthesis and characterization of composite materials, pigeon pea stem, and cotton fibers blended in different ratios such as 100/0, 70/30, 60/40, 50/50, 30/70, and 0/100. These composite materials were produced ...
DOAJ
Open Access (DOAJ)
DOI: 10.1080/15440478.2024.2333940
Zunyu Liu, Chaoyu Zhao, Shuangfeng Jia, Weiwei Meng et al. • Frontiers of Optoelectronics
(2023)
Abstract Multi-dimensional heterojunction materials have attracted much attention due to their intriguing properties, such as high efficiency, wide band gap regulation, low dimensional limitation, versatility and scalability. To further imp...
DOAJ
Open Access (DOAJ)
DOI: 10.1007/s12200-023-00091-2
A.V. LYULKO, V.V. GRITSENKO, B.B. JMAILOV, V.G. LYULKO • Вестник Донского государственного технического университета
(2018)
The basic stages of a complex development direction of a science and practice of powder metallurgy as method of information-analytical representation of its basic aspects are presented. The basic algorithm of carrying out of operations and ...
DOAJ
Open Access (DOAJ)
CA (United States) Lawrence Livermore National Lab., D Lesuer, USDOE, Washington, DC (United States) (1997)
During FY-96, work within the Materials Science and Engineering Thrust Area was focused on material modeling. Our motivation for this work is to develop the capability to study the structural response of materials as well as material proces...
OPENALEX
Open Access
DOI: https://doi.org/10.2172/623044
William F. Smith • Journal of International Crisis and Risk Communication Research
(1986)
This book attempts to provide basic knowledge about the structure, properties, and processing of engineering materials and their applications. The first chapter gives an introduction to materials science and engineering and briefly describe...
OPENALEX
Open Access
ZHU Hongye, WANG Xiaoxu, LYU Jixiang, HAO Shulei • Xi'an Gongcheng Daxue xuebao
(2025)
To study the influence of edge effects on the resin filling flow pattern in the RTM process of composite materials, the finite element software PAM-RTM was used to simulate and analyze the impregnation process of the blade preforms in RTM.B...
DOAJ
Open Access (DOAJ)
DOI: 10.13338/j.issn.1674-649x.2025.04.002
Aminat Mohammed Ahmed, Menbere Leul Mekonnen, Kebede Nigussie Mekonnen • Carbohydrate Polymer Technologies and Applications
(2023)
Nutrient enrichment of the aquatic system promotes eutrophication, which degrades the aesthetic and economic value of water systems. On the other hand, the global supply of nutrients such as phosphate is dwindling. Hence, from the viewpoint...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.carpta.2023.100386
• Materials Today
(2003)
By taking a new approach and focusing on functional applications, Deborah Chung gives an interesting account of what composite materials can do and achieve, says Yiu-Wing Mai....
OPENALEX
cc-by-nc-nd
DOI: https://doi.org/10.1016/s1369-7021(03)00928-3
Noela Rodriguez-Losada, Noela Rodriguez-Losada, Rune Wendelbob, M. Carmen Ocaña et al. • Frontiers in Neuroscience
(2020)
Emerging scaffold structures made of carbon nanomaterials, such as graphene oxide (GO) have shown efficient bioconjugation with common biomolecules. Previous studies described that GO promotes the differentiation of neural stem cells and ma...
DOAJ
Open Access (DOAJ)
DOI: 10.3389/fnins.2020.570409
Soo-Lim Lee, Bong-Ju Kim, Seon-Bong Lee • Machines
(2022)
There is an increasing need for securing development technology for suitable materials to obtain more productive and lightweight automobile parts, including hydrogen fuel cell stack enclosures. Due to the poor moldability of Poly-Phenylene ...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/machines10080625
Isabel Pombo Cardoso • Conservar Património
(2019)
This paper is the fifth of a series and focuses on tracing the history of the use of gypsum based products as well as of the use of ground layers, centred on a review of published analytical evidence. The purpose is to contribute for the un...
DOAJ
Open Access (DOAJ)
DOI: 10.14568/cp2018033
Guoping Ding, Yixuan Zhang, Yong Zhu • Advanced Composites Letters
(2019)
The advantages of carbon fiber-reinforced plastic (CFRP) box girders include good bending resistance, lightweight and high strength. Therefore, they are widely used in aerospace, rail transit, and other fields. When the CFRP box girder is s...
DOAJ
Open Access (DOAJ)
DOI: 10.1177/2633366X19891171
Kunpeng Liu, Haitao Gong, Binbin Jiao, Zhenshan Ding et al. • Advanced NanoBiomed Research
(2024)
This study aims to evaluate the therapeutic potential of cationic liposomal neostigmine bromide (NB), a novel drug delivery system, for the treatment of detrusor underactivity. By comparing the characteristics of NB‐liposomes (NLP), NB‐β‐cy...
DOAJ
Open Access (DOAJ)
DOI: 10.1002/anbr.202300109
Galina Mikhaylovna Danilova-Volkovskaya, Alexander Arkadyevitch Begak • Современная наука и инновации
(2022)
This paper presents the investigations of innovation nanocomposite material to increase structural strength, reduce weight and provide radio transparency in unmanned aircraft vehicles. The method of the of creation of polymer nanocomposite ...
DOAJ
Open Access (DOAJ)
Fathei Nouh, Omayma El kady, Sabry abdel aziz • International Journal of Industry and Sustainable Development
(2024)
This research addresses the urgent challenges facing the materials and metallurgical industries, driving manufacturers to seek innovative solutions for material recycling. Aluminum scrape in used to manufacture a composite material with a h...
DOAJ
Open Access (DOAJ)
DOI: 10.21608/ijisd.2024.302067.1074
Zaika Yulvi, Charisma Nuril, Leta Milleila Nursanti Luh • E3S Web of Conferences
(2023)
As a foundation for transportation infrastructure, soft ground has limited bearing capacity and high compression. To prevent embankment failure, lightweight material is suggested. In the construction of road embankments, EPS can be regarded...
DOAJ
Open Access (DOAJ)
DOI: 10.1051/e3sconf/202346408001
(2025)
Materials science has always occupied an extremely high position in the human development process. As we explore the oceans of stars, various industries have put forward more stringent requirements for the performance of materials, forcing ...
OPENALEX
DOI: https://doi.org/10.5772/intechopen.1002828
William F. Smith (1993)
1 Introduction to Materials Science and Engineering 2 Atomic Structure and Bonding 3 Crystal and Amorphous Structures in Materials 4 Solidification, Crystalline Imperfections 5 Thermally Activated Processes and Diffusion in Solids 6 Mechani...
OPENALEX
Publisher Kunderi Mahaboob • ADVANCED SCIENCES INDEX
(2014)
The Journal of Materials Science and Engineering is an international, scholarly, and peer-reviewed journal (print and online) published monthly by David Publishing Company, USA which was founded in 2007. It provides an international medium ...
OPENALEX
A. K. Kodeary, S. M. Hamidi • Journal of Nanotechnology
(2019)
We report an experimental study on the piezophotonic effect of gold and lead zirconate titanate (PbZrTiO3) nanoparticles (NPs) and also their core-shell nanostructures prepared by the laser ablation in liquid method. To obtain these NPs and...
DOAJ
Open Access (DOAJ)
DOI: 10.1155/2019/6046079