Home »
Academic Articles & Research Papers
Showing 20 of 26 academic articles
Daugherty KE, Martin LD, Leach-Baughman M, Edmonds KL et al. • RSC advances
(2026)
PMC
PMC Public Access (View-Only)
DOI: 10.1039/d6ra07687d
PMC: PMC13682590
Chunhuan LI, Huihui LYU, Zhihua LIAO, Alin CAO • Kuangchan zonghe liyong
(2024)
This is an article in the field of mining engineering. The development of aluminum industry is subject to decisive factors such as bauxite resources. As a large aluminum industry country in the world, after nearly two decades of rapid devel...
DOAJ
Open Access (DOAJ)
DOI: 10.3969/j.issn.1000-6532.2024.05.017
Ibrahim Sabry, Abdel-Hamid Ismail Mourad, Mohamed ElWakil • Journal of Materials Research and Technology
(2026)
This study considers continuous-drive friction welding to compare AA6061/AA6061, AA6061/AA7075, AA6061/AA2024, and AA6061/AA5083 joints produced under the same nominal processing conditions. Optical and scanning electron microscopy, EDS, XR...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2026.09.145
Yunlong Ding, Jialian Shi, Dongying Ju • Advances in Materials Science and Engineering
(2019)
In this study, magnesium alloy AZ91, which was cast by double roll casting system, was rolled by a rolling mill. Then, rolled magnesium alloy and magnesium alloy without being rolled were, respectively, welded with aluminum alloy 6061 by di...
DOAJ
Open Access (DOAJ)
DOI: 10.1155/2019/4535984
Han Yuyin, Ding Dongyan, Du Jiandi, Gao Yongjin • 上海师范大学学报. 自然科学版
(2017)
Optimizing alloy composition is an effective way to improve physical and chemical properties of automobile heat exchanger materials.A Sm-containing Al-Mn-Si-Fe-Cu alloy was investigated through transmission electron microscopy,scanning elec...
DOAJ
Open Access (DOAJ)
DOI: 10.3969/J.ISSN.1000-5137.2017.06.006
Komissarchuk Olga, Xu Zhengbin, Hao Hai • China Foundry
(2014)
Porous aluminum alloys produced by the metal-gas eutectic method or GASAR process need to be performed under a certain pressure of hydrogen, and to carry over melt to a tailor-made apparatus that ensures directional solidification. Hydrogen...
DOAJ
Open Access (DOAJ)
Paulo Douglas S. de Vasconcelos, André L. Amarante Mesquita • International Journal of Engineering Business Management
(2011)
Fluidization is an engineering unit operation that occurs when a fluid (liquid or gas) ascends through a bed of particles, and these particles get a velocity of minimum fluidization V mf enough to stay in suspension, but without carrying th...
DOAJ
Open Access (DOAJ)
DOI: 10.5772/50943
Baigang Mi, Hao Zhan • IEEE Access
(2019)
By considering the exclusion characteristics of foreign objects in a new intake system with a bypass duct for turboprop engines, two kinds of common rigid foreign objects, the grains, and metal pieces, are modeled based on airworthiness sta...
DOAJ
Open Access (DOAJ)
DOI: 10.1109/ACCESS.2019.2916551
Sung-Sook Choi, Jae-Eun Lee, Hyo-Jun Lee, Kyung-Ae Lee • Foods
(2025)
Carrot (Daucus carota L.) is a widely consumed root vegetable, yet its aerial parts, including leaves and stems, are typically discarded as agricultural by-products, despite their potential biological value. This study comparatively evaluat...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/foods14233993
• Chemical & Engineering News
(1958)
A FULLY EQUIPPED ATOMIC LABORATORY with instructions and experiments make up Nuclear-Chicago's new "packaged" nuclear engineering program for coDeges. First reactor from its production line will be installed at Northwestern University, Evan...
OPENALEX
DOI: https://doi.org/10.1021/cen-v036n001.p108
Maribel Hernández, Ricardo R. Ambriz, Christian García, David Jaramillo • Metals
(2020)
The gas metal arc welding (GMAW) process was used to weld 3003-H14 plates under restricted and unrestricted thermal expansion. Experimental and numerical analysis were conducted to determine the relation between weld thermal cycles and resi...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/met10060708
Chang Gu, Ruizhuo Liu, Chengduo Wang, Yufu Sun et al. • Metals
(2020)
The ZG40Cr20Ni20Alx (x = 0, 1.76, 3.45, and 5.34) heat-resistant steel has been newly developed on the basis of HK40 steel for aggressive oxidizing environments. The results reveal that the Al greatly enhances the oxidation resistance of ZG...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/met10020176
Tanimu Kogi Ibrahim, Danjuma Saleh Yawas, Julius Thaddaeus, Bashar Danasabe et al. • Scientific Reports
(2024)
Abstract This study focuses on optimizing double stir casting process parameters to enhance the tensile strength of hybrid composites comprising aluminum alloy, brown pumice, and coal ash, intended for brake disc applications. Analytical te...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41598-024-67476-x
Alcides Nóbrega Sial, Jiubin Chen, Christoph Korte, Manoj Kumar Pandit et al. • Frontiers in Earth Science
(2021)
High-resolution organic carbon isotope (δ13C), Hg concentration and Hg isotopes curves are presented for the Permian-Triassic boundary (PTB) sections at Guryul Ravine (India) and Meishan D (China). The total organic carbon (TOC)-normalized ...
DOAJ
Open Access (DOAJ)
DOI: 10.3389/feart.2021.651224
Aditya Apriawan Saputra • J@ti Undip: Jurnal Teknik Industri
(2025)
Penelitian ini dilatarbelakangi oleh tingginya angka cacat produksi aluminium collapsible tube khususnya pada produk Kloderma 0.05% gel 5 gram Ø13,4 x 90 mm di PT. Tamanaco. Pada semester kedua tahun 2023, tingkat defect mencapai 8,81% (1.2...
DOAJ
Open Access (DOAJ)
DOI: 10.14710/jati.20.2.42-68
Stefano Fratini, Fabrizio Maria Francesconi, Roberto Checcucci, Francesco Frondini et al. • Acque Sotterranee
(2013)
In December 2009 and the first months of 2010, a large water crisis took place in the Orvieto area, because of sudden high concentration of aluminum (Al) in the groundwater of the vulsino aquifer. This represents a supply for Orvieto’s popu...
DOAJ
Open Access (DOAJ)
DOI: 10.7343/as-048-13-0075
M. Vinod, B. S. Nithyananda, Shrishail B. Sollapur, Satish Gajbhiv et al. • Scientific Reports
(2026)
Abstract This work examined the role of alkaline and epoxy-based surface chemical treatments on the mechanical and thermal properties of flax fiber reinforced Aluminum Alloy 6082 hybrid Fiber Metal Laminates (FMLs), integrated with machine ...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41598-026-58852-w
Fathei Nouh, Omayma El kady, Sabry abdel aziz • International Journal of Industry and Sustainable Development
(2024)
This research addresses the urgent challenges facing the materials and metallurgical industries, driving manufacturers to seek innovative solutions for material recycling. Aluminum scrape in used to manufacture a composite material with a h...
DOAJ
Open Access (DOAJ)
DOI: 10.21608/ijisd.2024.302067.1074
Minglong Kang, Li Zhou, Yunlai Deng, Jinqin Lei • Advances in Materials Science and Engineering
(2021)
Multilayer brazeable aluminum alloy sheet is prone to collapse during high-temperature brazing process. The sagging resistance of the aluminum composite sheet needs to be further improved for quality control. Effects of annealing and rate o...
DOAJ
Open Access (DOAJ)
DOI: 10.1155/2021/6625548
William D. Callister, David G. Rethwisch (2007)
Chapter 1 - Introduction. 1.1 Historical Perspective 1.2 Materials Science and Engineering 1.3 Why Study Materials Science and Engineering? 1.4 Classification of Materials Materials of Importance-Carbonated Beverage Containers 1.5 Advanced ...
OPENALEX