Reset
Showing 9 of 9 academic articles

The Application of Food-Grade Chemical Treatment and Its Effect on the Mechanical Performance Characteristics of Ham Nets

Md. Al-Amin, Charles Freeman, Wes Schilling, Catherine Black et al. • Eng (2021)

This study involves the use of food-grade chemicals in the integrated pest management of dry-cured ham through the use of 100% polyester weft knitted mesh nets, an idea that was derived from a previously published study in the literature. T...

DOAJ Open Access (DOAJ) DOI: 10.3390/eng2040029

Analysis of Mangrove Density Levels Change Based on Cloud Computing on Abrasion Area in the Coast of Semarang City

Wahid Akhsin Budi Nur Sidiq, Tjaturahono Budi Sanjoto, Nasir Nayan, Sriyanto et al. • Geosfera Indonesia (2025)

The coastal areas of Semarang City have experienced land conversion due to development activities that threaten mangrove sustainability in recent years. The urgency of this research is the need to monitor mangrove density levels to be used ...

DOAJ Open Access (DOAJ) DOI: 10.19184/geosi.v10i1.48079

One-step fabrication of superhydrophobic fabrics with stable mechanical performance in harsh conditions

Zhuoxing Liu, Kexin Zhao, Jie Ma, Shijie Liu et al. • Nature Communications (2026)

Abstract Developing robust water-repellent textiles is critical for outdoor, protective, and industrial applications. However, achieving long-lasting water repellency under mechanical stress remains a significant challenge. Conventional app...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41467-026-70857-7

Hybrid coatings for orthopaedic implants formed by physical vapour deposition and microarc oxidation

Roman Gabor, Ladislav Cvrček, Martina Doubková, Václav Nehasil et al. • Materials & Design (2022)

This study is focused on the preparation of new hybrid layers intended for surface modification of Ti-6Al-4V alloys for potential orthopaedic and dental applications. Combination of the technology of physical vapour deposition (PVD) and sub...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.matdes.2022.110811

Characterizing particle crushing behavior of dry granular soils by acoustic emission

Wenli Lin, Shuyu Tian, Deqi He, Xiao Kang et al. • Journal of Rock Mechanics and Geotechnical Engineering (2026)

This study investigates particle crushing mechanisms in granular soils during shearing through staged triaxial compression experiments performed at prescribed axial strains and varying confining stresses, integrating a high-performance acou...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jrmge.2025.07.039

REVIEW OF MODERN APPROACHES TO DENTAL FLUOROSIS MANAGEMENT

L.F. Kaskova, N.A. Morhun, L.I. Amosova, N.V. Yanko et al. • Український стоматологічний альманах (2019)

Dental fluorosis is caused by ingesting too much fluoride while the teeth are developing. Poltava region belongs to Buchach fluorine hydrogeological province which ground waters are characterized by a high content of fluorine. Such district...

DOAJ Open Access (DOAJ) DOI: 10.31718/2409-0255.3.2019.11

Artificial Tears: A Systematic Review

Semp DA, Beeson D, Sheppard AL, Dutta D et al. • Clinical Optometry (2023)

David A Semp, Danielle Beeson, Amy L Sheppard, Debarun Dutta, James S Wolffsohn School of Optometry, College of Health and Life Sciences, Aston University, Birmingham, UKCorrespondence: James S Wolffsohn, Tel +44 121 2044140, Email j.s.w.wo...

DOAJ Open Access (DOAJ)

TEMPERATURE OF SLIDING SURFACES OF INTERNAL COMBUSION ENGINES BY THE TEMPER COLORS OF WEAR PARTICLES

M. G. El-Sherbiny, Farouk Hammad, M. M. Youssef, M. K. Mohamed et al. • Journal of the Egyptian Society of Tribology (2026)

The present study examines the temper colors of the wear particles retained by the oil filter by optical microscope. The temperature of the sliding surfaces inside engines can be determined by the temper colors of the wear particles. Becaus...

DOAJ Open Access (DOAJ) DOI: 10.21608/jest.2026.481011.1158

Washability and abrasion resistance of illuminative knitted e-textiles with POFs and silver-coated conductive yarns

Ngan Yi Kitty Lam, Jeanne Tan, Anne Toomey, Ka Chun Jimmy Cheuk • Fashion and Textiles (2022)

Abstract For the integration of conductive yarns in e-textiles, knitting offers structural versatility and malleability for wider product applications in the contexts of wearables and interiors. To enable mass adoption of conductive materia...

DOAJ Open Access (DOAJ) DOI: 10.1186/s40691-022-00313-9