Reset
Showing 16 of 16 academic articles

Experimental studies of the influence of the characteristics of the metal bond coat on the durability of the heat-protective coating of the turbine blades of a gas turbine engine

E. V. Samoilenko, V. G. Ugreninov, V. V. Shestakov • Научный вестник МГТУ ГА (2025)

The service life of gas turbine engine (GTE) turbine blades with thermal barrier coatings (TBC) depends on many factors, including the composition, structure and properties of the metal bond coating (MB). The positive effect of using TBC is...

DOAJ Open Access (DOAJ) DOI: 10.26467/2079-0619-2025-28-5-41-49

Utilizing Waste Cotton/Pigeon Pea Stalk Fibers Composites for Enhanced Sound Absorption and Insulation in Automotive Interiors

Ariharasudhan Subramanian, Senthil Kumar Selvaraj, Rajaram Mani, Preethibha Chandrasekaran et al. • Journal of Natural Fibers (2024)

This study investigates the synthesis and characterization of composite materials, pigeon pea stem, and cotton fibers blended in different ratios such as 100/0, 70/30, 60/40, 50/50, 30/70, and 0/100. These composite materials were produced ...

DOAJ Open Access (DOAJ) DOI: 10.1080/15440478.2024.2333940

Experimental study on start-up and steady-state heat transfer performance of heat pipe with liquid bypass line for accelerating working fluid

Youngmi Baek, Euiguk Jung • Case Studies in Thermal Engineering (2022)

This study investigates the start-up and steady-state heat transfer performance of a heat pipe with a bypass line for accelerating a working fluid. The interface resistance by the counterflow of vapor and liquid under the operation of a hea...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.csite.2021.101708

Effect of Ageing on a Novel Cobalt-Free Precipitation-Hardenable Martensitic Alloy Produced by SLM: Mechanical, Tribological and Corrosion Behaviour

Inés Pérez-Gonzalo, Florentino Alvarez-Antolin, Alejandro González-Pociño, Luis Borja Peral-Martinez • Journal of Manufacturing and Materials Processing (2025)

This study investigates the mechanical, tribological, and electrochemical behaviour of a novel precipitation-hardenable martensitic alloy produced by selective laser melting (SLM). The alloy was specifically engineered with an optimised com...

DOAJ Open Access (DOAJ) DOI: 10.3390/jmmp9080261

The effect of freeze-thaw cycles on the frost resistance of energy tunnels in cold regions

Yue Guo, Chenglong Wang, Abdelmalek Bouazza, Xuanming Ding et al. • Case Studies in Thermal Engineering (2026)

Seasonal temperature fluctuations in cold regions induce freeze–thaw cycles that can significantly impact the structural safety and maintenance of tunnels. This study uses the Daban Mountain Tunnel as a case study to develop a full-scale nu...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.csite.2026.108518

Design, manufacturing, and performance evaluation of heat pipe with three-segmented composite wick structure

Jiu Yu, Yubo Hu, Yaoxing Peng • Case Studies in Thermal Engineering (2026)

The wick structure functions as a core component for heat pipe (HP) and stands as one of the critical factors that dictate the performance of HP. Consequently, this paper puts forward an three-segmented composite wick structure, which is ma...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.csite.2026.107724

Research progress in high thermal conductivity of silicon carbide matrix composites reinforced with fibers

CHEN Qiang, LI Shun, ZHU Li'an, BAI Shuxin et al. • Cailiao gongcheng (2023)

As one kind of advanced high temperature structural and functional materials, it is necessary for fiber reinforced silicon carbide matrix composites (SiC CMCs) in the field of thermal management (TM) to combine the efficient heat transfer a...

DOAJ Open Access (DOAJ) DOI: 10.11868/j.issn.1001-4381.2023.000079

Laboratorul de cercetare şi încercări higrotermice, instrument de verificare experimentală a calităţii construcţiilor, echipamentelor şi gestionării eficiente a energiei

Constantin Bogos, Constantin Miron • Urbanism. Arhitectura. Constructii (2010)

This paper seeks to present the technical conditions and the main types of research and experimental verifications being conducted by the Laboratory of Research and Hygrothermal Testing for Materials, Building Elements and Parts at INCD URB...

DOAJ Open Access (DOAJ)

Isolation, characterization, and genomic analysis of a novel phage WSPA with lytic activity against Serratia marcescens

Lijuan Li, Kunkun Li, Yu Mi, Xiumei Wu et al. • Microbiology Spectrum (2025)

ABSTRACT Serratia marcescens is an established pathogen implicated in hospital-acquired infections and is notorious for its propensity to form biofilms on medical devices, leading to persistent environmental contamination and increased infe...

DOAJ Open Access (DOAJ) DOI: 10.1128/spectrum.02716-24

Improvement of Cycling Stability of Core–Shell Structured Ni-Rich NMC Cathodes by Using a Tungsten Oxide Stabilization Interlayer

Bilal Tasdemir, Svitlana Krüger, Pinank Sohagiya, Apurba Ray et al. • Batteries (2026)

The growing demand for higher-energy lithium-ion batteries, encompassing consumer electronics, stationary grid storage, and electric mobility to specialized sectors like aerospace, medical devices, and industrial robotics, requires cathode ...

DOAJ Open Access (DOAJ) DOI: 10.3390/batteries12030082

Efficient thermal dissipation in wafer-scale heterogeneous integration of single-crystalline β-Ga2O3 thin film on SiC

Wenhui Xu, Tiangui You, Yibo Wang, Zhenghao Shen et al. • Fundamental Research (2021)

The semiconductor, β-Ga2O3 is attractive for applications in high power electronic devices with low conduction loss due to its ultra-wide bandgap (∼4.9 eV) and large Baliga's figure of merit. However, the thermal conductivity of β-Ga2O3 is ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.fmre.2021.11.003

From Isolation to Application: Utilising Phage‐Antibiotic Synergy in Murine Bacteremia Model to Combat Multidrug‐Resistant Enterococcus faecalis

Fatma Al‐zahraa A. Yehia, Galal Yahya, Eslam M. Elsayed, Javier Serrania et al. • Microbial Biotechnology (2025)

ABSTRACT Enterococcus species, natural inhabitants of the human gut, have become major causes of life‐threatening bloodstream infections (BSIs) and the third most frequent cause of hospital‐acquired bacteremia. The rise of high‐level gentam...

DOAJ Open Access (DOAJ) DOI: 10.1111/1751-7915.70075

An intelligent machine learning paradigm for gyrotactic micro-organism-induced squeezing flow of Eyring–Powell hybrid nanofluids with entropy generation

A. Imran, Muna Elsadig, Jongsuk Ro • AIP Advances (2026)

A novel unsteady squeezing flow of a non-Newtonian ternary hybrid nanofluid is investigated by focusing Eyring–Powell fluid rheology in an infinite channel. The nanofluid consists of AA1072, AA1075, and ZrO2 nanoparticles suspended in blood...

DOAJ Open Access (DOAJ) DOI: 10.1063/5.0337148

Record‐High Latent Heat, Ultra‐Fast Relaxation and Closed‐Loop Recycling Double‐Brush Polymer Networks for Self‐Adaptive Thermal Interface Management

Qiguang Liu, Yanyun Li, Zhenghao Wu, Junjie Cheng et al. • Advanced Science (2026)

ABSTRACT In the era of artificial intelligence (AI)‐driven high‐performance computing, phase change materials (PCMs) are critical for high‐flux thermal management. PCMs are evolving toward high enthalpy, low interfacial thermal resistance (...

DOAJ Open Access (DOAJ) DOI: 10.1002/advs.202521482