Reset
Showing 20 of 95 academic articles

Modular multi-fidelity simulation framework for advanced sail-driven spacecraft control and dynamics in perturbation-rich regimes

Celia Redondo-Verdú, Álvaro Belmonte-Baeza, José L. Ramón, Cristina Cachero et al. • Results in Engineering (2026)

This work presents a high-fidelity Software-in-the-Loop (SIL) simulation framework for the development and validation of control strategies for sail-driven spacecraft operating in Low Earth Orbit (LEO). The framework integrates NVIDIA Omniv...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.rineng.2026.113314

Non- Linear FE Modeling of Two-Way Reinforced Concrete Slab of NSC, HSC and LWC under Concentrated Load

Shatha S. Kareem, Shaimaa T. Sakin, Mohammad Z. Yousif • Journal of Engineering and Sustainable Development (2013)

This paper presents the numerical study to simulate the behavior six specimens of two-way RC slab of normal strength concrete (NSC), high strength concrete (HSC) and light weight concrete (LWC) with two steel ratio of 0.005 and 0.002 under ...

DOAJ Open Access (DOAJ)

Grain boundary and texture evolution of TiB/Ti–2Al–6Sn titanium matrix composite under electroshocking treatment

Yaya Wu, Yan Wen, Anan Guo, Jian Zhou et al. • Journal of Materials Research and Technology (2023)

This work used electroshocking treatment (EST) plus external loading to regulate the microstructure of titanium matrix composites (TMCs). The external loading was 0.3 MPa. After EST plus external loading with 0.3 MPa, the α was reduced to 2...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2023.10.177

Flexural Behaviour of Corroded RC Beams Strengthened with CFRCM: Refined Modelling, Parametric Analysis, and Design Assessment

Chaoqun Zeng, Jing-Pu Tang, Liangliang Wei, Miaochang Zhu et al. • Buildings (2026)

Reinforced concrete (RC) beams strengthened with carbon-fabric-reinforced cementitious matrix (CFRCM) systems have shown potential for restoring flexural performance, yet their effectiveness under different corrosion levels remains insuffic...

DOAJ Open Access (DOAJ) DOI: 10.3390/buildings16020377

Structural performance of FRP composite bars reinforced rubberized concrete compressive members: Tests and numerical modeling

Ali Raza, Khaled Mohamed Elhadi, Muhammad Abid, Ahmed Farouk Deifalla et al. • Heliyon (2024)

Waste tyre rubber has become an environmental and health concern that needs to be sustainably managed to avoid fire hazards and save natural resources. This research work aims to study the structural behavior of glass fiber reinforced polym...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.heliyon.2024.e26222

The Digital Transformation in Health: How AI Can Improve the Performance of Health Systems

África Periáñez, Ana Fernández Del Río, Ivan Nazarov, Enric Jané et al. • Health Systems & Reform (2024)

Mobile health has the potential to revolutionize health care delivery and patient engagement. In this work, we discuss how integrating Artificial Intelligence into digital health applications focused on supply chain operation, patient manag...

DOAJ Open Access (DOAJ) DOI: 10.1080/23288604.2024.2387138

Reconstructing lost memories: Social memory as a foundation for disaster mitigation in Pandai Sikek

Handrian Ginting Jonson, Afrida Afrida, Zulkifli Addina, Subhiati Nur et al. • E3S Web of Conferences (2025)

This study examines the 2024 flash flood in Pandai Sikek, West Sumatra, through the lens of disaster anthropology and social memory. Based on preliminary research and one week of ethnographic fieldwork, the research reveals that while extre...

DOAJ Open Access (DOAJ) DOI: 10.1051/e3sconf/202567702011

Synthesize and characterization of hybrid aluminium alloy (AA6063) metal matrix composite (HAMMC) with corn cob ash and alumina (Al2O3) reinforcements

Ayenew Amare, Mezigebu Belay, Zewudu Wondimagegn • Journal of Materials Science: Materials in Engineering (2026)

Abstract The use of aluminium matrix composites (AMCs) in advanced engineering applications has increased due to their improved mechanical properties, such as hardness, ultimate tensile strength, toughness, wear, and corrosion resistance. A...

DOAJ Open Access (DOAJ) DOI: 10.1186/s40712-026-00421-0

Research on automatic roadway formation and surrounding rock stability control technology by roof cutting and pressure relief in Qianyingzi Coal Mine

Aiguo SUN, Haitao LI, Xuezheng CHENG, Yi WANG et al. • Meikuang Anquan (2024)

According to the engineering geological characteristics and production technology level of Qianyingzi Coal Mine, the stability control technology of surrounding rock of the cutting roof and pressure relief roadway is proposed. For the advan...

DOAJ Open Access (DOAJ) DOI: 10.13347/j.cnki.mkaq.20231069

Development, modelling and optimization of process parameters on the tensile strength of aluminum, reinforced with pumice and carbonated coal hybrid composites for brake disc application

Tanimu Kogi Ibrahim, Danjuma Saleh Yawas, Julius Thaddaeus, Bashar Danasabe et al. • Scientific Reports (2024)

Abstract This study focuses on optimizing double stir casting process parameters to enhance the tensile strength of hybrid composites comprising aluminum alloy, brown pumice, and coal ash, intended for brake disc applications. Analytical te...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-024-67476-x

Exploring fibre addition methods and mechanical properties of fibre-reinforced 3D printed concrete: A review

Syed Bustan Fatima Warsi, Biranchi Panda, Pankaj Biswas • Developments in the Built Environment (2023)

3D Concrete Printing (3DCP) is a growing field of sustainable technology that offers an avenue for rapid industrialisation of the construction industry. Over the years, many non-structural elements have been fabricated by 3D printing, thus ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.dibe.2023.100295

Stress-dilatancy properties for fiber-reinforced sand

KONG Yu-xia , SHENG Fei-fan , WANG Hui-juan • Yantu gongcheng xuebao (2018)

It is observed that randomly distributed polypropylene fibers act to interlock particles and thus improve the mechanical behavior of the reinforced soils. The polypropylene fiber inclusion clearly increases the shear strength of soils, and ...

DOAJ Open Access (DOAJ) DOI: 10.11779/CJGE201812012

Multi-step prediction in linearized latent state spaces for representation learning

Andrii Tytarenko • Sistemnì Doslìdženâ ta Informacìjnì Tehnologìï (2022)

In this paper, we derive a novel method as a generalization over LCEs such as E2C. The method develops the idea of learning a locally linear state space by adding a multi-step prediction, thus allowing for more explicit control over the cur...

DOAJ Open Access (DOAJ) DOI: 10.20535/SRIT.2308-8893.2022.3.09

A Focused Review of Smartphone Diet-Tracking Apps: Usability, Functionality, Coherence With Behavior Change Theory, and Comparative Validity of Nutrient Intake and Energy Estimates

Ferrara, Giannina, Kim, Jenna, Lin, Shuhao, Hua, Jenna et al. • JMIR mHealth and uHealth (2019)

BackgroundSmartphone diet-tracking apps may help individuals lose weight, manage chronic conditions, and understand dietary patterns; however, the usabilities and functionalities of these apps have not been well studied. Objecti...

DOAJ Open Access (DOAJ) DOI: 10.2196/mhealth.9232

Analysis and optimal design of low frequency road noise based on new energy MPV vehicle

BIN Shibo; XIE Yunhe; ZHENG Weiguang; WEI Shangjun; GAO Ting; LIU Xuewen • Nantong Daxue xuebao. Ziran kexue ban (2025)

Low-frequency road noise is a primary contributor to in-cabin noise and directly affects overall vehicle comfort. With the rapid development of electric vehicles, this issue has attracted increasing attention from the automotive industry. T...

DOAJ Open Access (DOAJ) DOI: 10.12194/j.ntu.20240724001