Reset
Showing 15 of 15 academic articles

Rewind, recycle, revive! An investigation into nostalgia-driven sequel and requel practices in small European film industries: The case of Flanders

Atalya de Cock, Eduard Cuelenaere, Gertjan Willems, Stijn Joye • NECSUS (2023)

In the last decade, nostalgia-driven imitative filmmaking – characterised by requels and ‘belated’ sequels – has become ubiquitous in commercial cinema globally. While the transgenerational appeal of nostalgia in Hollywood has been research...

DOAJ Open Access (DOAJ) DOI: 10.25969/mediarep/21730

Why Socio-metabolic Studies are Central to Ecological Economics

Simron J Singh, Simran Talwar, Megha Shenoy • Ecology, Economy and Society – The INSEE Journal (2021)

Global material extraction has tripled since the 1970s, with more than 100 billion tonnes of materials entering the world economy each year. Only 8.6% of this is recycled, while 61% ends up as waste and emissions that is the leading cause o...

DOAJ Open Access (DOAJ) DOI: 10.37773/ees.v4i2.461

Evaluation of eco-efficient geopolymer using chamotte and waste glass-based alkaline solutions

Beatryz C. Mendes, Leonardo G. Pedroti, Carlos Maurício F. Vieira, José Maria F. Carvalho et al. • Case Studies in Construction Materials (2022)

Geopolymers are binder materials that can be an alternative to replace Portland cement. They are considered less aggressive to the environment because of the lower emission of CO2 and use of energy in their production chain. This work aimed...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.cscm.2021.e00847

Effects of Concrete Grades on Strength Characteristics of Metakaolin Modified Recycled Aggregate Concrete

A. U. Adebanjo, B. I. O. Dahunsi, J. O. Labiran • Nigerian Journal of Technological Development (2021)

In this study, locally produced Metakaolin (MK) was used as an admixture in recycled aggregate concrete of grades M 25 and M 30. The content of MK varied from 0-15% at 5% intervals. The physical and mechanical properties (bulk density, spec...

DOAJ Open Access (DOAJ)

Reusing Effluent Water in Drainage Ditches for Irrigation in Hilly Regions

SHAO Peiyin, LI Yalong, XIONG Yujiang, YUAN Niannian et al. • Guan'gai paishui xuebao (2023)

【Objective】 Most hilly regions in China are short of freshwater resources and recycling the effluent water in their drainage ditches is a way to relieve this pressure and improve water use efficiency. This paper investigates how reusing the...

DOAJ Open Access (DOAJ) DOI: 10.13522/j.cnki.ggps.2022315

Pricing Decision-Making Considering Ambiguity Tolerance in Consumers: Evidence from Recycled Building Material Enterprises

Jie Peng, Yuxi Zou, Hao Zhang, Lianghui Zeng et al. • Systems (2025)

Globally, recycled building materials have attracted much attention, but the ambiguity of the use of recycled building materials makes it difficult for the building material remanufacturer (BMR) to compete with the building material manufac...

DOAJ Open Access (DOAJ) DOI: 10.3390/systems13020098

Reclaimed water in Taiwan: current status and future prospects

Hai-Hsuan Cheng, Wan-Sheng Yu, Shu-Chuang Tseng, Yi-Ju Wu et al. • Sustainable Environment Research (2023)

Abstract According to the Taiwan Water Resources Agency, Ministry of Economic Affairs, the average water demand shortage is 530.6 million m3 yr−1 during the period of 2011 to 2019, and the situation will worsen in the near future due to glo...

DOAJ Open Access (DOAJ) DOI: 10.1186/s42834-023-00177-8

A short review on water management and reuse in textile industry – a sustainable approach

Nitin Thombre, Pritesh Patil, Ankita Yadav, Anand Patwardhan • Discover Water (2025)

Abstract The textile industry is one of the important and largest industry that consumes major chunk of the water in the world. This industry produces a large amount of wastewater during the processes such as sizing, de-sizing, scouring, bl...

DOAJ Open Access (DOAJ) DOI: 10.1007/s43832-025-00215-z

Histological Evidences of Autograft of Dentin/Cementum Granules into Unhealed Socket at 5 Months after Tooth Extraction for Implant Placement

Masaru Murata, Md Arafat Kabir, Yukito Hirose, Morio Ochi et al. • Journal of Functional Biomaterials (2022)

The aim of this clinical case study was to observe biopsy tissues at 5 months after an autograft of a partially demineralized dentin/cementum matrix (pDDM) into a tooth-extracted socket exhibiting healing failure. A 66-year-old female prese...

DOAJ Open Access (DOAJ) DOI: 10.3390/jfb13020066

Manufacturing of a New Generations from the Recycled AL Scrape Reinforced with AL2O3 - GNS Composite Powder by Vortex Technique for Automotive Spare Parts

Fathei Nouh, Omayma El kady, Sabry abdel aziz • International Journal of Industry and Sustainable Development (2024)

This research addresses the urgent challenges facing the materials and metallurgical industries, driving manufacturers to seek innovative solutions for material recycling. Aluminum scrape in used to manufacture a composite material with a h...

DOAJ Open Access (DOAJ) DOI: 10.21608/ijisd.2024.302067.1074

Life cycle assessment of a renewable energy generation system with a vanadium redox flow battery in a NZEB household

J.R. Gouveia, E. Silva, T.M. Mata, A. Mendes et al. • Energy Reports (2020)

Buildings are responsible for a significant part of the global energy consumption. Besides the need to improve their energy efficiency, new buildings also need to generate their own energy, preferably from renewable sources, to become more ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.egyr.2019.08.024

Machine Learning–Based Wear Prediction of Recycled Magnesium Matrix Composites Reinforced With Ceramic Fibers

Meenakshi Sudarvizhi Seenipeyathevar, Prasath Palaniappan, Vijayakumar Arumugam, Vivek Sivakumar et al. • Engineering Reports (2026)

ABSTRACT This study deals with an integrated experimental‐machine learning framework for wear estimation in functionally graded composites made from recycled magnesium machining chips, using low‐cost ceramic fibers as reinforcement with the...

DOAJ Open Access (DOAJ) DOI: 10.1002/eng2.70686