Reset
Showing 20 of 22 academic articles

Digital Maturity Assessment and Conceptualization: Manufacturing Companies Perspective

Mohammadreza Sheikhattar, Hassan Yeganeh, Atefeh Farazmand • International Journal of Information and Communication Technology Research (2025)

Production is a key component of every nation’s economy, yet the manufacturing sector faces major challenges and opportunities due to rapid digital transformation. Many companies have not fully adapted to these technological shifts, limitin...

DOAJ Open Access (DOAJ)

Flat Plate based- Solar System with a tracking system

M. Abdunnabi, A. Abusalama, M. Algamil, M. Almontaser • Solar Energy and Sustainable Development (2018)

Water heating in Libyan domestic sector represents over 29% of the total electrical consumption. There is a great potential of hot water usage in the industrial and other sectors. Solar energy can play vital role in providing hot water to t...

DOAJ Open Access (DOAJ)

Reducing Torque Ripple Through Innovative Configuration of Permanent Magnet Based on Air Gap Field Modulation Theory in a Novel Axial Flux Reversal Permanent Magnet Machine

Jilong Zhao, Qing Wang, Qingfeng Han • IEEE Access (2024)

In this paper, a novel axial flux reversal permanent magnet (PM) (AFRPM) machine, which combines the merit of the axial flux PM (AFPM) machine and flux reversal PM machine, is proposed. Meanwhile, according to the characteristics of the mac...

DOAJ Open Access (DOAJ) DOI: 10.1109/ACCESS.2024.3389699

Exploring fibre addition methods and mechanical properties of fibre-reinforced 3D printed concrete: A review

Syed Bustan Fatima Warsi, Biranchi Panda, Pankaj Biswas • Developments in the Built Environment (2023)

3D Concrete Printing (3DCP) is a growing field of sustainable technology that offers an avenue for rapid industrialisation of the construction industry. Over the years, many non-structural elements have been fabricated by 3D printing, thus ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.dibe.2023.100295

Approaches to Innovation Process Assessment: Complex Results from an Exploratory Investigation

Ondrej Zizlavsky • International Journal of Engineering Business Management (2015)

Managing innovation is vital for many enterprises to survive in a competitive and dynamic environment. Thus, decision-makers have always been involved in the challenge of finding the right performance measures for the innovation process. Th...

DOAJ Open Access (DOAJ) DOI: 10.5772/62052

PENINGKATAN KUALITAS DENGAN PENDEKATAN SIX SIGMA DAN PERPEKTIF MBNQA SEBAGAI KRITERIA PRASYARAT BAKU MUTU PADA PT. TAMANACO

Aditya Apriawan Saputra • J@ti Undip: Jurnal Teknik Industri (2025)

Penelitian ini dilatarbelakangi oleh tingginya angka cacat produksi aluminium collapsible tube khususnya pada produk Kloderma 0.05% gel 5 gram Ø13,4 x 90 mm di PT. Tamanaco. Pada semester kedua tahun 2023, tingkat defect mencapai 8,81% (1.2...

DOAJ Open Access (DOAJ) DOI: 10.14710/jati.20.2.42-68

Cross-national validation of the MHQoL: psychometric evaluation and open-source tools for assessing mental health quality of life

Beatriz Olaya, Christina Maria van der Feltz-Cornelis, Leona Hakkaart-van Roijen, Frederick W Thielen et al. • BMJ Open (2026)

Objectives To validate the cross-national psychometric properties of the Mental Health Quality of Life questionnaire (MHQoL) and to develop an open-source toolbox for its scoring, transformation and presentation.Design Secondary analysis of...

DOAJ Open Access (DOAJ) DOI: 10.1136/bmjopen-2025-108598

Development Perspectives of Manufacturing Industriesin Nepal

Surendra Kumar Bohara, Dinesh Raj Bhuju, Tikeshwori Bohara • Revista Internacional de Cooperación y Desarrollo (2018)

Este artículo tiene como objetivo estudiar la relación entre las cuentas nacionales con el crecimiento industrial en Nepal, a través de un estudio de enfoque cualitativo y cuantitativo. Los datos de la línea de tiempo se analizaron para pro...

DOAJ Open Access (DOAJ) DOI: 10.21500/23825014.3912

Comparative analysis of the conditions of readiness of Russia and Ukraine for neo-industrialization

M. P. Kalynychenko • Интеллект. Инновации. Инвестиции (2021)

The relevance of the study is that a comparative analysis of the conditions of readiness for neo-industrialization of economic systems (states, regions, industrial complexes, industrial enterprises), taking into account the totality of obst...

DOAJ Open Access (DOAJ) DOI: https://doi.org/10.25198/2077-7175-2021-6-37

Techno-economic feasibility analyses of grid- connected solar photovoltaic power plants for small scale industries of Punjab, Pakistan

Monib Ahmad, Abraiz Khattak, Abdul Kashif Janjua, Ahmad Aziz Alahmadi et al. • Frontiers in Energy Research (2022)

The globally soaring energy prices and electricity shortfall are major hurdles in the economic development of Pakistan. To cope with periodic power outages, small and medium enterprise (SME) business owners have to fall back on alternate po...

DOAJ Open Access (DOAJ) DOI: 10.3389/fenrg.2022.1028310

Industry quantum computing applications

Andreas Bayerstadler, Guillaume Becquin, Julia Binder, Thierry Botter et al. • EPJ Quantum Technology (2021)

Abstract Quantum computing promises to overcome computational limitations with better and faster solutions for optimization, simulation, and machine learning problems. Europe and Germany are in the process of successfully establishing resea...

OPENALEX cc-by DOI: https://doi.org/10.1140/epjqt/s40507-021-00114-x

The role of renewable energy in the global energy transformation

Dolf J. Gielen, Francisco Boshell, Değer Saygin, Morgan Bazilian et al. • Energy Strategy Reviews (2019)

This paper explores the technical and economic characteristics of an accelerated energy transition to 2050, using new datasets for renewable energy. The analysis indicates that energy efficiency and renewable energy technologies are the cor...

OPENALEX cc-by-nc-nd DOI: https://doi.org/10.1016/j.esr.2019.01.006

Effects of industrialization on Tanzania’s economic growth: a case of manufacturing sector

Eunice Jonathan Lugina, Adam Beni Swebe Mwakalobo, Francis Lwesya • Future Business Journal (2022)

Abstract This article examines the impact of industrialization on economic growth in Tanzania focusing on the drivers of structural changes in the manufacturing sector. We apply the vector error correction model based on a parsimonious mode...

DOAJ Open Access (DOAJ) DOI: 10.1186/s43093-022-00177-x

Applying Natural Language Processing in Manufacturing

Marvin Carl May, Jan Neidhöfer, Tom Körner, Louis Schäfer et al. • Procedia CIRP (2022)

Despite great progress in the digitization of the industrial sector through Industry 4.0 and widely available data, data analysis is typically constrained to numerical data, not the synthesis of knowledge. Although valuable employee knowled...

OPENALEX cc-by-nc-nd DOI: https://doi.org/10.1016/j.procir.2022.10.071

Edge AI for Industrial Visual Inspection: YOLOv8-Based Visual Conformity Detection Using Raspberry Pi

Marcelo T. Okano, William Aparecido Celestino Lopes, Sergio Miele Ruggero, Oduvaldo Vendrametto et al. • Algorithms (2025)

This paper presents a lightweight and cost-effective computer vision solution for automated industrial inspection using You Only Look Once (YOLO) v8 models deployed on embedded systems. The YOLOv8 Nano model, trained for 200 epochs, achieve...

DOAJ Open Access (DOAJ) DOI: 10.3390/a18080510

AI-Driven Identification of Critical Dependencies in US-China Technology Supply Chains: Implications for Economic Security Policy

Guoli Rao, Chengru Ju, Zhen Feng • Journal of Advanced Computing Systems (2024)

This research examines the critical dependencies within US-China technology supply chains through advanced artificial intelligence methodologies, addressing significant economic security implications in an era of strategic competition. The ...

DOAJ Open Access (DOAJ) DOI: 10.69987/JACS.2024.41204