Reset
Showing 15 of 15 academic articles

Utilizing Waste Cotton/Pigeon Pea Stalk Fibers Composites for Enhanced Sound Absorption and Insulation in Automotive Interiors

Ariharasudhan Subramanian, Senthil Kumar Selvaraj, Rajaram Mani, Preethibha Chandrasekaran et al. • Journal of Natural Fibers (2024)

This study investigates the synthesis and characterization of composite materials, pigeon pea stem, and cotton fibers blended in different ratios such as 100/0, 70/30, 60/40, 50/50, 30/70, and 0/100. These composite materials were produced ...

DOAJ Open Access (DOAJ) DOI: 10.1080/15440478.2024.2333940

Mixed Systems of Quaternary Ammonium Foam Drainage Agent with Carbon Quantum Dots and Silica Nanoparticles for Improved Gas Field Performance

Yongqiang Sun, Yongping Zhang, Anqi Wei, Xin Shan et al. • Nanomaterials (2024)

Foam drainage agents enhance gas production by removing wellbore liquids. However, due to the ultra-high salinity environments of the Hechuan gas field (salinity up to 32.5 × 104 mg/L), no foam drainage agent is suitable for this gas field....

DOAJ Open Access (DOAJ) DOI: 10.3390/nano14191590

From Flame Extinguishment to Reignition Control: Fire Suppressants, Sustained Cooling Mechanisms, and Fire-Safety Challenges in Lithium-Ion Battery Fires

Qiqi Yang, Qingwen Lin, Ruichao Wei, Jiaxin Gao et al. • Batteries (2026)

Lithium-ion battery fires are governed by continuous heat release during thermal runaway, flammable gas venting, and thermal coupling between adjacent cells. Even after visible flames are extinguished, post-extinguishment temperature rise, ...

DOAJ Open Access (DOAJ) DOI: 10.3390/batteries12080305

Physical and Chemical Effects of Different Working Gases in Coffee Brewing: A Case Study of Caffè Firenze

Giulia Angeloni, Piernicola Masella, Lorenzo Guerrini, Agnese Spadi et al. • Foods (2020)

(1) Background: Recently, a new espresso extraction method, Caffè Firenze, has been developed, which uses gas at operating pressures of 20 bar to obtain abundant, persistent foam. The experiment aimed to evaluate the effect of using six gas...

DOAJ Open Access (DOAJ) DOI: 10.3390/foods9121825

Exploring a Novel Material and Approach in 3D-Printed Wrist-Hand Orthoses

Diana Popescu, Mariana Cristiana Iacob, Cristian Tarbă, Dan Lăptoiu et al. • Journal of Manufacturing and Materials Processing (2024)

This article proposes the integration of two novel aspects into the production of 3D-printed customized wrist-hand orthoses. One aspect involves the material, particularly Colorfabb varioShore thermoplastic polyurethane (TPU) filament with ...

DOAJ Open Access (DOAJ) DOI: 10.3390/jmmp8010029

Oxidation‐etching induced morphology regulation of Cu catalysts for high‐performance electrochemical N2 reduction

Xuqiang Ji, Ting Wang, Qian Liu, Yongsong Luo et al. • EcoMat (2020)

Abstract Renewable‐electricity‐driven N2 reduction is an attractive approach for ambient NH3 synthesis, but active electrocatalysts are needed to enable the N2 reduction reaction. Monolithic electrodes with active components anchored on con...

DOAJ Open Access (DOAJ) DOI: 10.1002/eom2.12026

Materials Science for Engineers

J.C. Anderson, K. D. Leaver, Rees D. Rawlings, Patrick S. Leevers • CRC Press eBooks (2004)

This fifth edition of a successful textbook continues to provide students with an introduction to the basic principles of materials science over a broad range of topics. The authors have revised and updated this edition to include many new ...

OPENALEX DOI: https://doi.org/10.1201/9781315272627

Improvement in energy absorption properties of aluminum foams by designing pore-density distribution

Fateme Hassanli, Mohammad Hossein Paydar • Journal of Materials Research and Technology (2021)

In the present work, effect of structural design on the mechanical properties of aluminum foams was studied. Aluminum foams with a relative density in the range of 0.28–0.48 with uniform and graded pore frequency were fabricated through pow...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2021.06.073

Effect of Heated Wall Corrugation on Thermal Performance in an L-Shaped Vented Cavity Crossed by Metal Foam Saturated with Copper–Water Nanofluid

Luma F. Ali, Hussein Togun, Abdellatif M. Sadeq • Computation (2025)

Practical applications such as solar power energy systems, electronic cooling, and the convective drying of vented enclosures require continuous developments to enhance fluid and heat flow. Numerous studies have investigated the enhancement...

DOAJ Open Access (DOAJ) DOI: 10.3390/computation13090218

A Review of Natural Language Processing in Medical Education

Michael A. Chary, Saumil Parikh, Alex F. Manini, Edward W. Boyer et al. • Western Journal of Emergency Medicine (2018)

Natural language processing (NLP) aims to program machines to interpret human language as humans do. It could quantify aspects of medical education that were previously amenable only to qualitative methods. The application of NLP to medical...

OPENALEX cc-by DOI: https://doi.org/10.5811/westjem.2018.11.39725 PMC: 6324711

Record‐High Latent Heat, Ultra‐Fast Relaxation and Closed‐Loop Recycling Double‐Brush Polymer Networks for Self‐Adaptive Thermal Interface Management

Qiguang Liu, Yanyun Li, Zhenghao Wu, Junjie Cheng et al. • Advanced Science (2026)

ABSTRACT In the era of artificial intelligence (AI)‐driven high‐performance computing, phase change materials (PCMs) are critical for high‐flux thermal management. PCMs are evolving toward high enthalpy, low interfacial thermal resistance (...

DOAJ Open Access (DOAJ) DOI: 10.1002/advs.202521482