Reset
Showing 20 of 36 academic articles

Study of the corrosion properties of powder rolled Ti–6Al–4V alloy applied in the biomedical implants

Mandlenkosi G.R. Mahlobo, Lethu Chikosha, Peter A. Olubambi • Journal of Materials Research and Technology (2022)

Great efforts have been made in fabricating Ti–6Al–4V alloys that can be used in the biomedical implants industry. The increasing interest in using fabricated Ti–6Al–4V alloys in industrial applications is mainly due to the properties of al...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2022.04.004

New Compounds Derived from Nitrophenol Synthesis, Structural investigation and anticorrision Properties

Ali Mahdi Farhan, Hanaa Kadtem Egzar, Hawraa Mahdi Alabidi • Acta Chimica Slovenica (2024)

A new azo compound [2-((4-hydroxy-3-(E)-(2-hydroxy-5-nitrophenyl)diazenyl)benzaldeyde and the azo schiff derivative [2-((4-hydroxy-3-((E)-(2-hydroxy-5-nitrophenyl)diazenyl)benzylidene)amino)-4-nitrophenol (Azo-S) has been synthesized. 13C-N...

DOAJ Open Access (DOAJ) DOI: 10.17344/acsi.2023.8489

Effect of Corrosion Product Films Induced by Tensile Stress on P110 Casing Steels Induced in CO2 Environment

Yangzhong Jing, Shuliang Wang, Yuyao Chen, Mingyu Bao et al. • International Journal of Electrochemical Science (2018)

Corrosion product films were formed on P110 casing steels by high-temperature and high-pressure autoclave in a CO2 environment induced by tensile stress. The effects of applied tensile stress on the protection characteristics and electroche...

DOAJ Open Access (DOAJ) DOI: 10.20964/2018.08.21

Microstructure and corrosion behavior of SLM–Ti6Al4V with different fabrication angles in F−-containing solutions

Yao WANG, Xiao-ying YAN, Cheng MAN, Hong-wei ZHANG et al. • 工程科学学报 (2021)

Selective laser fusion (SLM) is an emerging 3D printing technology that can greatly shorten the processing cycle and reduce the production cost of medical implants, thus offering broad prospects for application in the biomedical field. In a...

DOAJ Open Access (DOAJ) DOI: 10.13374/j.issn2095-9389.2020.09.29.001

Microstructure and corrosion resistance of Sm-containing Al-Mn-Si-Fe-Cu alloy

Han Yuyin, Ding Dongyan, Du Jiandi, Gao Yongjin • 上海师范大学学报. 自然科学版 (2017)

Optimizing alloy composition is an effective way to improve physical and chemical properties of automobile heat exchanger materials.A Sm-containing Al-Mn-Si-Fe-Cu alloy was investigated through transmission electron microscopy,scanning elec...

DOAJ Open Access (DOAJ) DOI: 10.3969/J.ISSN.1000-5137.2017.06.006

Principles of Materials Science and Engineering

William F. Smith • Journal of International Crisis and Risk Communication Research (1986)

This book attempts to provide basic knowledge about the structure, properties, and processing of engineering materials and their applications. The first chapter gives an introduction to materials science and engineering and briefly describe...

OPENALEX Open Access

Effect of Ageing on a Novel Cobalt-Free Precipitation-Hardenable Martensitic Alloy Produced by SLM: Mechanical, Tribological and Corrosion Behaviour

Inés Pérez-Gonzalo, Florentino Alvarez-Antolin, Alejandro González-Pociño, Luis Borja Peral-Martinez • Journal of Manufacturing and Materials Processing (2025)

This study investigates the mechanical, tribological, and electrochemical behaviour of a novel precipitation-hardenable martensitic alloy produced by selective laser melting (SLM). The alloy was specifically engineered with an optimised com...

DOAJ Open Access (DOAJ) DOI: 10.3390/jmmp9080261

Hybrid coatings for orthopaedic implants formed by physical vapour deposition and microarc oxidation

Roman Gabor, Ladislav Cvrček, Martina Doubková, Václav Nehasil et al. • Materials & Design (2022)

This study is focused on the preparation of new hybrid layers intended for surface modification of Ti-6Al-4V alloys for potential orthopaedic and dental applications. Combination of the technology of physical vapour deposition (PVD) and sub...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.matdes.2022.110811

Handbook of Archaeological Sciences

A. Mark Pollard, Don R. Brothwell • University of Groningen research database (University of Groningen / Centre for Information Technology) (2001)

List of Contributors. Foreword: Martin Aitken FRS. Acknowledgements. Introduction: Archaeological Science: A current Perspective (D. Brothwell & A. Pollard). DATING.Overview -- Dating in Archaeology: Past, Present and Future (R. Hedges). Qu...

OPENALEX

Environmentally friendly magnesium potassium phosphate cement-based coating with high anti-corrosion performance on iron

Miaomiao Wang, Xing Ming, Qiao Wang, Hongyao Ding et al. • Journal of Materials Research and Technology (2024)

Magnesium potassium phosphate cement-based (MKPC) coating is regarded as an attractive green coating that improves the corrosion resistance of metals. Unfortunately, practical use remains challenging owing to the rapid solidification and ha...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2024.11.220

Numerical investigation of corroded middle‐high strength pipeline subjected to combined internal pressure and axial compressive loading

Linlin Lu, Lecai Liang • Energy Science & Engineering (2021)

Abstract Buried oil and gas pipelines may face the threat of geological disasters such as landslides, faults, and floods. However, long‐term buried oil and gas pipelines often have corrosion defects, which bring greater challenges to the sa...

DOAJ Open Access (DOAJ) DOI: 10.1002/ese3.830

Flexural Behaviour of Corroded RC Beams Strengthened with CFRCM: Refined Modelling, Parametric Analysis, and Design Assessment

Chaoqun Zeng, Jing-Pu Tang, Liangliang Wei, Miaochang Zhu et al. • Buildings (2026)

Reinforced concrete (RC) beams strengthened with carbon-fabric-reinforced cementitious matrix (CFRCM) systems have shown potential for restoring flexural performance, yet their effectiveness under different corrosion levels remains insuffic...

DOAJ Open Access (DOAJ) DOI: 10.3390/buildings16020377

Visionary figures in the field of electrochemistry who revolutionized voltammetry

Rubin Gulaboski • Macedonian Journal of Chemistry and Chemical Engineering (2024)

Understanding energetics and electron behavior has been pivotal in elucidating numerous fundamental phenomena, including electricity, corrosion, respiration, energy generation in biological systems, intermolecular interactions within living...

DOAJ Open Access (DOAJ) DOI: 10.20450/mjcce.2024.2847

Synthesize and characterization of hybrid aluminium alloy (AA6063) metal matrix composite (HAMMC) with corn cob ash and alumina (Al2O3) reinforcements

Ayenew Amare, Mezigebu Belay, Zewudu Wondimagegn • Journal of Materials Science: Materials in Engineering (2026)

Abstract The use of aluminium matrix composites (AMCs) in advanced engineering applications has increased due to their improved mechanical properties, such as hardness, ultimate tensile strength, toughness, wear, and corrosion resistance. A...

DOAJ Open Access (DOAJ) DOI: 10.1186/s40712-026-00421-0

Corrosion Behavior for Sealing Polymer Materials under Simulated Condition for High-Pressure Proton Exchange Membrane Water Electrolysis

PENG Heng, DONG Minghui, ZHANG Maoqi, BAI Mingxian, GUO Jianwei • Cailiao Baohu (2026)

Sealing is a core factor for the safe operation of high-pressure proton exchange membrane electrolysis cells(PEMECs).To investigate the corrosion behavior of sealing polymer materials,two experimental methods were established: an accelerate...

DOAJ Open Access (DOAJ) DOI: 10.16577/j.issn.1001-1560.2026.0015

A Rechargeable Zinc–Copper Voltaic Battery Built from Cost-Effective Electrodes and Electrolytes

Jose Fernando Florez Gomez, Songyang Chang, Irfan Ullah, Juan C. Velez Reyes et al. • Batteries (2026)

The zinc–copper (Zn-Cu) voltaic battery is the first battery made in human history, but the Cu2+ dissolution issue leads to the reaction’s irreversibility. To tackle this challenge, solid-state electrolytes, ion exchange membranes, and func...

DOAJ Open Access (DOAJ) DOI: 10.3390/batteries12060215

Experimental study on the impact of sulfate attack on the performance of shaft lining concrete under sustained compressive load

Guo-qiang Xu, Wei Zhang, Si Chen, Zhen-kai Zhu et al. • Case Studies in Construction Materials (2024)

To investigate the impact of sulfate corrosion on the performance of shaft lining concrete under sustained compressive loads, this study immersed samples in a 10 % sodium sulfate solution after subjecting to sustained compressive loads of 0...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.cscm.2024.e03657

Evaluación del efecto de la aplicación de un recubrimiento de Ni-P sobre la resistencia a la corrosión de la aleación de aluminio 7075 T6

L. Gil, L. Jiménez, A. C. Castro, M. H. Staia et al. • Revista de Metalurgia (2008)

La aleación de aluminio 7075-T6 es una aleación estructural ampliamente utilizada para aplicaciones aeronáuticas, debido a su alta relación entre resistencia mecánica y peso. Dependiendo de las condiciones ambientales, algunos mecanismos de...

DOAJ Open Access (DOAJ) DOI: 10.3989/revmetalm.2008.v44.i1.96

Adsorption and Corrosion Inhibition Behaviour of Oil Extracted from Moringa peregrina leaves for Carbon Steel in Acidic Media: Experimental and Computational Studies

Ismat H. Ali, Mohammad I. Khan, Alhafez M. Alraih, Mohammed K. Almesfer et al. • International Journal of Electrochemical Science (2021)

The current research aimed at investigating the potential corrosion inhibitory effect of essential oil extracted from Moringa peregrina leaves on carbon steel in acidic conditions. Gas chromatography (GC) and scanning electron microscope (S...

DOAJ Open Access (DOAJ) DOI: 10.20964/2021.08.49