Reset
Showing 20 of 2,713 academic articles

Influence of chemical composition and discontinuities on energy transformation and rock mass behaviour: Insights into geological dynamic

Naeem Abbas, Kegang Li, Yewuhalashet Fissha, Zemicael Gebrehiwot et al. • The Journal of Engineering (2024)

Abstract In this study, efforts were made to incorporate the influence of discontinuities and failure modes of rock into the classification of rock masses. The past tectonic activities may create microfractures in the rock body therefore th...

DOAJ Open Access (DOAJ) DOI: 10.1049/tje2.12388

Fast Timing Techniques in FLIM Applications

Liisa M. Hirvonen, Klaus Suhling • Frontiers in Physics (2020)

Fluorescence lifetime imaging (FLIM) is increasingly used in many scientific disciplines, including biological and medical research, materials science and chemistry. The fluorescence label is not only used to indicate its location, but also...

DOAJ Open Access (DOAJ) DOI: 10.3389/fphy.2020.00161

EXARIS Model Development: Enhancing Elementary Scientific and Digital Literacy

Exsaris Januar, Nurhizrah Gistituati, Yanti Fitria, Alwen Bentri et al. • Educational Process: International Journal (2025)

Background/purpose. Study addresses the problem of low scientific and digital literacy among Grade 6 students (Phase C) in the IPAS (Science and Social Studies) subject under the Merdeka Curriculum, particularly in the theme “Our Endangered...

DOAJ Open Access (DOAJ) DOI: 10.22521/edupij.2025.18.450

Microstructure and corrosion behavior of SLM–Ti6Al4V with different fabrication angles in F−-containing solutions

Yao WANG, Xiao-ying YAN, Cheng MAN, Hong-wei ZHANG et al. • 工程科学学报 (2021)

Selective laser fusion (SLM) is an emerging 3D printing technology that can greatly shorten the processing cycle and reduce the production cost of medical implants, thus offering broad prospects for application in the biomedical field. In a...

DOAJ Open Access (DOAJ) DOI: 10.13374/j.issn2095-9389.2020.09.29.001

The Evolution of COVID-19 Transmission with Superspreaders Class under Classical and Caputo Piecewise Operators: Real Data Perspective from India, France, and Italy

Shabir Ahmad, Salma Haque, Khalid Ali Khan, Nabil Mlaiki • Fractal and Fractional (2023)

In this study, we analyze the transmission of the COVID-19 model by using a piecewise operator in the classical Caputo sense. The existence along with the uniqueness of the solution of the COVID-19 model under a piecewise derivative is pres...

DOAJ Open Access (DOAJ) DOI: 10.3390/fractalfract7070501

Finite element analysis on the near field properties of metallic cavities with atomic sharpness

Qiyuan Dai, Liang Ma, Li Li, Guangjun Tian • Results in Physics (2023)

Using finite element calculations, we investigated the near field properties of two types of commonly used metal nanostructures (a tip-substrate model representing a scanning tunneling microscope type setup (TS) and a nanoparticle-on-mirror...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.rinp.2023.106360

Materials science and engineering

• World science report (1996)

a b s t r a c t The dislocation density and the Burgers vector population are determined within the Cu and Nb layers in highly textured sputter-deposited Cu-Nb multilayers by X-ray line profile analysis. The measurements are conducted with ...

OPENALEX DOI: https://doi.org/10.18356/9789210059091c023

The Coming of Materials Science

David A. Weitz • Physics Today (2002)

The Coming of Materials Science , Robert W. Cahn Pergamon, New York, 2001. $64.00 (568 pp.). isbn 0-08-042679-4 If one takes the broadest view, a significant fraction of modern-day physicists are materials scientists. Similarly, many chemis...

OPENALEX Open Access DOI: https://doi.org/10.1063/1.1496379

Materials science and engineering

CA (United States) Lawrence Livermore National Lab., D Lesuer, USDOE, Washington, DC (United States) (1997)

During FY-96, work within the Materials Science and Engineering Thrust Area was focused on material modeling. Our motivation for this work is to develop the capability to study the structural response of materials as well as material proces...

OPENALEX Open Access DOI: https://doi.org/10.2172/623044

Principles of Materials Science and Engineering

William F. Smith • Journal of International Crisis and Risk Communication Research (1986)

This book attempts to provide basic knowledge about the structure, properties, and processing of engineering materials and their applications. The first chapter gives an introduction to materials science and engineering and briefly describe...

OPENALEX Open Access

Thermodynamics and Kinetics in Materials Science

Boris S. Bokstein, Mikhail I. Mendelev, David J. Srolovitz • Oxford University Press eBooks (2005)

This text presents a concise and thorough introduction to the main concepts and practical applications of thermodynamics and kinetics in materials science. It is designed with two types of uses in mind: firstly for one or two semester unive...

OPENALEX DOI: https://doi.org/10.1093/oso/9780198528036.001.0001

Big data and machine learning for materials science

Jose Fernando Rodrigues Junior, Larisa Florea, Maria Cristina Ferreira de Oliveira, Dermot Diamond et al. • Discover Materials (2021)

Herein, we review aspects of leading-edge research and innovation in materials science that exploit big data and machine learning (ML), two computer science concepts that combine to yield computational intelligence. ML can accelerate the so...

OPENALEX cc-by DOI: https://doi.org/10.1007/s43939-021-00012-0 PMC: 8054236

RETRACTED ARTICLE: A brief comparative examination of tangent hyperbolic hybrid nanofluid through a extending surface: numerical Keller–Box scheme

Wasim Jamshed, M. Prakash, S. Suriya Uma Devi, Rabha W. Ibrahim et al. • Scientific Reports (2021)

Abstract A novel hybrid nanofluid was explored in order to find an efficient heat-transmitting fluid to replace standard fluids and revolutionary nanofluids. By using tangent hyperbolic hybrid combination nanoliquid with non-Newtonian ethyl...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-021-03392-8

Effect of Heat Input on Microstructure and Hardness Distribution of Laser Welded Si-Al TRIP-Type Steel

Adam Grajcar, Maciej Różański, Sebastian Stano, Aleksander Kowalski et al. • Advances in Materials Science and Engineering (2014)

This study is concerned with issues related to laser welding of Si-Al type TRIP steels with Nb and Ti microadditions. The tests of laser welding of thermomechanically rolled sheet sections were carried out using keyhole welding and a solid-...

DOAJ Open Access (DOAJ) DOI: 10.1155/2014/658947

Extraction of nano-crystalline cellulose for development of aerogel: Structural, morphological and antibacterial analysis

Yash Vishnoi, Alok Kumar Trivedi, M.K. Gupta, Harinder Singh et al. • Heliyon (2024)

In the present decades, nanocellulose has been very popular in the field of nanotechnology and is receiving much attention from researchers because of its advantageous physicochemical properties, high aspect ratio, and high specific strengt...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.heliyon.2023.e23846

Development of a Portable Electrochemical Platform with Chip-Integrated Gold Electrodes for Detection of Pharmaceutical Pollutants

Miguel Tavares, Álvaro Torrinha, Raquel Queirós, João Piteira et al. • Engineering Proceedings (2023)

Electrochemical portable sensing systems can offer viable support in the analysis of environmental contaminants due to the compactness of their electronic components and overall simplicity of their detection principles. In the present work,...

DOAJ Open Access (DOAJ) DOI: 10.3390/CSAC2023-14900

Sustainable Farming: Nanofiber from the Pupunha Heart of Palm Sheath (<i>Bactris gasipaes</i>)-Enhanced Diets for Growing Rabbits and Their Health Impacts

Geovane Rosa de Oliveira, Carla de Andrade, Celina Tie Nishimori Duque, Antonio Diego Brandão Melo et al. • Veterinary Sciences (2025)

The use of nanofibers in farm animal diets can enhance nutrient absorption, minimize environmental problems, and generate a sustainable source of income. In this study, we investigated the effects of the partial inclusion of nanofibers prod...

DOAJ Open Access (DOAJ) DOI: 10.3390/vetsci12030263

A Novel Enhanced-Majority-Voter Universal Gate in Quantum Dot Cellular Automata with Energy Dissipation Analysis

S. Umira, R. Qadri, Z.A. Bangi, M. Tariq Banday et al. • Журнал нано- та електронної фізики (2017)

The Quantum effects instigate to dominate device recital when transistor geometries are abridged. Sometimes, transistors refrain to have the properties that mark them beneficial for computational designs. With the intention of keeping pace ...

DOAJ Open Access (DOAJ) DOI: 10.21272/jnep.9(3).03034

Synthesis and electrochemical characterization of iron oxide/poly(2-methylaniline) nanohybrids for supercapacitor application

Ahmed Ashour M., Essam Doaa, Kabatas Mohamed A. Basyooni-M., Abdel-Khaliek Ahmed A. et al. • Nanotechnology Reviews (2025)

This study reports the synthesis of a nanohybrid material composed of poly(2-methylaniline) (P(2MA)) and iron oxide (Fe2O3) as electrodes for supercapacitors using a simple and cost-effective method. Various characterization techniques were...

DOAJ Open Access (DOAJ) DOI: 10.1515/ntrev-2025-0189

Altered electrochemical properties of iron oxide nanoparticles by carbon enhance molecular biocompatibility through discrepant atomic interaction

S.K. Verma, A. Thirumurugan, P.K. Panda, P. Patel et al. • Materials Today Bio (2021)

Recent advancement in nanotechnology seeks exploration of new techniques for improvement in the molecular, chemical, and biological properties of nanoparticles. In this study, carbon modification of octahedral-shaped magnetic nanoparticles ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.mtbio.2021.100131