Reset
Showing 20 of 4,567 academic articles

Perbandingan Simple Logistic Classifier dengan Support Vector Machine dalam Memprediksi Kemenangan Atlet

Ednawati Rainarli, Arif Romadhan • Journal of Information Systems Engineering and Business Intelligence (2017)

Abstrak— Prediksi kemenangan atlet adalah hal yang harus dilakukan oleh pelatih ketika memutuskan pemain  yang akan diturunkan dalam suatu pertandingan. Banyaknya faktor-faktor yang mempengaruhi kemenangan atlet membuat keputusan tersebut t...

DOAJ Open Access (DOAJ) DOI: 10.20473/jisebi.3.2.87-91

An Integral Model to Provide Reactive and Proactive Services in an Academic CSIRT Based on Business Intelligence

Walter Fuertes, Francisco Reyes, Paúl Valladares, Freddy Tapia et al. • Systems (2017)

Cyber-attacks have increased in severity and complexity. That requires, that the CERT/CSIRT research and develops new security tools. Therefore, our study focuses on the design of an integral model based on Business Intelligence (BI), which...

DOAJ Open Access (DOAJ) DOI: 10.3390/systems5040052

Identificação e classificação de riscos na implantação da produção enxuta

Giuliano Almeida Marodin, Tarcísio Abreu Saurin, Carla Schwengber ten Caten • Production (2015)

Resumo O processo de implantação de sistemas de produção enxuta é complexo, demorado e sujeito a uma série de riscos. Este artigo tem como objetivo identificar e classificar os riscos presentes na implantação da produção enxuta (IPE). As qu...

DOAJ Open Access (DOAJ) DOI: 10.1590/0103-6513.033011

La evaporación en la cuenca del lago de Pátzcuaro, México

Enrique González-Sosa, Carlos A. Mastachi-Loza, J. Bernardo Rivera-Vázquez, Alfonso Gutiérrez-López et al. • Tecnología y ciencias del agua (2010)

La composición anual de la evaporación en la cuenca del lago de Pátzcuaro se integró por la evapotranspiración de la vegetación, las pérdidas por intercepción, la evaporación del cuerpo de agua y la evapotranspiración de la vegetación hidró...

DOAJ Open Access (DOAJ) DOI: 10.24850/j-tyca-2010-03-04

PENINGKATAN KUALITAS DENGAN PENDEKATAN SIX SIGMA DAN PERPEKTIF MBNQA SEBAGAI KRITERIA PRASYARAT BAKU MUTU PADA PT. TAMANACO

Aditya Apriawan Saputra • J@ti Undip: Jurnal Teknik Industri (2025)

Penelitian ini dilatarbelakangi oleh tingginya angka cacat produksi aluminium collapsible tube khususnya pada produk Kloderma 0.05% gel 5 gram Ø13,4 x 90 mm di PT. Tamanaco. Pada semester kedua tahun 2023, tingkat defect mencapai 8,81% (1.2...

DOAJ Open Access (DOAJ) DOI: 10.14710/jati.20.2.42-68

FPGA-based multi-view stereo system with flexible measurement setup

Christina Junger, Richard Fütterer, Maik Rosenberger, Gunther Notni • Measurement: Sensors (2022)

In recent years, stereoscopic image processing algorithms have gained importance for a variety of applications. To capture larger measurement volumes, multiple stereo systems are combined into a multi-view stereo (MVS) system. To reduce the...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.measen.2022.100425

Fitur Esktraksi LBP dan Naive Bayes dalam Klasifikasi Jenis Pepaya Berdasarkan Citra Daun

Christy Atika Sari, Eko Hari Rachmawanto • Jurnal Masyarakat Informatika (2021)

Tanaman merupakan bagian terpenting dalam kehidupan makhluk hidup sebagai oksigen untuk bernafas, selain itu juga digunakan sumber makanan, bahan bakar, obat-obatan dan masih banyak lagi manfaatnya. Salah satunya tanaman buah pepaya, bisa d...

DOAJ Open Access (DOAJ) DOI: 10.14710/jmasif.12.2.42222

Efficient tuna detection and counting with improved YOLOv8 and ByteTrack in pelagic fisheries

Yuanchen Cheng, Zichen Zhang, Yuqing Liu, Jie Li et al. • Ecological Informatics (2025)

Accurate estimation of tuna catch is crucial for effective pelagic fishery management and resource conservation. However, existing manual counting methods suffer from issues such as low accuracy and poor timeliness, highlighting the urgent ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.ecoinf.2025.103116

Prioritization of Surface Runoff Management Scenarios Using TOPSIS Method in Different Weighting Conditions (Case Study: Bojnord City)

Raziye Izanloo, Vahedberdi Sheikh • آب و فاضلاب (2019)

In the past decades, urban development and the increase in densely populated urban areas have led to expansion of the impervious surfaces. This resulted in an increase in the volume and peak discharge of runoff. To face the intensified urba...

DOAJ Open Access (DOAJ) DOI: 10.22093/wwj.2017.81822.2381

Nanofibers with a tunable wettability by electrospinning and physical crosslinking of poly(2-n-propyl-2-oxazoline)

Ella Schoolaert, Luisa Cossu, Jana Becelaere, Joachim F.R. Van Guyse et al. • Materials & Design (2020)

This work shows the design of highly porous membranes with tunable wettability based on poly(2-n-propyl-2-oxazoline) (PnPrOx) nanofibers. Wicking and advanced contact angle experiments demonstrate the high potential for applications requiri...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.matdes.2020.108747

Developing a Rational, Optimized Product of Centella asiatica for Examination in Clinical Trials: Real World Challenges

Kirsten M. Wright, Janis McFerrin, Armando Alcázar Magaña, Armando Alcázar Magaña et al. • Frontiers in Nutrition (2022)

Botanical products are frequently sold as dietary supplements and their use by the public is increasing in popularity. However, scientific evaluation of their medicinal benefits presents unique challenges due to their chemical complexity, i...

DOAJ Open Access (DOAJ) DOI: 10.3389/fnut.2021.799137

Similarity Measurement and Retrieval of Three-Dimensional Voxel Model Based on Symbolic Operator

Zhenwen He, Xianzhen Liu, Chunfeng Zhang • ISPRS International Journal of Geo-Information (2024)

Three-dimensional voxel models are widely applied in various fields such as 3D imaging, industrial design, and medical imaging. The advancement of 3D modeling techniques and measurement devices has made the generation of three-dimensional m...

DOAJ Open Access (DOAJ) DOI: 10.3390/ijgi13030089

CFD Simulation of the Slot Jet Impingement Heat Transfer Process and Application to a Temperature Control System for Galvanizing Line of Metal Band

Stefano Cademartori, Carlo Cravero, Martino Marini, Davide Marsano • Applied Sciences (2021)

A CFD model to simulate the cooling technique trough slot jet impingement has been developed. Such a technique has been tested on an existing vertical galvanizing industrial line, which initially envisaged a round jet configuration, the sub...

DOAJ Open Access (DOAJ) DOI: 10.3390/app11031149

Weighing and Prioritizing the Eight Principles of Integrated Health, Safety, Environment and Energy Management in Industries Covered by the Ministry of Industry, Mining and Trade

Rasoul Yarahmadi, Hamed Moridi, Ali Asghar Farshad, Fereshteh Taheri • Salāmat-i kār-i Īrān (2020)

Abstract: Aim and Background: Today, with the growth of different dimensions of sustainable development, managers at the organizational and governmental levels have become more and more interested in the components of sustainable developmen...

DOAJ Open Access (DOAJ)

Efficient generation of P53 biallelic knockout Diannan miniature pigs via TALENs and somatic cell nuclear transfer

Youfeng Shen, Kaixiang Xu, Zaimei Yuan, Jianxiong Guo et al. • Journal of Translational Medicine (2017)

Abstract Background Pigs have many features that make them attractive as biomedical models for various diseases, including cancer. P53 is an important tumor suppressor gene that exerts a central role in protecting cells from oncogenic trans...

DOAJ Open Access (DOAJ) DOI: 10.1186/s12967-017-1327-0