Reset
Showing 20 of 3,812 academic articles

Introduction to Nuclear Engineering

John R. Lamarsh, Edward Melkonian • Physics Today (1977)

(Most chapters end with References and Problems). 1. Nuclear Engineering. 2. Atomic and Nuclear Physics. Fundamental Particles. Atomic and Nuclear Structure. Atomic and Molecular Weight. Atomic and Nuclear Radii. Mass and Energy. Particle W...

OPENALEX DOI: https://doi.org/10.1063/1.3037597

Effect of Systematic Control of Pd Thickness and Annealing Temperature on the Fabrication and Evolution of Palladium Nanostructures on Si (111) via the Solid State Dewetting

Sundar Kunwar, Puran Pandey, Mao Sui, Quanzhen Zhang et al. • Nanoscale Research Letters (2017)

Abstract Si-based optoelectronic devices embedded with metallic nanoparticles (NPs) have demonstrated the NP shape, size, spacing, and crystallinity dependent on light absorption and emission induced by the localized surface plasmon resonan...

DOAJ Open Access (DOAJ) DOI: 10.1186/s11671-017-2138-1

Compensatory Analysis and Optimization for MADM for Heterogeneous Wireless Network Selection

Jian Zhou, Can-yan Zhu • Journal of Electrical and Computer Engineering (2016)

In the next-generation heterogeneous wireless networks, a mobile terminal with a multi-interface may have network access from different service providers using various technologies. In spite of this heterogeneity, seamless intersystem mobil...

DOAJ Open Access (DOAJ) DOI: 10.1155/2016/7539454

Optimization of cationic nanoparticles stabilized by poloxamer 188: A potential approach for improving the biological activity of Aloe perryi

Tahany Saleh Aldayel, Mohamed M. Badran, Abdullah H. Alomrani, Nora A. AlFaris et al. • Heliyon (2023)

Aloe perryi (AP) has gained considerable interest as a medicinal herb in various biological applications due to its rich phytochemical composition. However, the therapeutic benefits of AP could be potentiated by utilizing nanotechnology. Mo...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.heliyon.2023.e22691

Hybrid Organometallic-Inorganic Nanomaterial: Acetyl Ferrocene Schiff base Immobilized on Silica Coated Magnetite Nanoparticles

M. Masteri-Farahani, S. Adegozali, A. Matin • Journal of Nanostructures (2015)

In  this  work,  a  new  hybrid  organometallic-inorganic  hybrid nanomaterial was prepared by immobilization of acetyl ferrocene on the  surface  of magnetite  nanoparticles. Covalent  grafting of silica coated magnetite nanoparticles (SCM...

DOAJ Open Access (DOAJ) DOI: 10.7508/jns.2015.04.003

Innovative Entrepreneurship: a Source of Economic Growth in the Region

Elena Leonidovna Andreeva, Hermann Simon, Dmitry Andreyevich Karkh, Pavel Leonidovich Glukhikh • Экономика региона (2016)

This article presents the findings of the study on the role of innovative entrepreneurship in the regional economy. The analysis is based on the methodology developed by Hermann Simon, a German scientist who has coined the term ”hidden cham...

DOAJ Open Access (DOAJ) DOI: 10.17059/2016-3-24

Gold nanoparticles synthesized from Bacopa monneri plant extract: Bovine serum albumin protein interactions and antibacterial effectiveness

Pranita Rananaware, H. Swetha, Varsha Brahmkhatri • Next Nanotechnology (2025)

Gold nanoparticles (AuNPs) are widely used in various scientific and technological domains, particularly biomedicine due to their superior biocompatibility. This study focuses on the synthesis of biogenic gold nanoparticles (B-Au) and chemo...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.nxnano.2025.100305

The Thermomechanical Finite Element Analysis of 3003-H14 Plates Joined by the GMAW Process

Maribel Hernández, Ricardo R. Ambriz, Christian García, David Jaramillo • Metals (2020)

The gas metal arc welding (GMAW) process was used to weld 3003-H14 plates under restricted and unrestricted thermal expansion. Experimental and numerical analysis were conducted to determine the relation between weld thermal cycles and resi...

DOAJ Open Access (DOAJ) DOI: 10.3390/met10060708

Field Observations and Failure Analysis of an Excavation Damaged Zone in the Horonobe Underground Research Laboratory

Kazuhei AOYAGI, Eiichi ISHII, Tsuyoshi ISHIDA • Journal of MMIJ (2017)

In the construction of a deep underground facility, the hydromechanical properties of the rock mass around an underground opening are changed significantly due to stress redistribution. This zone is called an excavation damaged zone (EDZ). ...

DOAJ Open Access (DOAJ) DOI: 10.2473/journalofmmij.133.25

Impact of micromechanical properties of organic matter on the micro-mesopore structures of the over-mature shale in the Niutitang Formation

Hang Lei, Wenjibin Sun, Yujun Zuo, Zhonghu Wu et al. • Scientific Reports (2025)

Abstract The micromechanical properties of organic matter (OM) and organic pore structures in the over-mature stage are crucial for determining shale reservoir quality and assessing shale gas resource potential. However, there is still deba...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-025-89164-0

Stability Mechanism and Repair Method of U-Shaped Steel Reverse Arch Support in Soft Floor Roadway

Chao Wang, Xiaoyi Chen, Jiandong Zhang, Yongping Wu • Advances in Civil Engineering (2020)

This paper is aimed at the inverted arch support instability of track roadway with mining level +1100 m in Liuyuanzi Coal Mine. By means of field investigation, theoretical analysis, numerical calculation, and engineering practice, the inst...

DOAJ Open Access (DOAJ) DOI: 10.1155/2020/8814365

Research on automatic roadway formation and surrounding rock stability control technology by roof cutting and pressure relief in Qianyingzi Coal Mine

Aiguo SUN, Haitao LI, Xuezheng CHENG, Yi WANG et al. • Meikuang Anquan (2024)

According to the engineering geological characteristics and production technology level of Qianyingzi Coal Mine, the stability control technology of surrounding rock of the cutting roof and pressure relief roadway is proposed. For the advan...

DOAJ Open Access (DOAJ) DOI: 10.13347/j.cnki.mkaq.20231069

The influence of the volatiles on the slag composition for the heating process

Zhao Z.-Y., Zhao J.-X., Cui Y., Lu L. et al. • Journal of Mining and Metallurgy. Section B: Metallurgy (2020)

The physicochemical properties of slag are of great importance in pyrometallurgy. If there is a volatile component in the slag, evaporation will inevitably occur. As a result, the slag composition will change, and the measured results will ...

DOAJ Open Access (DOAJ) DOI: 10.2298/JMMB190509046Z

Evaluation of experimentally observed asymmetric distributions of hardness, strain and residual stress in cold drawn bars by FEM-simulation

Juliana Zottis, Carla Adriana Theis Soares Diehl, Alexandre da Silva Rocha • Journal of Materials Research and Technology (2018)

The purpose of this paper is to investigate the correlation of strain and hardness parameters in a drawing process chain of an SAE 1045 steel bar. The present work discusses the application of the experimental and numerical method of analys...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2018.01.004

Adaptation of SIVmac to baboon primary cells results in complete absence of in vivo baboon infectivity

Veronica Obregon-Perko, Amanda Mannino, Jason T. Ladner, Vida Hodara et al. • Frontiers in Cellular and Infection Microbiology (2024)

While simian immunodeficiency virus (SIV) infection is non-pathogenic in naturally infected African nonhuman primate hosts, experimental or accidental infection in rhesus macaques often leads to AIDS. Baboons, widely distributed throughout ...

DOAJ Open Access (DOAJ) DOI: 10.3389/fcimb.2024.1408245

The Composition Analysis of Endophytic Bacteria Community and Genetic Investigation of Major Strains in Jimai 44 Seeds

Yang Fengning, Wang Jinpeng • BIO Web of Conferences (2026)

In this research, the community composition and specific strains of endophytic bacteria in the seeds of Triticum aestivum L. cv. Jimai 44 were cultured in vitro and initially identified. Sequencing information revealed the main composition ...

DOAJ Open Access (DOAJ) DOI: 10.1051/bioconf/202623205002