Reset
Showing 20 of 1,992 academic articles

A DFT Study on the Electronic Structures and Conducting Properties of Rubrene and its Derivatives in Organic Field-Effect Transistors

Huipeng Ma, Na Liu, Jin-Dou Huang • Scientific Reports (2017)

Abstract We systematically studied the electronic structures and conducting properties of rubrene and its derivatives reported recently, and disscussed the influences of electron-withdrawing groups and chemical oxidation on the reorganizati...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-017-00410-6

CoCO3 from one-step micro-emulsion method as electrode materials for Faradaic capacitors

Yanfang Wang, Zheng Chang, Yi Zhang, Bingwei Chen et al. • Scientific Reports (2017)

Abstract Faradaic capacitor (FC) has been widely investigated during the past few decades, and dozens of prototypes have been proposed. However, it has not reached its full potential. In this work, we demonstrate a kind of FC comprising of ...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-017-02004-8

Catalytic effect comparison of TiO2 and La2O3 on hydrogen storage thermodynamics and kinetics of the as-milled La-Sm-Mg-Ni-based alloy

Yanghuan Zhang, Xin Wei, Wei Zhang, Zeming Yuan et al. • Journal of Magnesium and Alloys (2021)

In this investigation, mechanical grinding was applied to fabricating the Mg-based alloys La7Sm3Mg80Ni10 + 5 wt.% M (M = None, TiO2, La2O3) (named La7Sm3Mg80Ni10–5 M (M = None, TiO2, La2O3)). The result reveals that the structures of as-mil...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jma.2021.03.006

Laser Welding of Dissimilar Metal Joint of 6061 Al Alloy and Al Matrix Composite

Jun Dai, Banglong Yu, Wei Jiang, Hla Min Htun et al. • Advances in Materials Science and Engineering (2019)

In this paper, dissimilar metal joints of 6061 aluminum alloy and aluminum matrix composite material are investigated by laser welding. TiB2 particles were added into the lap joint. The welding process, microstructure, and the corrosion pro...

DOAJ Open Access (DOAJ) DOI: 10.1155/2019/2359841

Exact solution for bending analysis of functionally graded micro-plates based on strain gradient theory

Mohammadi Meisam, Iranmanesh Afshin, Naseralavi Seyed Sadegh, Farahmand Hamed • Science and Engineering of Composite Materials (2018)

In the present article, static analysis of thin functionally graded micro-plates, based on Kirchhoff plate theory, is investigated. Utilizing the strain gradient theory and principle of minimum total potential energy, governing equations of...

DOAJ Open Access (DOAJ) DOI: 10.1515/secm-2015-0415

Click Chemistry in Materials Science

Weixian Xi, Timothy F. Scott, Christopher J. Kloxin, Christopher N. Bowman • Advanced Functional Materials (2014)

Despite originating only a little more than a decade ago, click chemistry has become one of the most powerful paradigms in materials science, synthesis, and modification. By developing and implementing simple, robust chemistries that do not...

OPENALEX Open Access DOI: https://doi.org/10.1002/adfm.201302847

Materials Science for Engineers

J.C. Anderson, K. D. Leaver, Rees D. Rawlings, Patrick S. Leevers • CRC Press eBooks (2004)

This fifth edition of a successful textbook continues to provide students with an introduction to the basic principles of materials science over a broad range of topics. The authors have revised and updated this edition to include many new ...

OPENALEX DOI: https://doi.org/10.1201/9781315272627

Tailoring the active site for the oxygen evolution reaction on a Pt electrode

Kazuki Iizuka, Tomoaki Kumeda, Kota Suzuki, Hiroo Tajiri et al. • Communications Chemistry (2022)

Electrocatalytic oxygen evolution is a key reaction for water splitting, but the detailed atomic structures of single-crystal electrodes under cycling conditions are still not fully understood. Here, the authors study the oxygen evolution a...

DOAJ Open Access (DOAJ) DOI: 10.1038/s42004-022-00748-7

Effect of Welding Heat Input on Microstructure and Low-Temperature Toughness of Laser-Arc Hybrid Welded Super-Duplex Stainless-Steel Joints

Shuaimou Zhang, Liangliang Bao, Junhao Sun • Metals (2026)

This paper studies the effect of welding heat input on microstructure and low-temperature toughness of laser-arc hybrid welded (LAHW) SAF2507 super-duplex stainless-steel (SDSS) joints. Heat input was adjusted from 0.204 to 0.407 kJ/mm by c...

DOAJ Open Access (DOAJ) DOI: 10.3390/met16070787

The first observation of Ni nanoparticle exsolution from YSZ and its application for dry reforming of methane

Sangwook Joo, Chaehyun Lim, Ohhun Kwon, Linjuan Zhang et al. • Materials Reports: Energy (2021)

Ni nanocatalysts produced through exsolution have shown strong resistance to particle sintering and carbon coking in a beneficial dry reforming of methane (DRM) reaction utilizing greenhouse gases such as CH4 and CO2. However, most of the e...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.matre.2021.100021

Improvement in energy absorption properties of aluminum foams by designing pore-density distribution

Fateme Hassanli, Mohammad Hossein Paydar • Journal of Materials Research and Technology (2021)

In the present work, effect of structural design on the mechanical properties of aluminum foams was studied. Aluminum foams with a relative density in the range of 0.28–0.48 with uniform and graded pore frequency were fabricated through pow...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2021.06.073

Speciation of Ruthenium(III) Chloro Complexes in Hydrochloric Acid Solutions and Their Extraction Characteristics with an Amide-Containing Amine Compound

Tomoya Suzuki, Takeshi Ogata, Mikiya Tanaka, Tohru Kobayashi et al. • Metals (2018)

The refining of platinum group metals is based mainly on solvent extraction methods, whereas Ru is selectively recovered by distillation as RuO4. Replacement of distillation by extraction is expected to simplify the purification process. To...

DOAJ Open Access (DOAJ) DOI: 10.3390/met8070558

Graph neural networks for materials science and chemistry

Patrick Reiser, Marlen Neubert, André Eberhard, Luca Torresi et al. • Communications Materials (2022)

Machine learning plays an increasingly important role in many areas of chemistry and materials science, being used to predict materials properties, accelerate simulations, design new structures, and predict synthesis routes of new materials...

OPENALEX cc-by DOI: https://doi.org/10.1038/s43246-022-00315-6 PMC: 9702700

Prevalence of malaria infection and factors associated among HIV-infected adult patients attending HIV care and treatment clinic at Kitete regional referral hospital in Tabora region, Tanzania: a cross-sectional study

Hamad Nnimbo, Doreen Kamori, Nsiande Lema, Abdallah Mohamed • Bulletin of the National Research Centre (2023)

Abstract Background HIV and malaria are serious public health concerns, particularly in Tanzania. HIV-infected individuals are more likely to get malaria and its complications. However, data on the interaction of the two diseases in Tanzani...

DOAJ Open Access (DOAJ) DOI: 10.1186/s42269-023-01141-7

Goldenhar syndrome: a cause of secondary immunodeficiency?

De Golovine Serge, Wu Shuya, Hunter Jill V, Shearer William T • Allergy, Asthma & Clinical Immunology (2012)

Abstract Goldenhar syndrome (GS) results from an aberrant development of the 1st and 2nd branchial arches. There is a wide range of clinical manifestations, the most common being microtia, hemifacial microsomia, epibulbar dermoids and verte...

DOAJ Open Access (DOAJ) DOI: 10.1186/1710-1492-8-10

Cold storage of human precision-cut lung slices in TiProtec preserves cellular composition and transcriptional responses and enables on-demand mechanistic studies

M. Camila Melo-Narvaez, Fee Gölitz, Eshita Jain, Janine Gote-Schniering et al. • Respiratory Research (2025)

Abstract Background Human precision-cut lung slices (hPCLS) are a unique platform for functional, mechanistic, and drug discovery studies in the field of respiratory research. However, tissue availability, generation, and cultivation time r...

DOAJ Open Access (DOAJ) DOI: 10.1186/s12931-025-03132-w