Reset
Showing 20 of 692 academic articles

Effect of early and late post emergence herbicides on weed suppression, crop injury, and biomass yield of industrial hemp in semiarid conditions

Preetaman Bajwa, Rupinder Saini, Sukhbir Singh, Jasleen Makkar et al. • Agrosystems, Geosciences & Environment (2025)

Abstract Industrial hemp is receiving attention for its numerous benefits, particularly in the fiber industry. Weed competition is a primary concern for hemp cultivation, causing reduced yields and inferior‐quality fiber. However, little is...

DOAJ Open Access (DOAJ) DOI: 10.1002/agg2.70078

Evaluation of eco-efficient geopolymer using chamotte and waste glass-based alkaline solutions

Beatryz C. Mendes, Leonardo G. Pedroti, Carlos Maurício F. Vieira, José Maria F. Carvalho et al. • Case Studies in Construction Materials (2022)

Geopolymers are binder materials that can be an alternative to replace Portland cement. They are considered less aggressive to the environment because of the lower emission of CO2 and use of energy in their production chain. This work aimed...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.cscm.2021.e00847

Formulation, characterization, and valorization of the antioxidant, antibiofilm, and anti-adhesion potentials of a clove essential oil nanoemulsion

Enis Ben Bnina, Jihen Missaoui, Mohamed Firas Gannouni, Lotfi Achour et al. • OpenNano (2026)

Food safety and control are fundamental public health issues that maintain consumer confidence and protection. This design (management) requires monitoring production, processing, and conservation processes while limiting microbiological, c...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.onano.2026.100286

Characteristics of Industrial Design

Zhang Jian-fen • Journal of Zhejiang Textile & Fashion Vocational College (2005)

In modem society, industrial design is not only the design of product shape or an activity a design can fulfill alone, it is an activity that needs the cooperation of manufacturing departments. Through studying, analyzing and feeding back t...

OPENALEX

Industrial Design as a Profession

J. Gordon Lippincott • College Art Journal (1945)

It is interesting to compare industrial design with a much older profession that is somewhat similar in basic requirements: architecture. The industrial designer, just before the war, was designing more merchandise in dollar volume than the...

OPENALEX DOI: https://doi.org/10.1080/15436322.1945.10795107

Circular Economy in Industrial Design Research: A Review

Kirsten van Dam, Luca Simeone, Duygu Keskin, Brian Baldassarre et al. • Sustainability (2020)

In the past decades, industrial design practice and research have focused extensively on how to optimize production and consumption, as a way to prevent negative environmental impacts, such as resource depletion, pollution, and excessive wa...

OPENALEX cc-by DOI: https://doi.org/10.3390/su122410279

Association of mitochondrial DNA polymorphisms and/or haplogroups with elite Japanese athlete status

Noriyuki Fuku, Eri Mikami, Masashi Tanaka • Journal of Physical Fitness and Sports Medicine (2013)

A number of familial and twin studies have assessed the relative contribution of genetic and environmental factors to physical performance or its-related traits and have estimated that there is a significant genetic component to their pheno...

DOAJ Open Access (DOAJ) DOI: 10.7600/jpfsm.2.17

Microstructure and corrosion behavior of SLM–Ti6Al4V with different fabrication angles in F−-containing solutions

Yao WANG, Xiao-ying YAN, Cheng MAN, Hong-wei ZHANG et al. • 工程科学学报 (2021)

Selective laser fusion (SLM) is an emerging 3D printing technology that can greatly shorten the processing cycle and reduce the production cost of medical implants, thus offering broad prospects for application in the biomedical field. In a...

DOAJ Open Access (DOAJ) DOI: 10.13374/j.issn2095-9389.2020.09.29.001

The Evolution of COVID-19 Transmission with Superspreaders Class under Classical and Caputo Piecewise Operators: Real Data Perspective from India, France, and Italy

Shabir Ahmad, Salma Haque, Khalid Ali Khan, Nabil Mlaiki • Fractal and Fractional (2023)

In this study, we analyze the transmission of the COVID-19 model by using a piecewise operator in the classical Caputo sense. The existence along with the uniqueness of the solution of the COVID-19 model under a piecewise derivative is pres...

DOAJ Open Access (DOAJ) DOI: 10.3390/fractalfract7070501

Materials Science Foundations

• Materials science foundations (2016)

Foundations of Materials Science and Engineering (FoMSE) is the successor journal of the former Materials Science Foundations (monograph series) Materials Science Foundations (monograph series) is the periodical edition which consists of se...

OPENALEX DOI: https://doi.org/10.4028/www.scientific.net/msfo

Big data and machine learning for materials science

Jose Fernando Rodrigues Junior, Larisa Florea, Maria Cristina Ferreira de Oliveira, Dermot Diamond et al. • Discover Materials (2021)

Herein, we review aspects of leading-edge research and innovation in materials science that exploit big data and machine learning (ML), two computer science concepts that combine to yield computational intelligence. ML can accelerate the so...

OPENALEX cc-by DOI: https://doi.org/10.1007/s43939-021-00012-0 PMC: 8054236

Extraction of nano-crystalline cellulose for development of aerogel: Structural, morphological and antibacterial analysis

Yash Vishnoi, Alok Kumar Trivedi, M.K. Gupta, Harinder Singh et al. • Heliyon (2024)

In the present decades, nanocellulose has been very popular in the field of nanotechnology and is receiving much attention from researchers because of its advantageous physicochemical properties, high aspect ratio, and high specific strengt...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.heliyon.2023.e23846

A nanotechnology-based approach to enhance caraway (Carum carvi L.) productivity, chemical, biochemical and essential oil under salinity stress

El-Sayed Mohamed El-Mahrouk, Amira Mohamed Tayaa, Mohamed Kadry Gaber, Ekramy Abdel-Moatamed Atef et al. • Frontiers in Plant Science (2026)

Salt stress is an abiotic stressor that adversely affects the growth and productivity of caraway, an important aromatic plant. A randomized complete split-plot design was used to determine the nanoparticles of zinc oxide (ZnO NPs) effects a...

DOAJ Open Access (DOAJ) DOI: 10.3389/fpls.2026.1814332

Rhizospheric Microbes and Nanoparticles Synergize to Enhance Plant Immune Responses

Mohammad Nazrul Islam Bhuiyan, Md. Saidur Rahman, Md. Mahfuzur Rahman, Barun Kanti Saha • Plant-Environment Interactions (2026)

ABSTRACT Sustainable crop production increasingly requires innovative strategies that can enhance plant resilience while reducing dependence on synthetic agrochemicals. Recent advances in nanotechnology and rhizosphere microbiome research h...

DOAJ Open Access (DOAJ) DOI: 10.1002/pei3.70183

Nanotechnology

Matthew P. Sullivan, Kevin Jude McHale, Javad Parvizi, Samir D. Mehta • The Bone & Joint Journal (2014)

Nanotechnology is the study, production and controlled manipulation of materials with a grain size < 100 nm. At this level, the laws of classical mechanics fall away and those of quantum mechanics take over, resulting in unique behaviour of...

OPENALEX DOI: https://doi.org/10.1302/0301-620x.96b5.33606

Nanotechnology and Agroecosystem

CHINNAMUTHU C.R, Murugesa Boopathi P. • Madras Agricultural Journal (2009)

Nanotechnology is working with the smallest possible particles which raise hopes for improving agricultural productivity through encountering problems unsolved conventionally. Improvement of crops in agriculture is a continuous process. Bre...

OPENALEX cc-by DOI: https://doi.org/10.29321/maj.10.100436

Cement and Concrete Nanoscience and Nanotechnology

Laïla Raki, J.J. Beaudoin, Rouhollah Alizadeh, Jon M. Makar et al. • Materials (2010)

Concrete science is a multidisciplinary area of research where nanotechnology potentially offers the opportunity to enhance the understanding of concrete behavior, to engineer its properties and to lower production and ecological cost of co...

OPENALEX cc-by DOI: https://doi.org/10.3390/ma3020918

Nanotechnology for parasitic plant control

Alejandro Pérez‐de‐Luque, Diego Rubiales • Pest Management Science (2009)

The field of nanotechnology opens up novel potential applications for agriculture. Nanotechnology applications are already being explored and used in medicine and pharmacology, but interest for use in crop protection is just starting. The d...

OPENALEX DOI: https://doi.org/10.1002/ps.1732