Reset
Showing 20 of 2,192 academic articles

Optimal Deployment of Dynamic Wireless Charging Lanes for Electric Vehicles considering the Battery Charging Rate

Jun Du, Mingyang Pei, Bin Jia, Pan Wu • Journal of Advanced Transportation (2022)

Dynamic wireless charging (DWC) technology enables the charging of electric vehicles (EVs) en route without the need for stopping on long-distance trips. Based on DWC technology, a dynamic wireless charging system (DWCS) concept is proposed...

DOAJ Open Access (DOAJ) DOI: 10.1155/2022/6428887

Extrapolative prediction in multiphase flow pipelines: a multi-fidelity surrogate approach with stacking ensemble

Pengcheng Cao, Kai Wang, Ting Zhang, Lihui Yang • Engineering Applications of Computational Fluid Mechanics (2026)

Accurate extrapolation of multiphase flow behaviour in offshore pipelines is hindered by limited field data, simulator bias, and strong nonlinearities. A multi-fidelity surrogate approach with stacking ensemble is proposed to address these ...

DOAJ Open Access (DOAJ) DOI: 10.1080/19942060.2026.2646081

Energy characterization of residential and office buildings in a tropical location

Jorge Cárdenas-Rangel, German Osma-Pinto, Julián Jaramillo-Ibarra • Heliyon (2023)

Governments have established regulations to reduce energy consumption and polluting gas emissions from buildings. In Colombia, the government issued Resolution 0549 in 2015, a regulation that imposed savings percentages on different types o...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.heliyon.2023.e16048

E2ETrADS: end-to-end transformer based autonomous driving system for adverse weather conditions

Sotirios Spanogianopoulos, Kenan Ahiska • European Transport Research Review (2026)

Abstract Adverse weather conditions, such as snow, heavy rain, fog, or limited illumination, pose significant challenges for autonomous vehicles (AVs) by degrading sensor reliability. This paper introduces E2ETrADS, an end-to-end transforme...

DOAJ Open Access (DOAJ) DOI: 10.1186/s12544-026-00793-6

Bayesian ANN-Based Prediction and Multi-Objective Optimization of Tribological Behavior in Magnesium Alloy AZ91D at Elevated Temperature Using Pareto GA

Beniyel Muthuraj, Sivapragash Murugesan, Rajesh Rajamony, Michael Thomas Rex Francis • Materials Research (2025)

This study uses an artificial neural network (ANN) model to predict the wear rate and friction coefficient of the magnesium alloy AZ91D, based on experimental data from a pin-on-disc tribometer. The model includes three essential process pa...

DOAJ Open Access (DOAJ) DOI: 10.1590/1980-5373-mr-2025-0388

Development of Power-to-X Catalytic Processes for CO<sub>2</sub> Valorisation: From the Molecular Level to the Reactor Architecture

Luis F. Bobadilla, Lola Azancot, Ligia A. Luque-Álvarez, Guillermo Torres-Sempere et al. • Chemistry (2022)

Nowadays, global climate change is likely the most compelling problem mankind is facing. In this scenario, decarbonisation of the chemical industry is one of the global challenges that the scientific community needs to address in the immedi...

DOAJ Open Access (DOAJ) DOI: 10.3390/chemistry4040083

Identify the causal pattern of sustainability principles Environment Based on Leed Regulations with Emphasis on Traditional Iranian Architecture (Case Study: Qom City)

Hassan Haji Amiri, Arash Seghfi Asl, Mehdi Ashjaie • تحقیقات کاربردی علوم جغرافیایی (2024)

The question of resource constraints is an issue for all industrialized, developed and developing countries. Therefore, saving on fossil energy consumption and sustainable development have become very important and common issues internation...

DOAJ Open Access (DOAJ)

Upcycling clarified and decolorized red beet waste into a sustainable glucose syrup alternative for ice cream production

Tahra ElObeid, İlyas Atalar, Burcu Tüzün, Ibrahim Palabiyik et al. • Food Chemistry: X (2026)

This study aimed to determine the potential use of the liquid waste (RBLW, ∼12.0°Bx) generated after pigment extraction from industrial red beet (RB) (Beta vulgaris L.) juice concentrate during the production of RB extract powder as an alte...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.fochx.2026.104073

Higher Education, Innovation, and Regional Economic Development in Kazakhstan: Panel-Data and Difference-in-Differences Evidence, 2010–2024

Aigerim Lambekova, Azamat Zhanseitov, Yuliya Sayfullina, Valentina Berezyuk et al. • Economies (2026)

This study examines the relationship between higher education development, innovation capacity, and regional economic performance across Kazakhstan’s regions during the 2010–2024 period. The analysis is motivated by the growing role of high...

DOAJ Open Access (DOAJ) DOI: 10.3390/economies14070261

Incorrect Ternary Liquid–Liquid Equilibria Description versus Extractor Design Simulation

E. Graczová, P. Steltenpohl, J. Labovský • Chemical Engineering Transactions (2015)

The presented study focuses on the separation of aromatics from aliphatic hydrocarbons by liquid-phase extraction using ionic liquids. The aim of this study was to show the impact of incorrect description of liquid–liquid equilibria of the ...

DOAJ Open Access (DOAJ) DOI: 10.3303/CET1545328

Determination of orthodontic bracket and tooth adaptation using an X-ray micro-computer tomography scanner

Yaseen Fakir, BChD, MSc, Colm Keanly, Riaan Mulder, BChD, MSC, PhD • MethodsX (2020)

The determination of the orthodontic brackets’ adaptation to the curvatures of teeth is a difficult topic to study. The complexity arise due to the different designs of their fitting surfaces, margins and curvatures of orthodontic brackets....

DOAJ Open Access (DOAJ) DOI: 10.1016/j.mex.2020.100851

THE OPTIMIZATION OF PLUSH YARNS BULKING PROCESS

VINEREANU Adam, POTOP Georgeta-Lidia, LEON Ana-Lacramioara, VINEREANU Elena • Annals of the University of Oradea: Fascicle of Textiles, Leatherwork (2014)

This paper presents the experiments that were conducted on the installation of continuous bulking and thermofixing “SUPERBA” type TVP-2S for optimization of the plush yarns bulking process. There were considered plush yarns Nm 6.5/2, made o...

DOAJ Open Access (DOAJ)

The impact of the consistency evaluation policy of generic drugs on the integration of innovation chain and industrial chain in the pharmaceutical manufacturing industry

Yanqing Xie, Wenjing Zhang • Frontiers in Public Health (2026)

IntroductionThe Consistency Evaluation Policy of Generic Drugs is a major quality-oriented regulatory reform in China’s pharmaceutical manufacturing industry. Whether and how this policy facilitates the integration of the innovation chain a...

DOAJ Open Access (DOAJ) DOI: 10.3389/fpubh.2026.1791110