Reset
Showing 20 of 387 academic articles

Creep behaviors and constitutive model of transversely isotropic rocks

WANG Zhe-chao 1, 2, ZONG Zhi 1, QIAO Li-ping 1, 2, LI Wei1, LIU Jie 1 • Yantu gongcheng xuebao (2018)

The bedded carbonaceous slate exhibits transversely isotropic creep properties. The creep behaviors of carbonaceous slate are studied using the triaxial compressive creep tests on horizontal bedding specimens and vertical bedding specimens....

DOAJ Open Access (DOAJ) DOI: 10.11779/CJGE201807008

Evaluation of experimentally observed asymmetric distributions of hardness, strain and residual stress in cold drawn bars by FEM-simulation

Juliana Zottis, Carla Adriana Theis Soares Diehl, Alexandre da Silva Rocha • Journal of Materials Research and Technology (2018)

The purpose of this paper is to investigate the correlation of strain and hardness parameters in a drawing process chain of an SAE 1045 steel bar. The present work discusses the application of the experimental and numerical method of analys...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2018.01.004

Metabolomic Profiling of Bile Acids in an Experimental Model of Prodromal Parkinson’s Disease

Stewart F. Graham, Nolwen L. Rey, Zafer Ugur, Ali Yilmaz et al. • Metabolites (2018)

For people with Parkinson’s disease (PD), considered the most common neurodegenerative disease behind Alzheimer’s disease, accurate diagnosis is dependent on many factors; however, misdiagnosis is extremely common in the prodrom...

DOAJ Open Access (DOAJ) DOI: 10.3390/metabo8040071

Adsorption and Corrosion Inhibition Behaviour of Oil Extracted from Moringa peregrina leaves for Carbon Steel in Acidic Media: Experimental and Computational Studies

Ismat H. Ali, Mohammad I. Khan, Alhafez M. Alraih, Mohammed K. Almesfer et al. • International Journal of Electrochemical Science (2021)

The current research aimed at investigating the potential corrosion inhibitory effect of essential oil extracted from Moringa peregrina leaves on carbon steel in acidic conditions. Gas chromatography (GC) and scanning electron microscope (S...

DOAJ Open Access (DOAJ) DOI: 10.20964/2021.08.49

A study on high-shear and low-pressure grinding with body-armour-like abrasive tool (BAAT) for Inconel 718 superalloys

Yebing Tian, Chengjin Tian, Sohini Chowdhury, Jinguo Han et al. • Journal of Materials Research and Technology (2023)

A novel body-armour-like abrasive tool (BAAT) was developed for the high-shear and low-pressure grinding of super alloys with an aim to reduce the ratio of normal force to tangential force. A composite process model was developed based on f...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2023.04.205

Development, modelling and optimization of process parameters on the tensile strength of aluminum, reinforced with pumice and carbonated coal hybrid composites for brake disc application

Tanimu Kogi Ibrahim, Danjuma Saleh Yawas, Julius Thaddaeus, Bashar Danasabe et al. • Scientific Reports (2024)

Abstract This study focuses on optimizing double stir casting process parameters to enhance the tensile strength of hybrid composites comprising aluminum alloy, brown pumice, and coal ash, intended for brake disc applications. Analytical te...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-024-67476-x

Efficient tuna detection and counting with improved YOLOv8 and ByteTrack in pelagic fisheries

Yuanchen Cheng, Zichen Zhang, Yuqing Liu, Jie Li et al. • Ecological Informatics (2025)

Accurate estimation of tuna catch is crucial for effective pelagic fishery management and resource conservation. However, existing manual counting methods suffer from issues such as low accuracy and poor timeliness, highlighting the urgent ...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.ecoinf.2025.103116

STEM approach and computer science impact the metaphorical thinking of Indonesian students’

Farida Farida, Nanang Supriadi, Siska Andriani, Dona Dinda Pratiwi et al. • RED. Revista de Educación a Distancia (2022)

Metaphorical thinking is important in improving the formation and discovery of learning ideas in the 21st-century. However, the metaphorical thinking of Indonesian students is below the international average in terms of cognitive process, a...

DOAJ Open Access (DOAJ) DOI: 10.6018/red.493721

CFD Simulation of the Slot Jet Impingement Heat Transfer Process and Application to a Temperature Control System for Galvanizing Line of Metal Band

Stefano Cademartori, Carlo Cravero, Martino Marini, Davide Marsano • Applied Sciences (2021)

A CFD model to simulate the cooling technique trough slot jet impingement has been developed. Such a technique has been tested on an existing vertical galvanizing industrial line, which initially envisaged a round jet configuration, the sub...

DOAJ Open Access (DOAJ) DOI: 10.3390/app11031149

Construction of Integrated Platform for Eco-Sustainable Tourism and Marketing in Southeast Asia Based on Machine Learning

Yi-Tui Chen, Yi-Min Li, Tzu-Wen Tseng • International Transactions on Electrical Energy Systems (2022)

Southeast Asia is one of the most popular tourist destinations in the world, and its tourism model is mainly based on ecological and sustainable tourism characteristics. It is a special practical exploration of this region. However, with th...

DOAJ Open Access (DOAJ) DOI: 10.1155/2022/6442618

A Graph Neural Networks-Based Learning Framework With Hyperbolic Embedding for Personalized Tag Recommendation

Chunmei Zhang, Aoran Zhang, Li Zhang, Yonghong Yu et al. • IEEE Access (2024)

Learning high-quality representations of users, items, and tags from historical interactive data is crucial for personalized tag recommendation (PTR) systems. Currently, most PTR models are committed to learning representations from first-o...

DOAJ Open Access (DOAJ) DOI: 10.1109/ACCESS.2023.3347249

Dietary antioxidants and lifespan: Relevance of environmental conditions, diet, and genotype of experimental models

Alfonso Varela-López, José M. Romero-Márquez, María D. Navarro-Hortal, César L. Ramirez-Tortosa et al. • Experimental Gerontology (2023)

The rise of life expectancy in current societies is not accompanied, to date, by a similar increase in healthspan, which represents a great socio-economic problem. It has been suggested that aging can be manipulated and then, the onset of a...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.exger.2023.112221

Effective analysis of neurotoxicity and mechanisms of dioctyl terephthalate using network toxicology

Hao Tang, Ting Qin, Zhiwen Yan, Changqing Li et al. • Frontiers in Neuroscience (2026)

ObjectiveDioctyl terephthalate (DOTP), a widely used plasticizer in food packaging and environmental materials, has raised concerns regarding its potential impact on human health. This study aims to investigate the neurotoxicity-related mec...

DOAJ Open Access (DOAJ) DOI: 10.3389/fnins.2026.1783807

The emission factor of volatile isoprenoids: stress, acclimation, and developmental responses

Ü. Niinemets, A. Arneth, U. Kuhn, R. K. Monson et al. • Biogeosciences (2010)

The rate of constitutive isoprenoid emissions from plants is driven by plant emission capacity under specified environmental conditions (<i>E</i><sub>S</sub>, the emission factor) and by responsiveness of the emissio...

DOAJ Open Access (DOAJ) DOI: 10.5194/bg-7-2203-2010

Stress-dilatancy properties for fiber-reinforced sand

KONG Yu-xia , SHENG Fei-fan , WANG Hui-juan • Yantu gongcheng xuebao (2018)

It is observed that randomly distributed polypropylene fibers act to interlock particles and thus improve the mechanical behavior of the reinforced soils. The polypropylene fiber inclusion clearly increases the shear strength of soils, and ...

DOAJ Open Access (DOAJ) DOI: 10.11779/CJGE201812012

Underground Gas Storage Process Optimisation with Respect to Reservoir Parameters and Production Equipment

Vladislav Brkić, Ivan Zelenika, Petar Mijić, Igor Medved • Energies (2021)

The storage of natural gas in geological structures such as depleted fields, aquifers and salt caverns plays an important role in a gas supply system as it balances the fluctuation of gas demand and price. Hydraulic loss due to fluid flow t...

DOAJ Open Access (DOAJ) DOI: 10.3390/en14144324

Optimization of Metal Inert Gas Welding Process during Joining of Structural Steels- An Overview

Misra Ravindra Kumar, Porwal Rajesh Kumar • E3S Web of Conferences (2020)

Metal Inert Gas welding is a fast, reliable and cost effective technique for joining of different ferrous materials and steels used in the construction of large structures like Fe410WA, IS2062, SS304, AISI1040 and AISI316 etc. To obtain bet...

DOAJ Open Access (DOAJ) DOI: 10.1051/e3sconf/202018401028