Reset
Showing 20 of 161 academic articles

THE OPTIMIZATION OF PLUSH YARNS BULKING PROCESS

VINEREANU Adam, POTOP Georgeta-Lidia, LEON Ana-Lacramioara, VINEREANU Elena • Annals of the University of Oradea: Fascicle of Textiles, Leatherwork (2014)

This paper presents the experiments that were conducted on the installation of continuous bulking and thermofixing “SUPERBA” type TVP-2S for optimization of the plush yarns bulking process. There were considered plush yarns Nm 6.5/2, made o...

DOAJ Open Access (DOAJ)

Manufacturing of a New Generations from the Recycled AL Scrape Reinforced with AL2O3 - GNS Composite Powder by Vortex Technique for Automotive Spare Parts

Fathei Nouh, Omayma El kady, Sabry abdel aziz • International Journal of Industry and Sustainable Development (2024)

This research addresses the urgent challenges facing the materials and metallurgical industries, driving manufacturers to seek innovative solutions for material recycling. Aluminum scrape in used to manufacture a composite material with a h...

DOAJ Open Access (DOAJ) DOI: 10.21608/ijisd.2024.302067.1074

Functionalising Collagen-Based Scaffolds With Platelet-Rich Plasma for Enhanced Skin Wound Healing Potential

Ronaldo J. F. C. do Amaral, Ronaldo J. F. C. do Amaral, Ronaldo J. F. C. do Amaral, Noora M. A. Zayed et al. • Frontiers in Bioengineering and Biotechnology (2019)

Porous collagen-glycosaminoglycan (collagen-GAG) scaffolds have shown promising clinical results for wound healing; however, these scaffolds do not replace the dermal and epidermal layer simultaneously and rely on local endogenous signaling...

DOAJ Open Access (DOAJ) DOI: 10.3389/fbioe.2019.00371

Continuous monitoring biosensors for advanced healthcare and environmental applications: challenges, material innovations and future directions

Kiran Kumar Amireddy, P. V. R. Ravindra Reddy, C. Nagendranatha Reddy, P. Prabhakar Reddy • Frontiers in Sensors (2026)

This review critically discusses the development of continuous monitoring biosensors and the technological developments that have facilitated the transition from one-off or periodic measurement sensors to longer-term, connected and autonomo...

DOAJ Open Access (DOAJ) DOI: 10.3389/fsens.2026.1968999

An Introduction to Quantum Computing Algorithms

A. O. Pittenger • Birkhäuser Boston eBooks (2000)

In 1994 Peter Shor [65] published a factoring algorithm for a quantum computer that finds the prime factors of a composite integer N more efficiently than is possible with the known algorithms for a classical com­ puter. Since the difficult...

OPENALEX DOI: https://doi.org/10.1007/978-1-4612-1390-1

GEM: a generalized event monitoring language for distributed systems

Masoud Mansouri-Samani, Morris S. Sloman • Distributed Systems Engineering (1997)

Event-based monitoring is critical for managing and debugging networks and distributed systems. This paper presents GEM - an interpreted generalized event monitoring language. It allows high-level, abstract events to be specified in terms o...

OPENALEX Open Access DOI: https://doi.org/10.1088/0967-1846/4/2/004

Tailoring structural properties of carbon via implanting optimal co nanoparticles in n‐rich carbon cages toward high‐efficiency oxygen electrocatalysis for rechargeable zn‐air batteries

Jie Yu, Yawen Dai, Zhenbao Zhang, Tong Liu et al. • Carbon Energy (2022)

Abstract Rational construction of carbon‐based materials with high‐efficiency bifunctionality and low cost as the substitute of precious metal catalyst shows a highly practical value for rechargeable Zn‐air batteries (ZABs) yet it still rem...

DOAJ Open Access (DOAJ) DOI: 10.1002/cey2.171

Lipid peroxidation and DNA oxidation caused by dental filling materials

Mehmet Yıldız, Hamit Hakan Alp, Pınar Gül, Nuri Bakan et al. • Journal of Dental Sciences (2017)

Background/purpose: The two direct dental restorative materials most commonly used today are silver-mercury amalgam and resin-based composites. The purpose of this study was to examine the effects of these two restorative materials and subs...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jds.2017.02.002

Materials Science

(2025)

Materials science has always occupied an extremely high position in the human development process. As we explore the oceans of stars, various industries have put forward more stringent requirements for the performance of materials, forcing ...

OPENALEX DOI: https://doi.org/10.5772/intechopen.1002828

Preparation and electromagnetic absorbing properties of TiC/Ni powders

ZHANG Sen, LIU Yi, SU Xiaolei, LI Yunyu et al. • Xi'an Gongcheng Daxue xuebao (2022)

In order to improve the microwave absorption performance of TiC powder, TiC/Ni composite powder was prepared by coating nickel particles with mass fraction of 10%, 20% and 30% on the surface of TiC by typical coarsening and sensitizing elec...

DOAJ Open Access (DOAJ) DOI: 10.13338/j.issn.1674-649x.2022.01.005

Effects of Annealing and Deformation on Sagging Resistance of a Hot-Rolled, Four-Layered Al Alloy Clad Sheet

Minglong Kang, Li Zhou, Yunlai Deng, Jinqin Lei • Advances in Materials Science and Engineering (2021)

Multilayer brazeable aluminum alloy sheet is prone to collapse during high-temperature brazing process. The sagging resistance of the aluminum composite sheet needs to be further improved for quality control. Effects of annealing and rate o...

DOAJ Open Access (DOAJ) DOI: 10.1155/2021/6625548

Material Science and Engineering

Ping Chen • CRC Press eBooks (2016)

Material Science and Engineering presents novel and fundamental advances in the field of material science and engineering. This proceedings collects the comprehensive and worldwide research results on Metallic Materials and Applications, Ch...

OPENALEX DOI: https://doi.org/10.1201/b21118