Home »
Academic Articles & Research Papers
Showing 20 of 3,721 academic articles
Condro Kartiko • Jurnal Nasional Teknik Elektro dan Teknologi Informasi
(2019)
The rapid growth of the world of information technology has an impact on the spread of the amount of software. Software maintenance is needed to support the quality of software. Software quality can be measured in terms of product and proce...
DOAJ
Open Access (DOAJ)
DOI: 10.22146/jnteti.v8i1.485
Aghil Asadi, Mohsen Najafi, Hossien Bouhnedi, Mehdi Haji Bagherian • علوم و تکنولوژی پلیمر
(2021)
Hypothesis: The volume of studies conducted on biopolymeric materials emphasizes the high-consumption of polymers in biomaterial fields, especially in cosmetics industry which must be resistant to different kinds of microorganisms and bacte...
DOAJ
Open Access (DOAJ)
DOI: 10.22063/jipst.2021.1779
Böser Sebastian • EPJ Web of Conferences
(2013)
Even with an accumulated data set from an integrated six years of lifetime from the Auger experiment, no point sources of charged cosmic rays have be identified at the highest energies. Significantly increased apertures such as promised by ...
DOAJ
Open Access (DOAJ)
DOI: 10.1051/epjconf/20125211003
Guoping Ding, Yixuan Zhang, Yong Zhu • Advanced Composites Letters
(2019)
The advantages of carbon fiber-reinforced plastic (CFRP) box girders include good bending resistance, lightweight and high strength. Therefore, they are widely used in aerospace, rail transit, and other fields. When the CFRP box girder is s...
DOAJ
Open Access (DOAJ)
DOI: 10.1177/2633366X19891171
Nnamdi C. Aronwora, Chibuzo Nwabufo Okwuosa, Jang-Wook Hur • IEEE Access
(2026)
The rate of capacity fade in a lithium-ion battery following a transition to a new discharge current is widely assumed to equal that of a battery that has always operated at the destination current, an implicit premise referred to here as l...
DOAJ
Open Access (DOAJ)
DOI: 10.1109/ACCESS.2026.3732470
Md. Jisan Mahmud, Ahmed Imtiaz Rais, Md. Rakib Hossain, Sumon Saha • Heliyon
(2022)
The current study investigates conjugate mixed convection heat transmission with internal heat generation in a square enclosure driven by a sliding lid and a solid cylinder with a heat-conducting surface at its center. The enclosure has a s...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.heliyon.2022.e11968
Shuzhi Su, Penglian Gao, Yanmin Zhu, Xingzhu Liang et al. • IEEE Access
(2021)
In multi-view learning, massive literature is devoted to exploring the intrinsic structure between cross-views. It is well known that canonical correlation analysis (CCA) is a conventional multi-view learning method, which considers the cor...
DOAJ
Open Access (DOAJ)
DOI: 10.1109/ACCESS.2021.3118023
Yebing Tian, Chengjin Tian, Sohini Chowdhury, Jinguo Han et al. • Journal of Materials Research and Technology
(2023)
A novel body-armour-like abrasive tool (BAAT) was developed for the high-shear and low-pressure grinding of super alloys with an aim to reduce the ratio of normal force to tangential force. A composite process model was developed based on f...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.jmrt.2023.04.205
Vu Duy Quang, Ngo Van Hien • Vietnam Journal of Mechanics
(2011)
In this paper, we present a method, which is based on hybrid automata and Real-Time Unified Modeling Language (UML) to analyze and design the control parts of mechatronic systems with input or output events and signals in order to effective...
DOAJ
Open Access (DOAJ)
DOI: 10.15625/0866-7136/33/3/211
Donghwan Song, Adrian Matias Chung Baek, Jageon Koo, Moise Busogi et al. • Applied Sciences
(2020)
Over the past decades, additive manufacturing has rapidly advanced due to its advantages in enabling diverse material usage and complex design production. Nevertheless, the technology has limitations in terms of quality, as printed products...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/app10248951
Syed Bustan Fatima Warsi, Biranchi Panda, Pankaj Biswas • Developments in the Built Environment
(2023)
3D Concrete Printing (3DCP) is a growing field of sustainable technology that offers an avenue for rapid industrialisation of the construction industry. Over the years, many non-structural elements have been fabricated by 3D printing, thus ...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.dibe.2023.100295
Stilianos Fodelianakis, Alexander Lorz, Adriana Valenzuela-Cuevas, Alan Barozzi et al. • Nature Communications
(2019)
Fodelianakis et al. examine the role of immigration and selection as the means of community homogenisation in a bacterial metacommunity. They confirmed the role of immigration in homogenisation, even when immigration was four times slower t...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41467-019-09306-7
Wuwei Feng, Hongya Chen, Qingping Zou, Di Wang et al. • Energies
(2024)
Wireless monitoring systems for the marine environment are important for rapidly growing subsea developments. The power supply of wireless sensor nodes within the monitoring systems, however, is a major challenge. This study proposes a nove...
DOAJ
Open Access (DOAJ)
DOI: 10.3390/en17040876
Farzana Kastury, Silvia Placitu, John Boland, Ranju R. Karna et al. • Environment International
(2019)
In this study, an in vitro in vivo correlation (IVIVC) between Pb in vitro bioaccessibility (IVBA) and relative bioavailability (RBA) was explored to determine whether the efficacy of Pb immobilization in phosphate amended soils could be pr...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.envint.2019.104967
Mariet Jose, R. Dinesh Raj, M. R. Vinitha, Remya Madhu et al. • Frontiers in Plant Science
(2018)
Fully domesticated rice is considered to have emerged in India at approximately 2000 B.C., although its origin in India remains a contentious issue. The fast-growing 60-days rice strain described in the Vedic literature (1900–500 B.C.) and ...
DOAJ
Open Access (DOAJ)
DOI: 10.3389/fpls.2018.01203
Yong-Min Li, M. Ijaz Khan, Sohail A. Khan, Sami Ullah Khan et al. • Scientific Reports
(2021)
Abstract Entropy optimization in convective viscous fluids flow due to a rotating cone is explored. Heat expression with heat source/sink and dissipation is considered. Irreversibility with binary chemical reaction is also deliberated. Nonl...
DOAJ
Open Access (DOAJ)
DOI: 10.1038/s41598-021-89739-7
Abdo M. Al-Fakih, Madzlan Aziz, Hassan H. Abdallah, Zakariya Y. Algamal et al. • International Journal of Electrochemical Science
(2015)
The inhibition of mild steel corrosion in 1 M HCl by 17 furan derivatives was investigated experimentally using potentiodynamic polarization measurements. The furan derivatives inhibit the mild steel corrosion. The experimental inhibition e...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/S1452-3981(23)06562-8
Ibrahim Abbas, Aboelnour Abdalla, Areej Almuneef, Alaa A. El-Bary • Case Studies in Thermal Engineering
(2025)
This study investigates generalized thermoelastic interaction in porous asphaltic materials subjected to thermal loading, using fractional model with time-delay effects. The framework incorporates the Riemann-Liouville fractional derivative...
DOAJ
Open Access (DOAJ)
DOI: 10.1016/j.csite.2025.106304
J.T. Ferreira, A. Bekker, M. Arashi • Revstat Statistical Journal
(2020)
This paper paves the way when the assumption of normality is challenged within the wireless communications systems arena. Innovative results pertaining to the distributions of quadratic forms and their associated eigenvalue density function...
DOAJ
Open Access (DOAJ)
DOI: 10.57805/revstat.v18i3.299
Oteng Maphane • International Journal of Mathematics and Mathematical Sciences
(2021)
Let Gk,nℂ for 2≤k...
DOAJ
Open Access (DOAJ)
DOI: 10.1155/2021/6687527