Reset
Showing 20 of 100 academic articles

Exact solution for bending analysis of functionally graded micro-plates based on strain gradient theory

Mohammadi Meisam, Iranmanesh Afshin, Naseralavi Seyed Sadegh, Farahmand Hamed • Science and Engineering of Composite Materials (2018)

In the present article, static analysis of thin functionally graded micro-plates, based on Kirchhoff plate theory, is investigated. Utilizing the strain gradient theory and principle of minimum total potential energy, governing equations of...

DOAJ Open Access (DOAJ) DOI: 10.1515/secm-2015-0415

Materials Science for Engineers

J.C. Anderson, K. D. Leaver, Rees D. Rawlings, Patrick S. Leevers • CRC Press eBooks (2004)

This fifth edition of a successful textbook continues to provide students with an introduction to the basic principles of materials science over a broad range of topics. The authors have revised and updated this edition to include many new ...

OPENALEX DOI: https://doi.org/10.1201/9781315272627

The first observation of Ni nanoparticle exsolution from YSZ and its application for dry reforming of methane

Sangwook Joo, Chaehyun Lim, Ohhun Kwon, Linjuan Zhang et al. • Materials Reports: Energy (2021)

Ni nanocatalysts produced through exsolution have shown strong resistance to particle sintering and carbon coking in a beneficial dry reforming of methane (DRM) reaction utilizing greenhouse gases such as CH4 and CO2. However, most of the e...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.matre.2021.100021

Improvement in energy absorption properties of aluminum foams by designing pore-density distribution

Fateme Hassanli, Mohammad Hossein Paydar • Journal of Materials Research and Technology (2021)

In the present work, effect of structural design on the mechanical properties of aluminum foams was studied. Aluminum foams with a relative density in the range of 0.28–0.48 with uniform and graded pore frequency were fabricated through pow...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.jmrt.2021.06.073

Phase formations and microstructures of Ti20Zr15Hf15Ni35Cu15 high-entropy shape memory alloy under different aging conditions

Yen-Ting Chang, Ming-Hao Lee, Ming-Wen Chu, Chih-Hsuan Chen • Materials Today Advances (2022)

The microstructures and phase formations of Ti20Zr15Hf15Ni35Cu15 high entropy shape memory alloy (HESMA) under different aging conditions were investigated in this study. At aging temperatures below 500 °C, a large amount of the H-phase for...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.mtadv.2022.100223

Manufacturing of Hierarchical (Nano-)Composite Structures: Numerical and Experimental Perspectives

Hatim Alotaibi, Constantinos Soutis, Masoud Jabbari • Applied Sciences (2026)

Thermoset polymer nanocomposites have considerable potential to improve the functionality and optimise the performance of composite structures. Such a nanocomposite generally consists of a modified polymer matrix (continuous phase) containi...

DOAJ Open Access (DOAJ) DOI: 10.3390/app162010379

Development and Control of an Innovative Underwater Vehicle Manipulator System

Xinhui Zheng, Qiyan Tian, Qifeng Zhang • Journal of Marine Science and Engineering (2023)

Recently, as humans have become increasingly interested in ocean resources, underwater vehicle-manipulator systems (UVMSs) have played an increasingly important role in ocean exploitation. To realize precise operation in underwater narrow s...

DOAJ Open Access (DOAJ) DOI: 10.3390/jmse11030548

Development and Hybrid Control of an Electrically Actuated Lower Limb Exoskeleton for Motion Assistance

Chao-Feng Chen, Zhi-Jiang Du, Long He, Yong-Jun Shi et al. • IEEE Access (2019)

This paper describes a system design and hybrid control algorithm of an electrically actuated lower limb exoskeleton (LLE). The system design mainly includes three parts: mechanical structure design, actuation system design and sensor syste...

DOAJ Open Access (DOAJ) DOI: 10.1109/ACCESS.2019.2953302

An image based application in Matlab for automated modelling and morphological analysis of insect wings

Shahab Eshghi, Fatemeh Nabati, Shaghayegh Shafaghi, Vahid Nooraeefar et al. • Scientific Reports (2022)

Abstract Despite extensive research on the biomechanics of insect wings over the past years, direct mechanical measurements on sensitive wing specimens remain very challenging. This is especially true for examining delicate museum specimens...

DOAJ Open Access (DOAJ) DOI: 10.1038/s41598-022-17859-9

A lightweight optimization framework for real-time pedestrian detection in dense and occluded scenes

C. Chen, J. Li, J. Li, Z. Shuai et al. • Mechanical Sciences (2025)

Pedestrian detection is one of the most widely applied tasks in industrial computer vision. It encapsulates three core challenges of object detection: detecting small objects, handling heavy occlusion, and balancing speed and accuracy for d...

DOAJ Open Access (DOAJ) DOI: 10.5194/ms-16-877-2025

Potential of machine learning approaches for predicting mechanical properties of spruce wood in the transverse direction

Shuoye Chen, Rei Shiina, Kazushi Nakai, Tatsuya Awano et al. • Journal of Wood Science (2023)

Abstract To predict the mechanical properties of wood in the transverse direction, this study used machine learning to extract the anatomical features of wood from cross-sectional stereograms. Specimens with different orientations of the ra...

DOAJ Open Access (DOAJ) DOI: 10.1186/s10086-023-02096-z

Artificial Neural Network (ANN) Approach to Predict Tensile Properties of Longitudinally Placed Fiber Reinforced Polymeric Composites including Interphase

Sagar Chokshi, Piyush Gohil, Vijay Parmar, Vijaykumar Chaudhary • Mechanics of Advanced Composite Structures (2025)

Machine Learning has become prevalent nowadays for predicting data on the mechanical properties of various materials and is widely used in various polymeric applications. In the present study, Artificial Neural Network (ANN), a computationa...

DOAJ Open Access (DOAJ) DOI: 10.22075/macs.2024.33874.1664

Machine learning in pain research

Jörn Lötsch, Alfred Ultsch • Pain (2017)

1. Introduction Pain and pain chronification are incompletely understood and unresolved medical problems that continue to have a high prevalence.14 It has been accepted that pain is a complex phenomenon.2,32,72 Contemporary methods of compu...

OPENALEX cc-by-nc-nd DOI: https://doi.org/10.1097/j.pain.0000000000001118 PMC: 5895117

Adaptive habitat biogeography-based optimizer for optimizing deep CNN hyperparameters in image classification

Jiayun Xin, Mohammad Khishe, Diyar Qader Zeebaree, Laith Abualigah et al. • Heliyon (2024)

Deep Convolutional Neural Networks (DCNNs) have shown remarkable success in image classification tasks, but optimizing their hyperparameters can be challenging due to their complex structure. This paper develops the Adaptive Habitat Biogeog...

DOAJ Open Access (DOAJ) DOI: 10.1016/j.heliyon.2024.e28147

Research on scheduling strategy for automated storage and retrieval system

Sai Geng, Lei Wang, Dongdong Li, Benchi Jiang et al. • CAAI Transactions on Intelligence Technology (2022)

Abstract With the continuous and rapid growth of transport demand, scheduling strategy of warehouse has become a key issue in the field of logistics transportation. The structural differences of the warehouse, the automated storage and retr...

DOAJ Open Access (DOAJ) DOI: 10.1049/cit2.12066

Investigations on Rockmass Structure Characteristics and Mechanical Mining Efficiency and Economics in the Jinchuan No. 3 Mine With Hard Rock

Jian Zhao, Dan Huang, Daming Zhu, Mingyue Wang et al. • Advances in Civil Engineering (2026)

Geomechanical characterization is crucial for assessing the feasibility of the mechanical construction method in geotechnical engineering, which is a construction method that neither uses explosives nor involves blasting operations. But for...

DOAJ Open Access (DOAJ) DOI: 10.1155/adce/2598677

Micro‐/Nanohierarchical Surfaces for Enhanced Pool Boiling in Large‐Area Silicon Multichips

Youngseob Lee, Kiwan Kim, Yunseo Kim, Daeyoung Kong et al. • Small Structures (2025)

With the rising demand for data centers, the need for an efficient thermal management approach becomes increasingly critical. This study examines the enhancement in pool boiling heat transfer on a customized multichip module, designed to mi...

DOAJ Open Access (DOAJ) DOI: 10.1002/sstr.202400512